5秒后页面跳转
SI9910DY-T1 PDF预览

SI9910DY-T1

更新时间: 2024-02-14 14:38:28
品牌 Logo 应用领域
威世 - VISHAY 驱动器MOSFET驱动器驱动程序和接口接口集成电路光电二极管信息通信管理
页数 文件大小 规格书
5页 53K
描述
Adaptive Power MOSFET Driver1

SI9910DY-T1 技术参数

是否无铅: 含铅生命周期:Obsolete
零件包装代码:SOIC包装说明:SOP, SOP8,.25
针数:8Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.8Is Samacsys:N
高边驱动器:YES输入特性:SCHMITT TRIGGER
接口集成电路类型:BUFFER OR INVERTER BASED MOSFET DRIVERJESD-30 代码:R-PDSO-G8
JESD-609代码:e0长度:4.9 mm
功能数量:1端子数量:8
最高工作温度:85 °C最低工作温度:-40 °C
输出特性:TOTEM-POLE标称输出峰值电流:1 A
输出极性:TRUE封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装等效代码:SOP8,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):240电源:10.8/16.5 V
认证状态:Not Qualified座面最大高度:1.75 mm
子类别:MOSFET Drivers最大供电电压:16.5 V
最小供电电压:10.8 V表面贴装:YES
技术:BICMOS温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn/Pb)端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:30宽度:3.9 mm
Base Number Matches:1

SI9910DY-T1 数据手册

 浏览型号SI9910DY-T1的Datasheet PDF文件第2页浏览型号SI9910DY-T1的Datasheet PDF文件第3页浏览型号SI9910DY-T1的Datasheet PDF文件第4页浏览型号SI9910DY-T1的Datasheet PDF文件第5页 
Si9910  
Vishay Siliconix  
Adaptive Power MOSFET Driver1  
FEATURES  
D dv/dt and di/dt Control  
D Undervoltage Protection  
D Short-Circuit Protection  
D trr Shoot-Through Current Limiting  
D Low Quiescent Current  
D Compatible with Wide Range of MOSFET Devices  
D Bootstrap and Charge Pump Compatible  
(High-Side Drive)  
D CMOS Compatible Inputs  
DESCRIPTION  
The Si9910 Power MOSFET driver provides optimized gate  
drive signals, protection circuitry and logic level interface. Very  
low quiescent current is provided by a CMOS buffer and a  
high-current emitter-follower output stage. This efficiency  
allows operation in high-voltage bridge applications with  
Fault protection circuitry senses an undervoltage or output  
short-circuit condition and disables the power MOSFET.  
Addition of one external resistor limits maximum di/dt of the  
external Power MOSFET. A fast feedback circuit may be used  
to limit shoot-through current during trr (diode reverse recovery  
time) in a bridge configuration.  
“bootstrap” or “charge-pump”  
techniques.  
floating power supply  
The non-inverting output configuration minimizes current  
drain for an n-channel “on” state. The logic input is internally  
diode clamped to allow simple pull-down in high-side drives.  
The Si9910 is available in 8-pin plastic DIP and SOIC  
packages, and are specified over the industrial, D suffix (40  
to 85_C) temperature range. In SOIC-8 packaging both  
standard and lead (Pb)-free options are available.  
FUNCTIONAL BLOCK DIAGRAM  
R3  
V
DS  
*100 kW  
V
DD  
C1  
DRAIN  
Undervoltage/  
Overcurrent  
Protection  
*2 to 5 pF  
R2  
PULL-UP  
*250 W  
2-ms  
Delay  
PULL-DOWN  
INPUT  
I
SENSE  
R1  
*0.1 W  
V
SS  
* Typical Values  
1. Patent Number 484116.  
Document Number: 70009  
S-40707—Rev. G, 19-Apr-04  
www.vishay.com  
1

与SI9910DY-T1相关器件

型号 品牌 获取价格 描述 数据表
SI9910DY-T1-E3 VISHAY

获取价格

Adaptive Power MOSFET Driver
SI9912 VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies
SI9912DY VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies
SI9912DY-E3 VISHAY

获取价格

MOSFET Driver, MOS, PDSO8
SI9912DY-T1 VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies
SI9912DY-T1-E3 VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies
SI9913 VISHAY

获取价格

Dual MOSFET Bootstrapped Driver with Break-Before-Make
SI9913_04 VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies
SI9913DB VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies
SI9913DY VISHAY

获取价格

Half-Bridge MOSFET Driver for Switching Power Supplies