AP2501/AP2511
2.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH
Description
Pin Assignments
The AP2501 and AP2511 are single channel current-limited
integrated high-side power switches optimized for Universal Serial
Bus (USB) and other hot-swap applications. The family of devices
complies with USB standards and is available with both polarities of
Enable input.
(Top View)
(Top View)
NC
GND
IN
1
2
3
4
8
7
6
5
1
2
3
4
8
7
6
5
NC
GND
IN
OUT
OUT
FLG
OUT
OUT
FLG
IN
IN
The devices have fast short-circuit response time for improved
overall system robustness, and have integrated output discharge
function to ensure completely controlled discharging of the output
voltage capacitor. They provide a complete protection solution for
applications subject to heavy capacitive loads and the prospect of
short circuit, and offer reverse current blocking, over-current, over-
temperature and short-circuit protection, as well as controlled rise
EN
EN
U-DFN3030-8
Type E
SO-8
(Top View)
NC
1
8
7
6
5
GND
IN
2
OUT
OUT
FLG
time and under-voltage lockout functionality.
A 7ms deglitch
3
4
IN
capability on the open-drain Flag output prevents false over-current
reporting and does not require any external components.
EN
MSOP-8/MSOP-8EP
Note: Latter with exposed pad
(dotted line)
All devices are available in SO-8, MSOP-8, MSOP-8EP and
U-DFN3030-8 Type E packages.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Single Channel Current-Limited Power Switch
Output Discharge Function
Applications
Fast Short-Circuit Response Time: 2µs
3.7A Accurate Current Limiting (typ)
•
•
•
•
LCD TVs & Monitors
Set-Top-Boxes, Residential Gateways
Reverse Current Blocking
Laptops, Desktops, Servers, e-Readers
Printers, Docking Stations, HUBs
70mΩ On-Resistance (typ)
Input Voltage Range: 2.7V – 5.5V
Built-In Soft-Start with 0.6ms Typical Rise Time
Over-Current and Thermal Protection
Fault Report (FLG) with Blanking Time (7ms typ)
ESD Protection: 3KV HBM, 300V MM
Active Low (AP2501) or Active High (AP2511) Enable
Ambient Temperature Range: -40°C to +85°C
SO-8, MSOP-8, MSOP-8EP and U-DFN3030-8 Type E:
Available in “Green” Molding Compound (No Br, Sb)
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
•
•
UL Recognized, File Number E322375
IEC60950-1 CB Scheme Certified
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
1 of 18
www.diodes.com
August 2012
© Diodes Incorporated
AP2501/AP2511
Document number: DS35577 Rev. 5 - 2