5秒后页面跳转
捷配首页

Datasheet > SST12LF01-QDE
SST12LF01-QDE PDF预览

SST12LF01-QDE

更新时间： 2024-09-20 21:12:51
品牌 Logo 应用领域
芯科 - SILICON 电信电信集成电路
页数 文件大小 规格书
20页 679K
描述
Telecom Circuit, 1-Func, 4 X 4 MM, ROHS COMPLIANT, MO-220J-WGGD-4, WQFN-24

阅读下载

中文翻译

获取价格

SST12LF01-QDE 技术参数

是否Rohs认证： 符合生命周期：Transferred
零件包装代码：QFN包装说明：HVQCCN,
针数：24Reach Compliance Code：unknown
HTS代码：8542.39.00.01风险等级：5.23
JESD-30 代码：S-XQCC-N24长度：4 mm
功能数量：1端子数量：24
最高工作温度：85 °C最低工作温度：
封装主体材料：UNSPECIFIED封装代码：HVQCCN
封装形状：SQUARE封装形式：CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度（摄氏度）：260认证状态：Not Qualified
座面最大高度：0.8 mm标称供电电压：3.3 V
表面贴装：YES电信集成电路类型：TELECOM CIRCUIT
温度等级：OTHER端子形式：NO LEAD
端子节距：0.5 mm端子位置：QUAD
处于峰值回流温度下的最长时间：40宽度：4 mm
Base Number Matches：1

SST12LF01-QDE 数据手册

 浏览型号SST12LF01-QDE的Datasheet PDF文件第2页浏览型号SST12LF01-QDE的Datasheet PDF文件第3页浏览型号SST12LF01-QDE的Datasheet PDF文件第4页浏览型号SST12LF01-QDE的Datasheet PDF文件第5页浏览型号SST12LF01-QDE的Datasheet PDF文件第6页浏览型号SST12LF01-QDE的Datasheet PDF文件第7页 
2.4 GHz Front-End Module  
SST12LF01  
SST12LF012.4 GHz Front-End Module  
Preliminary Specifications  
FEATURES:  
•
Gain:  
•
•
Low shut-down current (Typical 2.5 µA)  
Built-in, Ultra-low IREF power-up/down control  
– IREF <4 mA  
– Typically 12 dB gain across 2.4–2.5 GHz for  
Receiver (RX) chain.  
– Typically 29 dB gain across 2.4–2.5 GHz over tem-  
perature 0°C to +80°C for Transmitter (TX) chain.  
•
High-speed power-up/down  
– Turn on/off time (10%- 90%) <100 ns  
– Typical power-up/down delay with driver delay  
included <200 ns  
High temperature stability  
– ~1 dB gain/power variation between 0°C to +85°C  
Simple input/output matching  
Single positive power supply  
Packages available  
– 24-contact WQFN – 4mm x 4mm  
All non-Pb (lead-free) devices are RoHS compliant  
•
Low-Noise Figure  
– Typical 1.45 dB across 2.4–2.55 GHz  
50 Ω Input/Output matched along RX chain.  
IIP3  
– 3 dbm 2.4–2.55 GHz  
High linear output power:  
– >26.5 dBm P1dB  
– Meets 802.11g OFDM ACPR requirement up to  
23 dBm  
– ~3% added EVM up to 19 dBm for  
54 Mbps 802.11g signal  
•
•
•
•
•
•
•
•
– Meets 802.11b ACPR requirement up to 24 dBm  
•
•
High power-added efficiency/Low operating  
current for both 802.11g/b applications  
– ~22%/210 mA @ POUT = 22 dBm for 802.11g  
– ~26%/240 mA @ POUT = 23.5 dBm for 802.11b  
APPLICATIONS:  
•
•
•
WLAN  
Bluetooth  
Wireless Network  
Low idle current  
– ~70 mA ICQ  
PRODUCT DESCRIPTION  
The SST12LF01 is a 2.4 GHz Front-End Module (FEM)  
that combines a high-performance Low-Noise Amplifier  
(LNA) and a Power Amplifier (PA).  
achieved with only a single power supply and no external  
bias resistors or networks are required. The input and out-  
put ports are singled-ended 50 Ohm matched. RF ports  
are also DC isolated requiring no dc blocking capacitors or  
matching components to reduce system board Bill of Mate-  
rials (BOM) cost.  
Designed in compliance with IEEE 802.11 b/g applications  
and based on GaAs PHEMT/HBT technology, the  
SST12LF01 operates within the frequency range of 2.4–  
2.55 GHz at a very low DC-current consumption. There are  
two components to the FEM: the Receiver (RX) chain and  
the Transmitter (TX) chain.  
The TX chain includes a high-efficiency PA based on  
InGaP/GaAs HBT technology. The PA typically provides 30  
dB gain with 22% power-added efficiency at POUT = 22  
dBm for 802.11g and 27% power-added efficiency at POUT  
= 24 dBm for 802.11b.  
The RX chain consist of a cost effective Low-Noise Ampli-  
fier (LNA) cell which requires no external RF-matching  
components. This device is based on the 0.5m GaAs  
PHEMT technology, and complies with 802.11 b/g applica-  
tions.  
The Transmitter chain has excellent linearity, typically <4%  
added EVM up to 20 dBm output power, which is essential  
for 54 Mbps 802.11g operation while meeting 802.11g  
spectrum mask at 23 dBm.  
The LNA provides high-performance, low-noise, and mod-  
erate gain operation within the 2.4–2.55 GHz frequency  
band. Across this frequency band, the LNA typically pro-  
vides 12 dB gain and 1.45 dB noise figure.  
The SST12LF01 is offered in 24-contact WQFN package.  
See Figure 2 for pin assignments and Table 1 for pin  
descriptions.  
This LNA cell is designed with a self DC-biasing scheme,  
which maintains low DC current consumption, nominally at  
11 mA, during operation. Optimum performance is  
©2008 Silicon Storage Technology, Inc.  
The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc.  
These specifications are subject to change without notice.  
S71330-04-000  
1
11/08  
1234567...20

中文翻译

下载PDF

与SST12LF01-QDE相关器件

型号 品牌 获取价格 描述 数据表
SST12LF01-QDF SILICON

获取价格

 		Telecom Circuit, 1-Func, 4 X 4 MM, ROHS COMPLIANT, MO-220J-WGGD-4, WQFN-24
SST12LF01-QDF MICROCHIP

获取价格

 		SPECIALTY TELECOM CIRCUIT, QCC24, 4 X 4 MM, ROHS COMPLIANT, MO-220JWGGD-4, WQFN-24
SST12LF02 MICROCHIP

获取价格

 		2.4 GHz High-Gain, High-Efficiency Front-end Module Cordless phones
SST12LF02_15 MICROCHIP

获取价格

 		2.4 GHz WLAN High-Gain, High-Efficiency FEM
SST12LF02-QXCE MICROCHIP

获取价格

 		2.4 GHz High-Gain, High-Efficiency Front-end Module Cordless phones
SST12LF02-QXCE-K MICROCHIP

获取价格

 		2.4 GHz WLAN High-Gain, High-Efficiency FEM
SST12LF03 ETC

获取价格

 		2.4 GHz 高增益及高效率前端模块
SST12LF09 MICROCHIP

获取价格

 		2.4 GHz High-Gain, High-Efficiency Front-end Module
SST12LF09-Q3CE MICROCHIP

获取价格

 		2.4 GHz High-Gain, High-Efficiency Front-end Module
SST12LF09-Q3CE-K MICROCHIP

获取价格

 		2.4 GHz High-Gain, High-Efficiency Front-end Module

与SST12LF01-QDE相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证