GaN Amplifier 50 V, 200 W
2.9 - 3.3 GHz
MAPC-A1519
Rev. V1
Features
•
•
•
•
•
•
MACOM PURE CARBIDE® Amplifier Series
Suitable for Linear & Saturated Applications
CW & Pulsed Operation: 200 W Output Power
Internally Pre-Matched
50 V Operation
Compatible with MACOM Power Management
Bias Controller/Sequencer MABC-11040
AC-360B-2
Applications
Military Radio Communications, RADAR, Avionics,
Digital Cellular Infrastructure, RF Energy, and Test
Instrumentation.
Functional Schematic
Description
The MAPC-A1519 is a high power GaN on Silicon
Carbide HEMT D-mode amplifier suitable for
2.9 - 3.3 GHz frequency operation. The device
supports both CW and pulsed operation with
output power levels of at least 200 W (53.0 dBm)
in an air cavity ceramic package.
Typical Performance:
Measured under load-pull at 2.5 dB Compression,
100 µs pulse width, 10% duty cycle. VDS = 50 V,
IDQ = 300 mA, TC = 25°C.
Pin Configuration
2
Gain2
(dB)
D
Frequency Output Power1
(GHz)
(dBm)
(%)
1
2
3
RFIN / VG
RFOUT / VD
Flange3
RFIN / Gate
RFOUT / Drain
2.9
54.2
16.7
16.3
16.5
68.2
65.8
69.2
3.1
54.0
Ground / Source
3.3
53.8
3. The flange on the package bottom must be connected to RF,
DC and thermal ground.
1. Load impedance tuned for maximum output power.
2. Load impedance tuned for maximum drain efficiency.
Ordering Information
Part Number
Package
MAPC-A1519-AB000
MAPC-A1519-ABTR1
MAPC-A1519-ABSB1
Bulk Quantity
Tape and Reel
Sample Board
* Restrictions on Hazardous Substances, compliant to current RoHS EU directive.
1
MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit: https://www.macom.com/support
DC-0028541