LENSES
10mm THREADED LENS for PCB MOUNTED LEDs
SPECIFICATIONS
MATERIAL
Lens
-
-
-
-
Polycarbonate
Lock washer
Retaining ring
Seal
FH Steel, Nickel plate
Thermoplastic U.L. 94 V0 Rated
EPDM
DESIGN
10mm low profile lens with fresnel rings.
MOUNTING Mounts through front of panel. Retaining ring secures the assembly to panel.
HMC 461 & HMS 462 mounts through a 9/16˝ (14.3mm) hole on 3/4˝ centers.
Panel thickness 1/32˝ to 3/16˝.
TEST DATA
Assembly tested for: Temperature cycle -40°C to +105°C, Water, Ice,
Shock/vibration up to 6g at 2000Hz, Solar & UV. Tests conducted by
Consolidated Laboratories.
U.S. & Foreign Patents Issued and Pending
VERSATILITY
CLIPLITE® lenses provide a method of viewing PCB mounted LEDs on a display panel. Designed
to accommodate either Hi-flux or 10mm LEDs. Permits LED viewing angles of up to 180 degrees.
Lenses are available in six colors.
EASY THREE STEP PANEL ASSEMBLY
BRIGHTNESS
CLIPLITE® lenses enhance the direct viewing of PCB mounted LEDs. Mono, multi-color, infrared,
and photo detection devices can be displayed in this manner. LED brightness levels can range from
20 to 40,000mcd.
APPLICATION
CLIPLITE® lenses permit the panel display of PCB mounted LED without its physical attachment to
front panel. Properly installed, the assembly exceeds NEMA 4 for water, ice and dust conditions.
Additionally tested for U.V., solar, temperature cycling, shock and vibration. Also provides circuit
protection from ESD.
INSTALLATION
Slide lens through 9/16˝ hole. Slip the lock washer onto lens barrel. While holding lens, twist
retaining ring one revolution until secure.
CLIPLITE® 10mm lenses are easily installed. Simply slip lens through a 9/16˝ panel opening, slide
lock washer onto lens barrel and twist on retaining ring. PCB mounted LED can then slide in and out
of the lens without physical attachment to display panel. If overtightened, retaining ring is designed
to slip back into previous thread. Secure by retightening ring.
ORDERING CODES
LENS ASSEMBLY WITH PCB MOUNTED LEDs
HMC 461 RTP
MODEL
COLOR
HMC 461 Standard Threaded 10mm Fresnel Lens
HMS 462 Water Tight Threaded 10mm Fresnel Lens
RTP Red Transparent
ATP Amber Transparent
GTP Green Transparent
BTP Blue Transparent
YTP Yellow Transparent
CTP Clear Transparent
HMC 461 ASSEMBLY CONTAINS
Lens
Lock washer
Retaining ring
PCB mounted 10mm LED with panel
lens assembly.
PCB mounted Hi-Flux LED with panel
lens assembly.
HMS 462 ASSEMBLY CONTAINS
Lens w/Seal (exceeds NEMA 4)
Lock washer
Retaining ring
OUTLINE DRAWING
RECOMMENDED LEDs
HMS 462 (Assembly)
HMC 461 (Assembly)
LOCK WASHER
RETAINING RING
WATER TIGHT SEAL
w/Lockwasher & Retainer
STANDARD LENS
w/Lockwasher & Retainer
SEE PAGE 31
16
www.VCCLITE.com
vccsales@vcclite.com
1.800.522.5546