Datasheet
LDO Regulators with Watchdog Timer and Voltage Detector
550 mA Output LDO Regulator
with WDT and Voltage Detector
BD4271xxx-C Series
General Description
Key Specifications
BD4271xxx-C Series are automotive voltage regulators
with watchdog timer and offers the output current of 550
mA while limiting the quiescent current low. A logical
“HIGH” at the CTL pin enables the LDO regulator and
“LOW” disables the LDO regulator and keeps current
consumption low.
A reset signal is generated for an output voltage VO of
Typ 4.65 V.
The reset delay time and watchdog time (WDT) can be
programmed by the external capacitor.
◼ AEC-Q100 qualified (Note 1)
◼ Functional Safety Supportive Automotive Products
◼ Qualified for Automotive Applications
◼ Wide Temperature Range (Tj):
◼ Wide Operating Input Range:
◼ Low Quiescent Current:
◼ Output Load Current:
-40 °C to +150 °C
-0.3 V to +45 V
75 µA (Typ)
550 mA
◼ Output Voltage:
◼ Reset Detection Voltage Accuracy:
5.0 V (Typ) ± 2 %
4.53 V to 4.77 V
4.65 V (Typ)
◼ Enable input
◼ Over Current Protection (OCP)
◼ Thermal Shutdown (TSD)
(Note1: Grade 1)
Features
◼ Low ESR ceramic capacitors applicable for output
◼ Low drop voltage: PDMOS output transistor
◼ Power on and under-voltage reset
◼ Programmable reset delay and watchdog time by
Packages
W (Typ) x D (Typ) x H (Max)
9.395 mm x 10.540 mm x 2.005 mm
10.00 mm x 14.95 mm x 4.50 mm
4.9 mm x 6.0 mm x 1.0 mm
◼ HFP: HRP7
◼ FP2: TO263-7
◼ EFJ: HTSOP-J8
external capacitor
Applications
◼ Onboard Vehicle Device
(Engine ECU, Body-control, Car Stereos, Satellite
Navigation System, etc.)
HRP7
TO263-7
HTSOP-J8
Typical Application Circuit
CIN ≥ 0.1 µF, CCT = 0.001 µF to 10 µF, CO ≥ 6 µF
CTL
GND
CLK
VCC
RO
CT
VO
CIN
CCT CO
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays.
www.rohm.com
TSZ02201-0G9G0AN00610-1-2
30.Mar.2023 Rev.004
© 2016 ROHM Co., Ltd. All rights reserved.
1/31
TSZ22111・14・001