5秒后页面跳转
MBD-153-KL PDF预览

MBD-153-KL

更新时间: 2024-10-18 03:50:11
品牌 Logo 应用领域
其他 - ETC /
页数 文件大小 规格书
5页 134K
描述
Low TCR, 1mW Dual Rejustor⑩ Micro-Resistor

MBD-153-KL 数据手册

 浏览型号MBD-153-KL的Datasheet PDF文件第2页浏览型号MBD-153-KL的Datasheet PDF文件第3页浏览型号MBD-153-KL的Datasheet PDF文件第4页浏览型号MBD-153-KL的Datasheet PDF文件第5页 
Low TCR, 1mW  
Dual Rejustor™ Micro-Resistor  
MBD-472-AL  
The Rejustor is a precision, electrically-adjustable  
resistor from Microbridge. The Rejustor can be  
adjusted to a precision of 0.1%, or better. The  
Rejustor can be re-adjusted many times bi-  
directionally within the active range using standard  
hardware and LabVIEW-based Rejust-it calibration  
software.  
ELECTRICALLY ADJUSTABLE 4.7K1:1  
RESISTOR PAIR  
R2  
R1  
R1ADJ  
R2ADJ  
HGND  
e
e
Low-power Rejustors are suitable for applications  
where the total power dissipation (in the pair) does  
not exceed 1mW.  
R1  
R2  
Figure 1: Functional Block Diagram  
As a passive device, there is no warm-up period or  
boot-up time. Each Rejustor is independently  
adjustable to any value in the 30% adjustment range  
while still offering excellent TCR. They are non-  
volatile, maintaining their adjusted value indefinitely.  
FEATURES  
° Electrically adjustable 4.7K1:1 dual resistor  
° Passive, non-volatile variable resistor  
° Adjustment range: 30% down from as-  
manufactured resistance  
Each Low-TCR Rejustor maintains 0ppm/K TCR  
across the adjustment range within ±100ppm/K.  
Relative TCR between both Rejustors is less than  
±50ppm/K.  
° Bi-directional adjustment within active range  
° Long term stability 0.5%, see Table 5  
° Flexibility: Potential for multiple adjustments  
° Stable Temperature Coefficient as resistance  
is adjusted – TCR: 0±100ppm/K  
PARAMETER  
SPECIFICATION  
4.7KΩ  
° Power Rating up to 1.0mW at 70oC  
° Suitable for operation from -40 to +125oC,  
refer to Table 2  
Resistance (as-manufactured)  
Minimum adjustable resistance  
Adjustment Precision  
TCR (per Rejustor)  
Power dissipation (per Rejustor)  
3.3KΩ  
0.1% or 0.01%1  
0±100ppm/K  
0.5mW  
° Passive device, requires no power to operate  
or maintain adjustment  
° Easy to adjust with Rejust-it software and  
external DAC/ADC hardware  
BENEFITS  
° Precision electrical in-circuit adjustment  
° Externally adjust or calibrate parameters on  
circuits or sensors at final assembly  
° Adjustment process isolated from circuit  
allows true in-circuit calibration  
° Single chip solution to calibrate voltages,  
currents, offsets, gains, etc.  
° No mechanical moving parts – suitable for  
vibration sensitive applications  
° Typical adjust times: ~ 1sec1.  
APPLICATIONS  
° Anywhere precision adjustment is required  
° Gain and offset adjustment  
° Reference voltage or current adjustment  
° Precision Voltage Regulator adjustment  
° Filter tuning  
° RF Amplifier biasing  
° Opto-electronics  
° Improved reliability; dependability; dust and  
moisture resistance over mechanical parts  
° Dynamic adjustment provides cost and labor  
savings  
° Frequency Control devices  
° Mechanical or digital potentiometer  
replacement  
°
Suitable for high-frequency applications  
° Flexibility reduces rework cost  
1 Adjustment precision is limited by temperature control, accuracy  
of measurement and adjustment equipment and may increase  
adjustment time  
Information furnished by Microbridge Technologies is believed to be accurate and reliable. However, no responsibility is assumed by Microbridge Technologies for its use, nor for any  
infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any  
patent or patent rights of Microbridge Technologies. Trademarks and registered trademarks are the property of their respective companies.  
© 2007 Microbridge Technologies, Inc. 1980 Sherbrooke St. West, Montreal, Quebec, H3H 1E8 Tel: 514-938-8089 Fax: 514-938-9089  
Rev. 1.2  
July 19, 2007  

与MBD-153-KL相关器件

型号 品牌 获取价格 描述 数据表
MBD20 AUK

获取价格

Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Termina
MBD201 ONSEMI

获取价格

DIODE SILICON, UHF BAND, MIXER DIODE, TO-226AC, CASE 182-02, TO-92, 2 PIN, Microwave Mixer
MBD2057 TE

获取价格

Zero Bias Operation
MBD2057-C18 TE

获取价格

Zero Bias Operation
MBD-20-63HP MINI

获取价格

Bi-Directional Coupler
MBD-20-63HP+ MINI

获取价格

Bi-Directional Coupler
MBD30 AUK

获取价格

Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Termina
MBD301 MOTOROLA

获取价格

30 VOLTS SILICON HOT.CARRIER DETECTOR AND SWITCHING DIODES
MBD301 ONSEMI

获取价格

SILICON HOT-CARRIER DETECTOR AND SWITCHING DIODES
MBD301 LRC

获取价格

Silicon Hot-Carrier Diodes Schottky Barrier Diodes