MC100LVEL39
3.3VꢀECL ÷2/4, ÷4/6 Clock
Generation Chip
Description
The MC100LVEL39 is a low skew ÷2/4, ÷4/6 clock generation chip
designed explicitly for low skew clock generation applications. The
internal dividers are synchronous to each other, therefore, the common
output edges are all precisely aligned. The device can be driven by
either a differential or single-ended input signal. In addition, by using
http://onsemi.com
the V output, a sinusoidal source can be AC coupled into the device.
BB
The common enable (EN) is synchronous so that the internal dividers
will only be enabled/disabled when the internal clock is already in the
LOW state. This avoids any chance of generating a runt clock pulse on
the internal clock when the device is enabled/disabled as can happen with
an asynchronous control. An internal runt pulse could lead to losing
synchronization between the internal divider stages. The internal enable
flip−flop is clocked on the falling edge of the input clock, therefore, all
associated specification limits are referenced to the negative edge of the
clock input.
SO−20 WB
DW SUFFIX
CASE 751D
MARKING DIAGRAM*
20
Upon startup, the internal flip-flops will attain a random state;
therefore, for systems which utilize multiple LVEL39s, the Master Reset
(MR) input must be asserted to ensure synchronization. For systems
which only use one LVEL39, the MR pin need not be exercised as the
internal divider design ensures synchronization between the ÷2/4 and the
÷4/6 outputs of a single device.
100LVEL39
AWLYYWWG
1
A
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
The V pin, an internally generated voltage supply, is available to this
BB
WL
YY
WW
G
device only. For single-ended input conditions, the unused differential
input is connected to V as a switching reference voltage. V may also
BB
BB
rebias AC coupled inputs. When used, decouple V and V via a
BB
CC
0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When
*For additional marking information, refer to
Application Note AND8002/D.
not used, V should be left open.
BB
Features
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
• 50 ps Maximum Output-to-Output Skew
• Synchronous Enable/Disable
• Master Reset for Synchronization
• ESD Protection: Human Body Model; >2 kV
• The 100 Series Contains Temperature Compensation
• PECL Mode Operating Range:
• Moisture Sensitivity Level 1
For Additional Information, see Application Note
AND8003/D
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 419 devices
• Pb−Free Packages are Available*
V
= 3.0 V to 3.8 V with V = 0 V
EE
CC
• NECL Mode Operating Range:
= 0 V with V = −3.0 V to −3.8 V
V
CC
EE
• Internal Input Pulldown Resistors
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC
Latchup Test
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
November, 2006 − Rev. 9
MC100LVEL39/D