PI74SSTV32852
24-Bit to 48-Bit Registered Buffer
ProductFeatures
ProductDescription
PericomSemiconductor’sPI74SSTV32852logiccircuitisproduced
using the Company’s advanced 0.35 micron CMOS technology,
achieving industry leading speed.
All inputs are compatible with the JEDEC standard for SSTL_2,
excepttheLVCMOSreset(RESET)input.AlloutputsareSSTL_2,
ClassIIcompatible.
The device operates from a differential clock (CK and CK). Data
registered at the crossing of CK going HIGH, and CK going LOW.
ThePI74SSTV32852supportslow-powerstandbyoperation.When
RESET is LOW, the differential input receivers are disabled, and
undriven(floating)data,clockandreferencevoltage(VREF)inputs
areallowed.Inaddition,whenRESETisLOW,allregistersarereset,
and all outputs are forced LOW. The LVCMOS RESET input must
always be held at a valid logic HIGH or LOW level.
To ensure defined outputs from the register before a stable clock
has been supplied, RESET must be held in the LOW state during
power up.
• PI74SSTV32852isdesignedforlow-voltageoperation,
V
DD
=V
=2.3Vto2.7V
DDQ
• Supports SSTL_2 Class II specifications on outputs
• AllInputsareSSTL_2Compatible,exceptRESET
whichisLVCMOS.
• Designed for DDR Memory
• Packaging(Pb-freeavailable):
114-BallLFBGA
LogicBlockDiagram
A3
CLK
A4
CLK
A2
R3
Q1A
Q1B
RESET
R
CLK
T2
R4
A5
D1
D
V
REF
IntheDDRDIMMapplication,RESETisspecifiedtobecompletely
asynchronous with respect to CK and CK. Therefore, no timing
relationship can be guaranteed between the two. When entering
RESET, the register will be cleared and the outputs will be driven
LOW quickly, relative to the time to disable the differential input
receivers, thus ensuring no glitches on the output. However, when
comingoutof RESET,theregisterwillbecomeactivequickly,relative
to the time to enable the differential input receivers. When the data
inputs are LOW, and the clock is stable, during the time from the
LOW-to-HIGH transition of RESET until the input receivers
are fully enabled, the design must ensure that the outputs will
remainLOW.
TO 23 OTHER CHANNELS
ProductPinDescription
Pin Name
Description
Reset (Active Low) LVCMOS
Clock Input, Positive Differential Input
Clock Input, Negative Differential Input
Data Input
Data Output
Ground
Core Supply Voltage, 2.5V Nominal
Output Supply Voltage, 2.5V Nominal
Input Reference Voltage, 1.25V Nominal
RESET
CLK
CLK
D
Q
Pericom’s PI74SSTV32852 is characterized for operation from
0°to70°C.
GND
VDD
VDDQ
VREF
TruthTable(1)
Inputs
Outputs
RESET
CLK
X or Floating
CLK
X or Floating
D
Q
L
L
X or Floating
H
Η
↑
↓
H
L
H
L
↑
↓
H
L or H
L or H
X
Qo(2)
Notes:
1. H = High Signal Level; L = Low Signal Level; ↑ = Transition LOW-to-HIGH; ↓ = Transition HIGH-to-LOW
X = Irrelevant or floating
2. Output level before the indicated steady state input conditions were established.
1
PS8615A
06/23/02