5秒后页面跳转
STP16DPP05 PDF预览

STP16DPP05

更新时间: 2024-11-24 01:08:27
品牌 Logo 应用领域
意法半导体 - STMICROELECTRONICS /
页数 文件大小 规格书
34页 1406K
描述
Short and open output error detection

STP16DPP05 数据手册

 浏览型号STP16DPP05的Datasheet PDF文件第2页浏览型号STP16DPP05的Datasheet PDF文件第3页浏览型号STP16DPP05的Datasheet PDF文件第4页浏览型号STP16DPP05的Datasheet PDF文件第5页浏览型号STP16DPP05的Datasheet PDF文件第6页浏览型号STP16DPP05的Datasheet PDF文件第7页 
STP16DPP05  
Low voltage 16-bit constant current LED sink driver with output  
error detection  
Datasheet - production data  
feeds a 16- bit D-type storage register. In the  
output stage, sixteen regulated current sources  
are designed to provide 3 to 40 mA of constant  
current to drive the LEDs. The STP16DPP05  
features open and short LED detection on the  
outputs. The detection circuit checks for 3  
different conditions that can occur on the output  
line: short to GND, short to VO or open line. The  
data detection results are loaded in the shift  
registers and shifted out via the serial line output.  
The detection functionality is implemented  
without increasing the pin count, through a  
secondary function of the output enable and latch  
pin (DM1 and DM2 respectively). A dedicated  
Features  
logic sequence allows the device to enter or exit  
from detection mode. The STP16DPP05 output  
current can be adjusted through an external  
resistor to control the light intensity of the LEDs.  
LED brightness is adjustable from 0% to 100%  
Low voltage power supply down to 3 V  
16 constant current output channels  
Adjustable output current through external  
resistor  
via the OE/DM2 pin. The STP16DPP05  
Short and open output error detection  
Serial data IN/parallel data OUT  
3.3 V MCU-driving capability  
Output current: 3 to 40 mA  
30 MHz clock frequency  
Available in high thermal efficiency TSSOP  
exposed pad  
guarantees a 20 V output driving capability,  
allowing users to connect more LEDs in series.  
The high 30 MHz clock frequency makes the  
device suitable for high data rate transmission.  
The 3.3 V supply is well suited for applications  
which interface a 3.3 V MCU. Compared to a  
standard TSSOP package, the TSSOP with  
exposed pad increases heat dissipation capability  
by a factor of 2.5.  
ESD protection: 2 kV HBM, 200 V MM  
Description  
The STP16DPP05 is a monolithic, low voltage,  
low current power 16-bit shift register designed  
for LED panel displays. The device features a  
16-bit serial-in, parallel-out shift register that  
Table 1: Device summary  
Order code  
Package  
Packing  
STP16DPP05MTR  
STP16DPP05TTR  
STP16DPP05XTTR  
STP16DPP05PTR  
SO-24 (tape and reel)  
TSSOP24 (tape and reel)  
TSSOP24 exposed pad (tape and reel)  
QSOP-24  
1000 parts per reel  
2500 parts per reel  
2500 parts per reel  
2500 parts per reel  
April 2017  
DocID16518 Rev 4  
1/34  
www.st.com  
This is information on a product in full production.  

与STP16DPP05相关器件

型号 品牌 获取价格 描述 数据表
STP16DPP05MTR STMICROELECTRONICS

获取价格

Short and open output error detection
STP16DPP05PTR STMICROELECTRONICS

获取价格

Low voltage 16-bit constant current LED sink driver with output error detection
STP16DPP05TTR STMICROELECTRONICS

获取价格

Short and open output error detection
STP16DPP05XTTR STMICROELECTRONICS

获取价格

Short and open output error detection
STP16DPPS05 STMICROELECTRONICS

获取价格

Low voltage 16-bit constant current LED sink driver with output error detection and auto p
STP16DPPS05MTR STMICROELECTRONICS

获取价格

Low voltage 16-bit constant current LED sink driver with output error detection and auto p
STP16DPPS05PTR STMICROELECTRONICS

获取价格

Low-voltage 16-bit constant current LED sink driver with outputs error detection and auto-
STP16DPPS05TTR STMICROELECTRONICS

获取价格

Low voltage 16-bit constant current LED sink driver with output error detection and auto p
STP16DPPS05XTTR STMICROELECTRONICS

获取价格

Low voltage 16-bit constant current LED sink driver with output error detection and auto p
STP16DPS05 STMICROELECTRONICS

获取价格

Low voltage 16-bit constant current LED Sink driver with outputs error detection