5秒后页面跳转
MPC9350FA PDF预览

MPC9350FA

更新时间: 2024-02-14 22:55:11
品牌 Logo 应用领域
摩托罗拉 - MOTOROLA 时钟驱动器
页数 文件大小 规格书
12页 284K
描述
PLL BASED CLOCK DRIVER, 9 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, 7 X 7 MM, PLASTIC, LQFP-32

MPC9350FA 技术参数

是否Rohs认证: 不符合生命周期:Transferred
零件包装代码:QFP包装说明:LQFP, QFP32,.35SQ,32
针数:32Reach Compliance Code:not_compliant
HTS代码:8542.39.00.01风险等级:5.46
其他特性:ALSO OPERATE AT 3.3V SUPPLY系列:9350
输入调节:MUXJESD-30 代码:S-PQFP-G32
JESD-609代码:e0长度:7 mm
逻辑集成电路类型:PLL BASED CLOCK DRIVER最大I(ol):0.015 A
湿度敏感等级:2功能数量:1
反相输出次数:端子数量:32
实输出次数:9最高工作温度:85 °C
最低工作温度:-40 °C输出特性:3-STATE
封装主体材料:PLASTIC/EPOXY封装代码:LQFP
封装等效代码:QFP32,.35SQ,32封装形状:SQUARE
封装形式:FLATPACK, LOW PROFILE峰值回流温度(摄氏度):220
电源:2.5/3.3 V认证状态:Not Qualified
Same Edge Skew-Max(tskwd):0.15 ns座面最大高度:1.6 mm
子类别:Clock Drivers最大供电电压 (Vsup):2.625 V
最小供电电压 (Vsup):2.375 V标称供电电压 (Vsup):2.5 V
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子面层:Tin/Lead (Sn/Pb)
端子形式:GULL WING端子节距:0.8 mm
端子位置:QUAD处于峰值回流温度下的最长时间:30
宽度:7 mm最小 fmax:100 MHz
Base Number Matches:1

MPC9350FA 数据手册

 浏览型号MPC9350FA的Datasheet PDF文件第2页浏览型号MPC9350FA的Datasheet PDF文件第3页浏览型号MPC9350FA的Datasheet PDF文件第4页浏览型号MPC9350FA的Datasheet PDF文件第5页浏览型号MPC9350FA的Datasheet PDF文件第6页浏览型号MPC9350FA的Datasheet PDF文件第7页 
Freescale Semiconductor, Inc.  
SEMICONDUCTOR TECHNICAL DATA  
Order Number: MPC9350/D  
Rev 3, 01/2002  
The MPC9350 is a 2.5V and 3.3V compatible, PLL based clock  
generator targeted for high performance clock distribution systems. With  
output frequencies of up to 200 MHz and maximum output skews of 150  
ps the MPC9350 is ideal for the most demanding clock tree designs. The  
device offers 9 low skew clock outputs, each is configurable to support the  
clocking needs of the various high-performance microprocessors  
including the PowerQuicc II integrated communication microprocessor.  
The extended temperature range of the MPC9350 supports  
telecommunication and networking requirements. The devices employs a  
fully differential PLL design to minimize cycle-to-cycle and long-term jitter.  
LOW VOLTAGE  
3.3V AND 2.5V PLL  
CLOCK GENERATOR  
Features  
9 outputs LVCMOS PLL clock generator  
25 – 200 MHz output frequency range  
2.5V and 3.3V compatible  
Compatible to various microprocessor such as PowerQuicc II  
Supports networking, telecommunications and computer applications  
Fully integrated PLL  
Configurable outputs: divide-by-2, 4 and 8 of VCO frequency  
Selectable output to input frequency ratio of 8:1, 4:1, 2:1 or 1:1  
Oscillator or crystal reference inputs  
Internal PLL feedback  
FA SUFFIX  
32 LEAD LQFP PACKAGE  
CASE 873A  
Output disable  
PLL enable/disable  
Low skew characteristics: maximum 150 ps output-to-output  
32 lead LQFP package  
Temperature range –40°C to +85°C  
Functional Description  
The MPC9350 generates high frequency clock signals and provides nine exact frequency-multiplied copies of the reference  
clock signal. The internal PLL allows the MPC9350 to operate in frequency locked condition and to multiply the input reference  
clock. The reference clock frequency and the divider in the internal feedback path determine the VCO frequency. Two selectable  
PLL feedback frequency ratios are available on the MPC9350 to provide input frequency range flexibility. The FBSEL pin selects  
between divide-by-16 or divide-by-32 of the VCO frequency for PLL feedback. This feedback divider must be selected to match  
the VCO frequency range. With the available feedback output dividers the internal VCO of the MPC9350 is running at either 16x  
or 32x of the reference clock frequency. The frequency of the QA, QB, QC and QD outputs is either one half, one fourth or one  
eighth of the selected VCO frequency and can be configured for each output bank using the FSELA, FSELB, FSELC and FSELD  
pins, respectively. The available output to input frequency ratios are 16:1, 8:1, 4:1 and 2:1. The REF_SEL pin selects the crystal  
oscillator inputs or the LVCMOS compatible reference input (TCLK). TCLK also provides an external test clock in static test mode  
when the PLL enable pin (PLL_EN) is pulled to logic low state. In test mode, the selected input reference clock is routed directly to  
the output dividers without using the PLL. The test mode is intended for system diagnostics, test and debug purpose. This test  
mode is fully static and the minimum clock frequency specification does not apply. The outputs can be disabled by deasserting  
the OE pin (logic high state). In PLL mode, deasserting OE maintains PLL lock due to the internal feedback path. The MPC9350 is  
fully 2.5V and 3.3V compatible and requires no external loop filter components. The on-chip crystal oscillator requires no external  
components beyond a series resonant crystal. All inputs except the crystal oscillator interface accept LVCMOS signals while the  
outputs provide LVCMOS compatible levels with the capability to drive terminated 50 transmission lines. For series terminated  
transmission lines, each of the MPC9350 outputs can drive one or two traces giving the devices an effective fanout of 1:18. The  
2
device is packaged in a 7x7 mm 32-lead LQFP package.  
For More Information On This Product,  
Motorola, Inc. 2002  
Go to: www.freescale.com  

与MPC9350FA相关器件

型号 品牌 获取价格 描述 数据表
MPC9350FAR2 NXP

获取价格

9350 SERIES, PLL BASED CLOCK DRIVER, 9 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, 7 X 7
MPC9350FAR2 MOTOROLA

获取价格

PLL Based Clock Driver, 9 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, PLASTIC,
MPC9351 FREESCALE

获取价格

Low Voltage PLL Clock Driver
MPC9351AC NXP

获取价格

9351 SERIES, PLL BASED CLOCK DRIVER, 9 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, 7 X 7
MPC9351ACR2 NXP

获取价格

9351 SERIES, PLL BASED CLOCK DRIVER, 9 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, 7 X 7
MPC9351D FREESCALE

获取价格

Low Voltage PLL Clock Driver
MPC9351FA IDT

获取价格

PLL Based Clock Driver, 9351 Series, 9 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7
MPC9351FA MOTOROLA

获取价格

PLL Based Clock Driver, 9 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, LQFP-32
MPC9351FAR2 IDT

获取价格

暂无描述
MPC9351FAR2 MOTOROLA

获取价格

PLL Based Clock Driver, 9 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, LQFP-32