NCP5173
1.5 A 560 kHz−1.0 MHz
Boost Regulator
The NCP5173 is a switching regulator with a high efficiency, 1.5 A
integrated switch. It runs at a base frequency of 560 kHz and can be
synchronized to an external clock up to 1.0 MHz. This part operates
over a wide input voltage range, from 2.7 V to 30 V. The flexibility of
the design allows the chip to operate in most power supply
configurations, including boost, flyback, forward, inverting, and
SEPIC. The IC uses current mode architecture, which allows excellent
load and line regulation, as well as a practical means for limiting
current. Combining high frequency operation with a highly integrated
regulator circuit results in an extremely compact power supply
solution. The circuit design includes provisions for features such as
frequency synchronization, shutdown, and feedback controls for
positive voltage regulation.
http://onsemi.com
MARKING
DIAGRAM
1
NCP5173
AWLYYWW
5x6 QFN
MN SUFFIX
CASE 505AC
Features
• Integrated Power Switch: 1.5 A Guaranteed
• Wide Input Range: 2.7 V to 30 V
• High Frequency Allows for Small Components
• Minimum External Components
• Easy External Synchronization
• Built−in Overcurrent Protection
NCP5173= Specific Device Code
A
= Assembly Location
= Wafer Lot
= Year
WL
YY
WW
= Work Week
NOTE: Thermal pad is electrically isolated from IC
and all pins.
• Frequency Foldback Reduces Component Stress During an
Overcurrent Condition
• Thermal Shutdown with Hysteresis
• Low 1.0 mm Maximum Profile
ORDERING INFORMATION
†
Device
Package
QFN
Shipping
• Shut Down Current: 50 mA Maximum
NCP5173MN
NCP5173MNR2
95 Units/Rail
Applications
QFN
2500 Tape & Reel
• Flat Panel Displays
• Systems Requiring Low Profile Components
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
September, 2004 − Rev. 1
NCP5173/D