5秒后页面跳转
SNJ54LVT574FK PDF预览

SNJ54LVT574FK

更新时间: 2024-11-03 23:03:19
品牌 Logo 应用领域
德州仪器 - TI 触发器输出元件
页数 文件大小 规格书
15页 468K
描述
3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

SNJ54LVT574FK 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Obsolete零件包装代码:QLCC
包装说明:QCCN, LCC20,.35SQ针数:20
Reach Compliance Code:not_compliantHTS代码:8542.39.00.01
Factory Lead Time:1 week风险等级:5.52
其他特性:BROADSIDE VERSION OF 374系列:LVT
JESD-30 代码:S-CQCC-N20长度:8.89 mm
负载电容(CL):50 pF逻辑集成电路类型:BUS DRIVER
最大频率@ Nom-Sup:150000000 Hz最大I(ol):0.048 A
位数:8功能数量:1
端口数量:2端子数量:20
最高工作温度:125 °C最低工作温度:-55 °C
输出特性:3-STATE输出极性:TRUE
封装主体材料:CERAMIC, METAL-SEALED COFIRED封装代码:QCCN
封装等效代码:LCC20,.35SQ封装形状:SQUARE
封装形式:CHIP CARRIER峰值回流温度(摄氏度):NOT SPECIFIED
电源:3.3 V最大电源电流(ICC):14 mA
Prop。Delay @ Nom-Sup:6.1 ns传播延迟(tpd):6.8 ns
认证状态:Not Qualified筛选级别:MIL-PRF-38535
座面最大高度:2.03 mm子类别:FF/Latches
最大供电电压 (Vsup):3.6 V最小供电电压 (Vsup):2.7 V
标称供电电压 (Vsup):3.3 V表面贴装:YES
技术:BICMOS温度等级:MILITARY
端子形式:NO LEAD端子节距:1.27 mm
端子位置:QUAD处于峰值回流温度下的最长时间:NOT SPECIFIED
触发器类型:POSITIVE EDGE宽度:8.89 mm
Base Number Matches:1

SNJ54LVT574FK 数据手册

 浏览型号SNJ54LVT574FK的Datasheet PDF文件第2页浏览型号SNJ54LVT574FK的Datasheet PDF文件第3页浏览型号SNJ54LVT574FK的Datasheet PDF文件第4页浏览型号SNJ54LVT574FK的Datasheet PDF文件第5页浏览型号SNJ54LVT574FK的Datasheet PDF文件第6页浏览型号SNJ54LVT574FK的Datasheet PDF文件第7页 
SN54LVT574, SN74LVT574  
3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS  
WITH 3-STATE OUTPUTS  
SCBS139D – MAY 1992 – REVISED JULY 1995  
SN54LVT574 . . . J OR W PACKAGE  
SN74LVT574 . . . DB, DW, OR PW PACKAGE  
(TOP VIEW)  
State-of-the-Art Advanced BiCMOS  
Technology (ABT) Design for 3.3-V  
Operation and Low Static Power  
Dissipation  
OE  
1D  
2D  
3D  
4D  
5D  
6D  
7D  
8D  
V
CC  
1
2
3
4
5
6
7
8
9
10  
20  
19  
18  
17  
16  
15  
14  
Support Mixed-Mode Signal Operation (5-V  
Input and Output Voltages With 3.3-V V  
1Q  
2Q  
3Q  
4Q  
5Q  
6Q  
)
CC  
Support Unregulated Battery Operation  
Down to 2.7 V  
Typical V  
< 0.8 V at V  
(Output Ground Bounce)  
OLP  
= 3.3 V, T = 25°C  
CC  
A
13 7Q  
12 8Q  
ESD Protection Exceeds 2000 V Per  
MIL-STD-883C, Method 3015; Exceeds  
200 V Using Machine Model  
(C = 200 pF, R = 0)  
11  
GND  
CLK  
SN54LVT574 . . . FK PACKAGE  
(TOP VIEW)  
Latch-Up Performance Exceeds 500 mA  
Per JEDEC Standard JESD-17  
Bus-Hold Data Inputs Eliminate the Need  
for External Pullup Resistors  
Support Live Insertion  
3
2
1
20 19  
18  
4
5
6
7
8
3D  
4D  
5D  
6D  
7D  
2Q  
3Q  
4Q  
5Q  
6Q  
Package Options Include Plastic  
Small-Outline (DW), Shrink Small-Outline  
(DB), and Thin Shrink Small-Outline (PW)  
Packages, Ceramic Chip Carriers (FK),  
Ceramic Flat (W) Packages, and Ceramic  
(J) DIPs  
17  
16  
15  
14  
9 10 11 12 13  
description  
These octal flip-flops are designed specifically for low-voltage (3.3-V) V  
provide a TTL interface to a 5-V system environment.  
operation, but with the capability to  
CC  
The eight flip-flops of the LVT574 are edge-triggered D-type flip-flops. On the positive transition of the clock  
(CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs.  
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high  
or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive  
the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus  
lines without need for interface or pullup components. OE does not affect the internal operations of the flip-flops.  
Old data can be retained or new data can be entered while the outputs are in the high-impedance state.  
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.  
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup  
CC  
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.  
The SN74LVT574 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count  
and functionality of standard small-outline packages in less than half the printed-circuit-board area.  
The SN54LVT574 is characterized for operation over the full military temperature range of 55°C to 125°C. The  
SN74LVT574 is characterized for operation from 40°C to 85°C.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Copyright 1995, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  

与SNJ54LVT574FK相关器件

型号 品牌 获取价格 描述 数据表
SNJ54LVT574J TI

获取价格

3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SNJ54LVT574W TI

获取价格

3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SNJ54LVT639FK TI

获取价格

LVT SERIES, 8-BIT TRANSCEIVER, TRUE OUTPUT, CQCC20
SNJ54LVT639J TI

获取价格

LVT SERIES, 8-BIT TRANSCEIVER, TRUE OUTPUT, CDIP20
SNJ54LVT646FK TI

获取价格

3.3V ABT Octal Bus Transceivers and Registers with 3-State Outputs 28-LCCC -55 to 125
SNJ54LVT760FK TI

获取价格

LVT SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, CQCC28
SNJ54LVT760J TI

获取价格

LVT SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, CDIP20
SNJ54LVT8986HV TI

获取价格

3.3-V LINKING ADDRESSABLE SCAN PORTS MULTIDROP-ADDRESSABLE IEEE STD 1149.1 (JTAG) TAP TRAN
SNJ54LVTH125FK TI

获取价格

3.3-V ABT QUADRUPLE BUS BUFFERS WITH 3-STATE OUTPUTS
SNJ54LVTH125J TI

获取价格

3.3-V ABT QUADRUPLE BUS BUFFERS WITH 3-STATE OUTPUTS