5秒后页面跳转
2N7002K-T1-E3 PDF预览

2N7002K-T1-E3

更新时间: 2024-01-31 03:05:47
品牌 Logo 应用领域
威世 - VISHAY 晶体小信号场效应晶体管开关光电二极管
页数 文件大小 规格书
9页 219K
描述
N-Channel 60-V (D-S) MOSFET

2N7002K-T1-E3 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOT-23
包装说明:SMALL OUTLINE, R-PDSO-G3针数:3
Reach Compliance Code:unknownECCN代码:EAR99
风险等级:5其他特性:LOW THRESHOLD, ESD PROTECTION, FAST SWITCHING
配置:SINGLE WITH BUILT-IN DIODE最小漏源击穿电压:60 V
最大漏极电流 (ID):0.3 A最大漏源导通电阻:4 Ω
FET 技术:METAL-OXIDE SEMICONDUCTORJEDEC-95代码:TO-236AB
JESD-30 代码:R-PDSO-G3JESD-609代码:e3
湿度敏感等级:1元件数量:1
端子数量:3工作模式:ENHANCEMENT MODE
最高工作温度:150 °C最低工作温度:-55 °C
封装主体材料:PLASTIC/EPOXY封装形状:RECTANGULAR
封装形式:SMALL OUTLINE极性/信道类型:N-CHANNEL
功耗环境最大值:0.35 W最大功率耗散 (Abs):0.35 W
认证状态:Not Qualified表面贴装:YES
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子位置:DUAL晶体管应用:SWITCHING
晶体管元件材料:SILICONBase Number Matches:1

2N7002K-T1-E3 数据手册

 浏览型号2N7002K-T1-E3的Datasheet PDF文件第3页浏览型号2N7002K-T1-E3的Datasheet PDF文件第4页浏览型号2N7002K-T1-E3的Datasheet PDF文件第5页浏览型号2N7002K-T1-E3的Datasheet PDF文件第6页浏览型号2N7002K-T1-E3的Datasheet PDF文件第8页浏览型号2N7002K-T1-E3的Datasheet PDF文件第9页 
AN807  
Vishay Siliconix  
Mounting LITTLE FOOTR SOT-23 Power MOSFETs  
Wharton McDaniel  
Surface-mounted LITTLE FOOT power MOSFETs use integrated  
circuit and small-signal packages which have been been modified  
to provide the heat transfer capabilities required by power devices.  
Leadframe materials and design, molding compounds, and die  
attach materials have been changed, while the footprint of the  
packages remains the same.  
ambient air. This pattern uses all the available area underneath the  
body for this purpose.  
0.114  
2.9  
0.081  
2.05  
See Application Note 826, Recommended Minimum Pad  
Patterns With Outline Drawing Access for Vishay Siliconix  
MOSFETs, (http://www.vishay.com/doc?72286), for the basis  
of the pad design for a LITTLE FOOT SOT-23 power MOSFET  
footprint . In converting this footprint to the pad set for a power  
device, designers must make two connections: an electrical  
connection and a thermal connection, to draw heat away from the  
package.  
0.150  
3.8  
0.059  
1.5  
0.0394  
1.0  
0.037  
0.95  
FIGURE 1. Footprint With Copper Spreading  
The electrical connections for the SOT-23 are very simple. Pin 1 is  
the gate, pin 2 is the source, and pin 3 is the drain. As in the other  
LITTLE FOOT packages, the drain pin serves the additional  
function of providing the thermal connection from the package to  
the PC board. The total cross section of a copper trace connected  
to the drain may be adequate to carry the current required for the  
application, but it may be inadequate thermally. Also, heat spreads  
in a circular fashion from the heat source. In this case the drain pin  
is the heat source when looking at heat spread on the PC board.  
Since surface-mounted packages are small, and reflow soldering  
is the most common way in which these are affixed to the PC  
board, “thermal” connections from the planar copper to the pads  
have not been used. Even if additional planar copper area is used,  
there should be no problems in the soldering process. The actual  
solder connections are defined by the solder mask openings. By  
combining the basic footprint with the copper plane on the drain  
pins, the solder mask generation occurs automatically.  
Figure 1 shows the footprint with copper spreading for the SOT-23  
package. This pattern shows the starting point for utilizing the  
board area available for the heat spreading copper. To create this  
pattern, a plane of copper overlies the drain pin and provides  
planar copper to draw heat from the drain lead and start the  
process of spreading the heat so it can be dissipated into the  
A final item to keep in mind is the width of the power traces. The  
absolute minimum power trace width must be determined by the  
amount of current it has to carry. For thermal reasons, this  
minimum width should be at least 0.020 inches. The use of wide  
traces connected to the drain plane provides a low-impedance  
path for heat to move away from the device.  
Document Number: 70739  
26-Nov-03  
www.vishay.com  
1

与2N7002K-T1-E3相关器件

型号 品牌 描述 获取价格 数据表
2N7002KT1G ONSEMI Small Signal MOSFET 60 V, 380 mA, Single, N−Channel, SOT−23

获取价格

2N7002KT1G ROCHESTER 320mA, 60V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-236, HALOGEN FREE AND ROHS COMPLIANT,

获取价格

2N7002K-T1-GE3 VISHAY N-Channel 60-V (D-S) MOSFET

获取价格

2N7002KT1H ONSEMI 320mA, 60V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-236, HALOGEN FREE AND ROHS COMPLIANT,

获取价格

2N7002KT3G ONSEMI Small Signal MOSFET 60 V, 380 mA, Single, Nâˆ

获取价格

2N7002KTB PANJIT 60V N-Channel Enhancement Mode MOSFET - ESD Protected

获取价格