5秒后页面跳转
MPC92429FAR2 PDF预览

MPC92429FAR2

更新时间: 2024-02-21 01:27:11
品牌 Logo 应用领域
恩智浦 - NXP 时钟外围集成电路晶体
页数 文件大小 规格书
12页 292K
描述
400MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32

MPC92429FAR2 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Obsolete零件包装代码:QFP
包装说明:LQFP-32针数:32
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.27
JESD-30 代码:S-PQFP-G32JESD-609代码:e0
长度:7 mm湿度敏感等级:3
端子数量:32最高工作温度:70 °C
最低工作温度:最大输出时钟频率:400 MHz
封装主体材料:PLASTIC/EPOXY封装代码:LQFP
封装等效代码:QFP32,.35SQ,32封装形状:SQUARE
封装形式:FLATPACK, LOW PROFILE峰值回流温度(摄氏度):240
电源:3.3 V主时钟/晶体标称频率:20 MHz
认证状态:Not Qualified座面最大高度:1.6 mm
子类别:Clock Generators最大压摆率:100 mA
最大供电电压:3.465 V最小供电电压:3.135 V
标称供电电压:3.3 V表面贴装:YES
技术:CMOS温度等级:COMMERCIAL
端子面层:Tin/Lead (Sn85Pb15)端子形式:GULL WING
端子节距:0.8 mm端子位置:QUAD
处于峰值回流温度下的最长时间:20宽度:7 mm
uPs/uCs/外围集成电路类型:CLOCK GENERATOR, OTHER

MPC92429FAR2 数据手册

 浏览型号MPC92429FAR2的Datasheet PDF文件第2页浏览型号MPC92429FAR2的Datasheet PDF文件第3页浏览型号MPC92429FAR2的Datasheet PDF文件第4页浏览型号MPC92429FAR2的Datasheet PDF文件第5页浏览型号MPC92429FAR2的Datasheet PDF文件第6页浏览型号MPC92429FAR2的Datasheet PDF文件第7页 
MPC92429  
Rev 3, 05/2005  
Freescale Semiconductor  
Technical Data  
400 MHz Low Voltage PECL  
Clock Synthesizer  
MPC92429  
The MPC92429 is a 3.3 V compatible, PLL based clock synthesizer targeted  
for high performance clock generation in mid-range to high-performance  
telecom, networking and computing applications. With output frequencies from  
25 MHz to 400 MHz and the support of differential PECL output signals the  
device meets the needs of the most demanding clock applications.  
400 MHZ LOW VOLTAGE  
CLOCK SYNTHESIZER  
Features  
25 MHz to 400 MHz synthesized clock output signal  
Differential PECL output  
LVCMOS compatible control inputs  
On-chip crystal oscillator for reference frequency generation  
3.3 V power supply  
FN SUFFIX  
28-LEAD PLCC PACKAGE  
CASE 776-02  
Fully integrated PLL  
Minimal frequency overshoot  
EI SUFFIX  
28-LEAD PLCC PACKAGE  
Pb-FREE PACKAGE  
CASE 776-02  
Serial 3-wire programming interface  
Parallel programming interface for power-up  
32-lead LQFP and 28-PLCC packaging  
32-lead and 28-lead Pb-free package available  
SiGe Technology  
FA SUFFIX  
32-LEAD LQFP PACKAGE  
CASE 873A-03  
Ambient temperature range 0°C to +70°C  
Pin and function compatible to the MC12429 and MPC9229  
AC SUFFIX  
32-LEAD LQFP PACKAGE  
Pb-FREE PACKAGE  
CASE 873A-03  
Functional Description  
The internal crystal oscillator uses the external quartz crystal as the basis of  
its frequency reference. The frequency of the internal crystal oscillator is divided  
by 16 and then multiplied by the PLL. The VCO within the PLL operates over a range of 800 to 1600 MHz. Its output is scaled by  
a divider that is configured by either the serial or parallel interfaces. The crystal oscillator frequency fXTAL, the PLL feedback-  
divider M and the PLL post-divider N determine the output frequency.  
The feedback path of the PLL is internal. The PLL adjusts the VCO output frequency to be 4 x M times the reference frequency  
by adjusting the VCO control voltage. Note that for some values of M (either too high or too low) the PLL will not achieve phase  
lock. The PLL will be stable if the VCO frequency is within the specified VCO frequency range (800 to 1600 MHz). The M-value  
must be programmed by the serial or parallel interface.  
The PLL post-divider N is configured through either the serial or the parallel interfaces, and can provide one of four division  
ratios (1, 2, 4, or 8). This divider extends performance of the part while providing a 50% duty cycle. The output driver is driven  
differentially from the output divider, and is capable of driving a pair of transmission lines terminated 50 to VCC – 2.0 V. The  
positive supply voltage for the internal PLL is separated from the power supply for the core logic and output drivers to minimize  
noise induced jitter.  
The configuration logic has two sections: serial and parallel. The parallel interface uses the values at the M[8:0] and N[1:0]  
inputs to configure the internal counters. It is recommended on system reset to hold the P_LOAD input LOW until power becomes  
valid. On the LOW-to-HIGH transition of P_LOAD, the parallel inputs are captured. The parallel interface has priority over the  
serial interface. Internal pullup resistors are provided on the M[8:0] and N[1:0] inputs prevent the LVCMOS compatible control  
inputs from floating.  
The serial interface centers on a fourteen bit shift register. The shift register shifts once per rising edge of the S_CLOCK input.  
The serial input S_DATA must meet setup and hold timing as specified in the AC Characteristics section of this document. The  
configuration latches will capture the value of the shift register on the HIGH-to-LOW edge of the S_LOAD input. See PROGRAM-  
MING INTERFACE for more information. The TEST output reflects various internal node values, and is controlled by the T[2:0]  
bits in the serial data stream. In order to minimize the PLL jitter, it is recommended to avoid active signal on the TEST output.  
© Freescale Semiconductor, Inc., 2005. All rights reserved.  

与MPC92429FAR2相关器件

型号 品牌 获取价格 描述 数据表
MPC92429FN MOTOROLA

获取价格

400 MHz Low Voltage PECL Clock Synthesizer
MPC92432 MOTOROLA

获取价格

1360 MHz Dual Output LVPECL Clock Synthesizer
MPC92432 IDT

获取价格

1360 MHz Dual Output LVPECL Clock Synthesizer Fully integrated PLL
MPC92432AER2 NXP

获取价格

1360MHz, OTHER CLOCK GENERATOR, PQFP48, LEAD FREE, LQFP-48
MPC92432AER2 IDT

获取价格

Clock Generator, 1360MHz, PQFP48, LEAD FREE, LQFP-48
MPC92432FA MOTOROLA

获取价格

1360 MHz Dual Output LVPECL Clock Synthesizer
MPC92432FA NXP

获取价格

1360MHz, OTHER CLOCK GENERATOR, PQFP48, LQFP-48
MPC92432FAR2 NXP

获取价格

1360MHz, OTHER CLOCK GENERATOR, PQFP48, LQFP-48
MPC92433 FREESCALE

获取价格

1428 MHz Dual Output LVPECL Clock Synthesizer
MPC92433AER2 NXP

获取价格

1428MHz, OTHER CLOCK GENERATOR, PQFP48, ROHS COMPLIANT, LQFP-48