Data Sheet
ADRF5054
1 GHz to 60 GHz, Reflective, Silicon SP4T Switch
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► Ultrawideband frequency range: 1 GHz to 60 GHz
► Low insertion loss
► 2.2 dB typical up to 40 GHz
► 2.8 dB typical up to 55 GHz
► 3.2 dB typical up to 60 GHz
► High isolation
► 33 dB typical up to 40 GHz
► 28 dB typical up to 55 GHz
► 28 dB typical up to 60 GHz
► High input linearity
► P0.1dB: 25 dBm typical
Figure 1. Functional Block Diagram
► IP3: 47 dBm typical
GENERAL DESCRIPTION
► High RF power handling
► Through path: 24 dBm
The ADRF5054 is a reflective, SP4T switch manufactured in a
silicon process. The ADRF5054 operates from 1 GHz to 60 GHz.
The switch has a low insertion loss of 2.2 dB and 3.2 dB with
33 dB and 28 dB isolation at 40 GHz and 60 GHz, respectively.
The ADRF5054 has an RF input power handling capability of 24
dBm for the through and hot switching paths. The ADRF5054
requires dual-supply voltages of ±3.3 V. The ADRF5054 employs
► Hot switching path: 24 dBm
► CMOS-/LVTTL-compatible
► No low frequency spur
► Fast RF switching time: 25 ns
► RF settling time (50% VCTRL to 0.1 dB of RFOUT): 35 ns
► Single-supply operation capability (VDD = 3.3 V, VSS = 0 V)
► 24-terminal, 3 mm × 3 mm, RoHS-compliant, LGA package
complementary metal-oxide semiconductor (CMOS)- and low volt-
age transistor logic (LVTTL)-compatible control.
The ADRF5054 can also operate with a single positive supply volt-
age (VDD) applied while the negative supply voltage (VSS) is tied to
ground. In this operating condition, the small signal performance is
maintained while the switching characteristics, linearity, and power
handling performance are derated (see Table 2 for more details).
APPLICATIONS
► Industrial scanners
► Test instrumentation
► Cellular infrastructure—mmWave 5G
► Military radios, radars, and electronic counter measures (ECMs)
► Microwave radios and very small aperture terminals (VSATs)
The ADRF5054 comes in a 24-terminal, 3 mm × 3 mm, RoHS
compliant, land grid array (LGA) package and can operate from
−40°C to +105°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT