Datasheet > MPC9230ACR2

MPC9230ACR2

更新时间： 2024-02-06 22:21:33

品牌	Logo	应用领域
恩智浦 - NXP		时钟外围集成电路晶体
页数	文件大小	规格书
16页	375K
描述
750MHz, OTHER CLOCK GENERATOR, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, MS-026BBA, LQFP-32

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MPC9230ACR2 技术参数

是否Rohs认证：	符合	生命周期：	Transferred
零件包装代码：	QFP	包装说明：	7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, MS-026BBA, LQFP-32
针数：	32	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.22	JESD-30 代码：	S-PQFP-G32
JESD-609代码：	e3	长度：	7 mm
湿度敏感等级：	3	端子数量：	32
最高工作温度：	85 °C	最低工作温度：	-40 °C
最大输出时钟频率：	750 MHz	封装主体材料：	PLASTIC/EPOXY
封装代码：	LQFP	封装等效代码：	QFP32,.35SQ,32
封装形状：	SQUARE	封装形式：	FLATPACK, LOW PROFILE
峰值回流温度（摄氏度）：	220	电源：	3.3 V
主时钟/晶体标称频率：	20 MHz	认证状态：	Not Qualified
座面最大高度：	1.6 mm	子类别：	Clock Generators
最大压摆率：	110 mA	最大供电电压：	3.465 V
最小供电电压：	3.135 V	标称供电电压：	3.3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Matte Tin (Sn)
端子形式：	GULL WING	端子节距：	0.8 mm
端子位置：	QUAD	处于峰值回流温度下的最长时间：	30
宽度：	7 mm	uPs/uCs/外围集成电路类型：	CLOCK GENERATOR, OTHER
Base Number Matches：	1

MPC9230ACR2 数据手册

MPC9230

Rev. 5, 08/2005

Freescale Semiconductor

Technical Data

800 MHz Low Voltage PECL

Clock Synthesizer

MPC9230

The MPC9230 is a 3.3 V compatible, PLL based clock synthesizer targeted for

high performance clock generation in mid-range to high-performance telecom,

networking and computing applications. With output frequencies from 50 MHz to

800 MHz⁽¹⁾and the support of differential PECL output signals the device meets

the needs of the most demanding clock applications.

800 MHz LOW VOLTAGE

CLOCK SYNTHESIZER

Features

•

50 MHz to 800 MHz⁽¹⁾synthesized clock output signal

FN SUFFIX

28-LEAD PLCC PACKAGE

Differential PECL output

CASE 776-02

LVCMOS compatible control inputs

On-chip crystal oscillator for reference frequency generation

Alternative LVCMOS compatible reference clock input

3.3 V power supply

EI SUFFIX

28-LEAD PLCC PACKAGE

Pb-FREE PACKAGE

CASE 776-02

Fully integrated PLL

Minimal frequency overshoot

Serial 3-wire programming interface

Parallel programming interface for power-up

32-lead LQFP and 28-lead PLCC packaging

32-lead and 28-lead Pb-free package available

SiGe Technology

FA SUFFIX

32-LEAD LQFP PACKAGE

CASE 873A-04

AC SUFFIX

32-LEAD LQFP PACKAGE

Pb-FREE PACKAGE

CASE 873A-04

Ambient temperature range -40°C to +85°C

Pin and function compatible to the MC12430

Functional Description

The internal crystal oscillator uses the external quartz crystal as the basis of its frequency reference. The frequency of the

internal crystal oscillator is divided by 16 and then multiplied by the PLL. The VCO within the PLL operates over a range of 800

to 1600 MHz.⁽¹⁾Its output is scaled by a divider that is configured by either the serial or parallel interfaces. The crystal oscillator

frequency f_XTAL, the PLL feedback-divider M and the PLL post-divider N determine the output frequency.

The feedback path of the PLL is internal. The PLL adjusts the VCO output frequency to be 8⋅M times the reference frequency

by adjusting the VCO control voltage. Note that for some values of M (either too high or too low) the PLL will not achieve phase

lock. The PLL will be stable if the VCO frequency is within the specified VCO frequency range (800 to 1600 MHz⁽¹⁾). The M-value

must be programmed by the serial or parallel interface.

The PLL post-divider N is configured through either the serial or the parallel interfaces, and can provide one of four division

ratios (1, 2, 4, or 8). This divider extends performance of the part while providing a 50% duty cycle. The output driver is driven

differentially from the output divider, and is capable of driving a pair of transmission lines terminated 50 Ω to V_CC– 2.0 V. The

positive supply voltage for the internal PLL is separated from the power supply for the core logic and output drivers to minimize

noise induced jitter.

The configuration logic has two sections: serial and parallel. The parallel interface uses the values at the M[8:0] and N[1:0]

inputs to configure the internal counters. It is recommended on system reset to hold the P_LOAD input LOW until power becomes

valid. On the LOW-to-HIGH transition of P_LOAD, the parallel inputs are captured. The parallel interface has priority over the

serial interface. Internal pullup resistors are provided on the M[8:0] and N[1:0] inputs and prevent the LVCMOS compatible control

inputs from floating.

The serial interface centers on a fourteen bit shift register. The shift register shifts once per rising edge of the S_CLOCK input.

The serial input S_DATA must meet setup and hold timing as specified in the AC Characteristics section of this document. The

configuration latches will capture the value of the shift register on the HIGH-to-LOW edge of the S_LOAD input. See the program-

ming section for more information. The TEST output reflects various internal node values, and is controlled by the T[2:0] bits in

the serial data stream. In order to minimize the PLL jitter, it is recommended to avoid active signal on the TEST output.

1. The VCO frequency range of 800–1600 MHz is available at an ambient temperature range of 0 to 70°C. At –40 to +85°C, the VCO frequency

(output frequency) is limited to max. 1500 MHz (750 MHz).

12 3 4 5 6 7...16

中文翻译

下载PDF

与MPC9230ACR2相关器件

型号	品牌	获取价格	描述	数据表
MPC9230EI	IDT	获取价格	Clock Generator, 750MHz, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9230EI	NXP	获取价格	750 MHz, OTHER CLOCK GENERATOR, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9230FA	MOTOROLA	获取价格	800MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32
MPC9230FAR2	MOTOROLA	获取价格	800MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32
MPC9230FNR2	MOTOROLA	获取价格	Clock Generator, 800MHz, CMOS, PQCC28, PLASTIC, LCC-28
MPC9239	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239AC	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239EI	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239EI	NXP	获取价格	900 MHz, OTHER CLOCK GENERATOR, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9239EIR2	NXP	获取价格	900MHz, OTHER CLOCK GENERATOR, PQCC28, LEAD FREE, PLASTIC, LCC-28

与MPC9230ACR2相关文章

SMMBT3904LT1G数据手册：参数分析与替代型号推荐
2024-06-27

1
LL4148手册解读：参数分析、产品特性
2024-06-27

1
BSS138DW手册解读：引脚信息、电气参数分析
2024-06-27

1
共享储能电站：数据驱动与政策引领下的黄金机遇
2024-06-26

13

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9230ACR2

MPC9230ACR2 技术参数

MPC9230ACR2 数据手册

与MPC9230ACR2相关器件

与MPC9230ACR2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9230ACR2

MPC9230ACR2 技术参数

MPC9230ACR2 数据手册

与MPC9230ACR2相关器件

与MPC9230ACR2相关文章

您还可以找

您在本页遇到什么问题？