CY3672
PTG Programming Kit
Features
Functional Description
• Supports Field-programmable Clock Generators
The CY3672 programming kit enables any user with a PC to
quickly and easily program Field-programmable Clock Gener-
ators. The only set-up requirements are a power connection
and either a parallel port or USB port (CY3672-USB)
connection with the PC, as shown in Figure 2.
• CY2077FS, CY2077FZ, CY22050F, CY22150F,
CY22381F, CY22392F, CY22393F, CY22394F,
CY22395F, CY25100F, CY25200F, CY25701F,CY25702F
CY23FP12, CY26049, and CY27EE16
Using CyClocksRT™, (embedded in CyberClocks software) or
CyberClocks Online, users can configure their parts to a given
specification and generate the corresponding JEDEC file. In
addition, CyClocksRT software provides PPM optimization
and power calculations.
• Allows quick and easy prototyping
• Compact design for ease of portability
• Easy to use Microsoft® Windows® 95, 98, NT, 2K, ME,
XP-compatible interface
The JEDEC file is then loaded into CY3672 software that
communicates with the programmer. The CY3672 software
has the ability to read and view the EPROM table from a
programmed device. The programming flow is outlined in
Figure 1.
• User-friendly CyberClocks™ or CyberClocks Online
software for JEDEC file development
CY3672-PRG Kit Contents
• Parallel port cable
• AC/DC adapter
• Quick start guide
• User manual
Set Up
Hardware
The CY3672 programming kit has a very simple set-up
procedure. As shown in Figure 2, only two connections are
required. The programmer must be connected to a PC through
either a parallel port or USB port (CY3672-USB) and must
receive power through the AC/DC adapter that gets hooked up
to your standard 110V/220V wall outlet. When using the
parallel port, make sure the parallel port settings on your
computer is ECP or EPP. CY3672-PRG or CY3672-USB are
the programming base unit that can be ordered separately with
any individual socket adapter.
CY3672-FTG Development Kit Contents in
Addition to CY3672-PRG Contents
• Three Sockets: CY3695, CY3698, CY3699
CY3672-USB Kit Contents in Addition to
CY3672-PRG Contents
• USB Driver CD ROM
• USB Cable
CyClocksRT
CY3672 Software
Program m er
CY3672
Adapter
CyberClocks Online
Jedec
Bit
Stream
File
Figure 1. Programming Procedure
Cypress Semiconductor Corporation
Document #: 38-07409 Rev. *F
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised October 31, 2005