SI SERIES
15 AND 30 WATTS
15 AND 30 WATTS - SI SERIES
Wide Input, Single/Dual/Triple Outputs
FEATURES
• Wide Input Voltage Range (2:1)
• Over Voltage Protection on All Models
• 12VDC Nominal Input - 25 VDC Surge,
24VDC Nominal Input - 50VDC Surge,
48VDC Nominal Input - 100VDC Surge
• Continuous short circuit protection - all outputs
• Efficiency: up to 85%
• Remote On/Off Control via TTL
• 85-200VDC and 170-400VDC Inputs Available
THE SI SERIES FROM WALL INDUSTRIES
The SI Series features a single case size (2.56 x 3.0 x
0.84”) for every unit - 15 to 30 watts. Specifications
include remote on/off, short circuit protection, Pi input fil-
ter, over-voltage protection and excellent line and load
regulation. SI Series units operate at case temperatures
from -25 to +85°C with no derating. Metallic case provid-
ed for shielding.
SPECIFICATIONS: SI SERIES
All specifications apply @ +25 C ambient unless otherwise
noted.
GENERAL SPECIFICATIONS
Efficiency...........................................................up to 85%
Isolation Voltage (input to output).................500VDC min.
Isolation Resistance (input to output)..............500MOhms
Switching Frequency..................................100kHz typical
INPUT SPECIFICATIONS
Input Voltages................................9-18, 18-36, 36-75VDC
Nominal Input..............................................12, 24, 48VDC
Input Filter......................................................Pi input filter
Remote On/Off Control........................Open collector TTL
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (case).......................-25 to +85°C
Storage Temperature...................................-55 to +100°C
Humidity (non-condensing)..........................20 - 95% R.H.
OUTPUT SPECIFICATIONS
Output Current.....................................................see table
Output Voltage Tolerance.................................... 1% max.
Output Trim (external)....................... 10%, single outputs
Line Regulation..................................................see note 4
Load Regulation.................................................see note 5
Short Circuit Protection...................continuous, all outputs
Ripple/Noise (20MHz BW)................................100mV p-p
Overvoltage Protection.........................................see table
PHYSICAL SPECIFICATIONS
Shielding.............................................................Six-sided
Weight.....................................................................7.5 oz.
Case Material...................................Black coated copper
..........................................with non-conductive baseplate
Due to advances in technology, specifications subject to
change without notice.
1
603 778 2300
WWW.WALLINDUSTRIES.COM