MAPC-104 PC/104-Plus Series
Non-Isolated, DC/DC Converters
3.3, 5.1 & 12.4, 46W Mobile Applications
FEATURES
nꢀ
46 Watts for Mobile Access Router to
IP/Networks
nꢀ
PC/104-Plus compatible/stackable, power-
ing Cisco system cards
nꢀ
9 to 32V input range, supporting both
12V and 24V vehicle batteries
Typical unit
nꢀ
Reverse input voltage protection
nꢀ
Automotive transient protection
nꢀ
Efficiency to 92.5% @ full load
PRODUCT OVERVIEW
nꢀ
No derating to +85°C, 100 lfm
Murata Power Solutions’ MAPC-104 non-isolated,
triple output DC/DC converter is designed to
power the Cisco 3200 Mobile Access Router and
is compliant to PC/104-Plus specifications. The
equipment ideally suites integration into public
The compact 3.775” x 3.55” x 0.60” (95.9 x
90.2 x 15.2mm) open frame, triple output DC/DC
power card is mechanically and electrically compli-
ant to PC/104-plus specifications. Operating with
the Cisco designed system cards, the MAPC-104
nꢀ
Independently regulated +3.3V, +5.1V
and +12V outputs
nꢀ
Power up/down sequencing
nꢀ
Low 25mVp-p ripple/noise
safety, defense, homeland security and commercial is considered part of the host, which requires the
n
Power good LED and external signal
transportation vehicles, whether on land, in water
or air, and is employed for powering secure data,
voice and video communications across multiple
wireless networks.
3.3V (but no –5V/–12V) supply provided.
Assembled using fully automated, SMT-on-pcb
techniques, MAPC-104s provide stable no-load
operation, excellent line and load regulation
( 1% max.), quick step response (200μsec), and
low output ripple/noise (25mVp-p).
All devices feature full I/O fault protection
including: input overvoltage and undervoltage
shutdown, power up/down sequencing, output
overvoltage, output current limiting, short-circuit
protection, power good (LED indicator and external
signal), overtemperature warning and thermal
shutdown.
nꢀ
Compact 3.775” × 3.55” × 0.6” package,
standard PC/104-plus pinout
nꢀ
Stable no-load condition
The MAPC-104 is a high performance, compact
and rugged power supply which operates in the
harshest conditions, withstanding input transient
voltages according to SAE J1455 and J1211. It
converts the vehicle’s standard battery voltage of
12V or 24V (Vin range from 9 to 32 Volts) to three
fully regulated outputs of 3.3V @ 6A, 5.1V @ 6.3A
and 12V @ 100mA up to a total output power of
46 Watts. Taking full advantage of a synchronous-
rectifier, buck/boost topology, MAPC-104’s boast
outstanding efficiency of up to 92.5%, enabling
full-power operation to ambient temperatures as
high as +85°C with 100 lfm air flow.
nꢀ
Thermal shutdown with warning
nꢀ
Fully I/O protected
nꢀ
UL/IEC/EN60950-1 certification pending
All models are certified to IEC/EN/UL60950-1
safety standards. Selected models include RoHS
compliance.
➀
Performance Specifications
Output
R/N (mVp-p) ➁
Input
Vin (Volts)
Io u t (Amps)
Regulation (Max.) ➂
Efficiency
Model
MAPC-104
Vo u t
(Volts)
Iin ➃
(mA/A)
Package/
Pinout
Nom.
5
Max.
6
Typ.
25
Max.
35
Line
1%
1%
1%
Load
1%
Nom.
Range
Min.
Typ.
Output 1
Output 2
Output 3
3.3
5.1
12
C46
See pages 2, 3
for Pinout
12
9-32
35/4
35/4
91%
92.5%
5.46
0.07
6.3
0.1
25
50
1%
24
9-32
89.5%
91%
20
35
1%
➀ Typical at Ta = +25°C under nominal line voltage and nominal-load conditions, unless noted.
➁ Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth. All models are specified
with an external 0.1µF multi-layer ceramic capacitor installed across each output pin.
➂ Devices have no minimum-load requirements and will regulate under no-load conditions.
Regulation specifications describe the output-voltage deviation as the line voltage or load
is varied from its midpoint value to either extreme.
➃ Nominal line voltage, no-load/full-load conditions.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_MAPC-104.A06 Page 1 of 7