3.3 V 1:8 LVCMOS PLL Clock Generator
MPC9653A
NRND
DATASHEET
NRND – Not Recommend for New Designs
The MPC9653A is a 3.3 V compatible, 1:8 PLL based clock generator and
zero-delay buffer targeted for high performance low-skew clock distribution in
mid-range to high-performance telecom, networking and computing applications.
With output frequencies up to 125 MHz and output skews less than 150 ps the
device meets the needs of the most demanding clock applications.
MPC9653A
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1:8 PLL based low-voltage clock generator
Supports zero-delay operation
LOW VOLTAGE
3.3 V LVCMOS 1:8
PLL CLOCK GENERATOR
3.3 V power supply
Generates clock signals up to 125 MHz
PLL guaranteed to lock down to 145 MHz, output frequency = 36.25 MHz
Maximum output skew of 150 ps
Differential LVPECL reference clock input
External PLL feedback
Drives up to 16 clock lines
FA SUFFIX
32-LEAD LQFP PACKAGE
CASE 873A-03
32-lead LQFP packaging
32-lead Pb-free Package Available
Ambient temperature range 0C to +70C
Pin and function compatible to the MPC953 and MPC9653
NRND – Not Recommend for New Designs
AC SUFFIX
32-LEAD LQFP PACKAGE
Pb-FREE PACKAGE
CASE 873A-03
The MPC9653A utilizes PLL technology to frequency lock its outputs onto an
input reference clock. Normal operation of the MPC9653A requires the connec-
tion of the QFB output to the feedback input to close the PLL feedback path (ex-
ternal feedback). With the PLL locked, the output frequency is equal to the
reference frequency of the device and VCO_SEL selects the operating frequency range of 25 to 62.5 MHz or 50 to 125 MHz. The
two available post-PLL dividers selected by VCO_SEL (divide-by-4 or divide-by-8) and the reference clock frequency determine
the VCO frequency. Both must be selected to match the VCO frequency range. The internal VCO of the MPC9653A is running
at either 4x or 8x of the reference clock frequency. The MPC9653A is guaranteed to lock in a low power PLL mode in the high
frequency range (VCO_SEL = 0) down to PLL = 145 MHz or Fref = 36.25 MHz.
The MPC9653A has a differential LVPECL reference input along with an external feedback input. The device is ideal for use
as a zero delay, low skew fanout buffer. The device performance has been tuned and optimized for zero delay performance.
The PLL_EN and BYPASS controls select the PLL bypass configuration for test and diagnosis. In this configuration, the se-
lected input reference clock is bypassing the PLL and routed either to the output dividers or directly to the outputs. The PLL by-
pass configurations are fully static and the minimum clock frequency specification and all other PLL characteristics do not apply.
The outputs can be disabled (high-impedance) and the device reset by asserting the MR/OE pin. Asserting MR/OE also causes
the PLL to loose lock due to missing feedback signal presence at FB_IN. Deasserting MR/OE will enable the outputs and close
the phase locked loop, enabling the PLL to recover to normal operation.
The MPC9653A is fully 3.3 V compatible and requires no external loop filter components. The inputs (except PCLK) accept
LVCMOS signals while the outputs provide LVCMOS compatible levels with the capability to drive terminated 50 transmission
lines. For series terminated transmission lines, each of the MPC9653A outputs can drive one or two traces giving the devices an
effective fanout of 1:16. The device is packaged in a 7x7 mm2 32-lead LQFP package.
MPC9653A REVISION 4 JANUARY 8, 2013
1
©2013 Integrated Device Technology, Inc.