Datasheet > MPC9230FAR2

MPC9230FAR2

更新时间： 2024-11-04 14:53:55

品牌	Logo	应用领域
摩托罗拉 - MOTOROLA		时钟外围集成电路晶体
页数	文件大小	规格书
9页	132K
描述
800MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MPC9230FAR2 技术参数

生命周期：	Transferred	零件包装代码：	QFP
包装说明：	QFP, QFP32,.35SQ,32	针数：	32
Reach Compliance Code：	unknown	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.22
JESD-30 代码：	S-PQFP-G32	长度：	7 mm
端子数量：	32	最高工作温度：	70 °C
最低工作温度：		最大输出时钟频率：	800 MHz
封装主体材料：	PLASTIC/EPOXY	封装代码：	QFP
封装等效代码：	QFP32,.35SQ,32	封装形状：	SQUARE
封装形式：	FLATPACK	电源：	3.3 V
主时钟/晶体标称频率：	20 MHz	认证状态：	Not Qualified
座面最大高度：	1.6 mm	子类别：	Clock Generators
最大压摆率：	110 mA	最大供电电压：	3.465 V
最小供电电压：	3.135 V	标称供电电压：	3.3 V
表面贴装：	YES	技术：	CMOS
温度等级：	COMMERCIAL	端子形式：	GULL WING
端子节距：	0.8 mm	端子位置：	QUAD
宽度：	7 mm	uPs/uCs/外围集成电路类型：	CLOCK GENERATOR, OTHER
Base Number Matches：	1

MPC9230FAR2 数据手册

ꢀꢁ ꢂ ꢁꢃ ꢁ ꢄꢅ

SEMICONDUCTOR TECHNICAL DATA

Order Number: MPC9230/D

Rev 3, 03/2003

ꢆꢇ ꢇ ꢀꢈ ꢉ ꢄꢊꢋ ꢌꢊꢍꢎ ꢏ ꢐ ꢑ ꢒ ꢓ ꢔꢄ

ꢔꢍ ꢊꢕꢖ ꢗ ꢘ ꢙꢎ ꢚ ꢑ ꢛꢜꢉꢑ ꢝ

ꢀꢒ ꢔꢞ ꢟꢠ ꢇ

The MPC9230 is a 3.3V compatible, PLL based clock synthesizer tar-

geted for high performance clock generation in mid-range to high-perfor-

mance telecom, networking and computing applications. With output fre-

quencies from 50 MHz to 800 MHz and the support of differential PECL

output signals the device meets the needs of the most demanding clock

applications.

800 MHZ LOW VOLTAGE

CLOCK SYNTHESIZER

Features

• 50 MHz to 800 MHz synthesized clock output signal

• Differential PECL output

• LVCMOS compatible control inputs

• On-chip crystal oscillator for reference frequency generation

• Alternative LVCMOS compatible reference clock input

• 3.3V power supply

• Fully integrated PLL

• Minimal frequency overshoot

• Serial 3-wire programming interface

• Parallel programming interface for power-up

• 32 lead LQFP and 28 PLCC packaging

• SiGe Technology

FN SUFFIX

28 LEAD PLCC PACKAGE

CASE 776

• Ambient temperature range 0°C to +70°C

• Pin and function compatible to the MC12430

Functional Description

FA SUFFIX

32 LEAD LQFP PACKAGE

CASE 873A

The internal crystal oscillator uses the external quartz crystal as the

basis of its frequency reference. The frequency of the internal crystal

oscillator is divided by 16 and then multiplied by the PLL. The VCO within

the PLL operates over a range of 800 to 1600 MHz. Its output is scaled by

a divider that is configured by either the serial or parallel interfaces. The

crystal oscillator frequency f_XTAL, the PLL feedback-divider M and the

PLL post-divider N determine the output frequency.

The feedback path of the PLL is internal. The PLL adjusts the VCO output frequency to be 8⋅M times the reference frequency

by adjusting the VCO control voltage. Note that for some values of M (either too high or too low) the PLL will not achieve phase

lock. The PLL will be stable if the VCO frequency is within the specified VCO frequency range (800 to 1600 MHz). The M-value

must be programmed by the serial or parallel interface.

The PLL post-divider N is configured through either the serial or the parallel interfaces, and can provide one of four division

ratios (1, 2, 4, or 8). This divider extends performance of the part while providing a 50% duty cycle. The output driver is driven

differentially from the output divider, and is capable of driving a pair of transmission lines terminated 50Ω to V_CC– 2.0V. The

positive supply voltage for the internal PLL is separated from the power supply for the core logic and output drivers to minimize

noise induced jitter.

The configuration logic has two sections: serial and parallel. The parallel interface uses the values at the M[8:0] and N[1:0]

inputs to configure the internal counters. It is recommended on system reset to hold the P_LOAD input LOW until power becomes

valid. On the LOW–to–HIGH transition of P_LOAD, the parallel inputs are captured. The parallel interface has priority over the

serial interface. Internal pullup resistors are provided on the M[8:0] and N[1:0] inputs prevent the LVCMOS compatible control

inputs from floating.

The serial interface centers on a fourteen bit shift register. The shift register shifts once per rising edge of the S_CLOCK input.

The serial input S_DATA must meet setup and hold timing as specified in the AC Characteristics section of this document. The

configuration latches will capture the value of the shift register on the HIGH–to–LOW edge of the S_LOAD input. See the

programming section for more information. The TEST output reflects various internal node values, and is controlled by the T[2:0]

bits in the serial data stream. In order to minimize the PLL jitter, it is recommended to avoid active signal on the TEST output.

408

MOTOROLA ADVANCED CLOCK DRIVERS DEVICE DATA

12 3 4 5 6 7...9

中文翻译

下载PDF

与MPC9230FAR2相关器件

型号	品牌	获取价格	描述	数据表
MPC9230FNR2	MOTOROLA	获取价格	Clock Generator, 800MHz, CMOS, PQCC28, PLASTIC, LCC-28
MPC9239	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239AC	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239EI	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239EI	NXP	获取价格	900 MHz, OTHER CLOCK GENERATOR, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9239EIR2	NXP	获取价格	900MHz, OTHER CLOCK GENERATOR, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9239FA	MOTOROLA	获取价格	Clock Generator, 900MHz, CMOS, PQFP32, LQFP-32
MPC9239FA	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239FA	NXP	获取价格	900MHz, OTHER CLOCK GENERATOR, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, 0.80 MM PITCH, MS-026BBA,
MPC9239FN	NXP	获取价格	IC,MISCELLANEOUS CLOCK GENERATOR,LDCC,28PIN,PLASTIC

与MPC9230FAR2相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

13
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

7
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

33
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

30

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9230FAR2

MPC9230FAR2 技术参数

MPC9230FAR2 数据手册

与MPC9230FAR2相关器件

与MPC9230FAR2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9230FAR2

MPC9230FAR2 技术参数

MPC9230FAR2 数据手册

与MPC9230FAR2相关器件

与MPC9230FAR2相关文章

您还可以找

您在本页遇到什么问题？