是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Transferred | 包装说明: | TSSOP, TSSOP16,.25 |
Reach Compliance Code: | unknown | HTS代码: | 8542.39.00.01 |
风险等级: | 5.07 | 系列: | HC/UH |
JESD-30 代码: | R-PDSO-G16 | JESD-609代码: | e4 |
长度: | 5 mm | 负载电容(CL): | 50 pF |
逻辑集成电路类型: | D FLIP-FLOP | 最大频率@ Nom-Sup: | 24000000 Hz |
最大I(ol): | 0.004 A | 湿度敏感等级: | 1 |
位数: | 6 | 功能数量: | 1 |
端子数量: | 16 | 最高工作温度: | 125 °C |
最低工作温度: | -40 °C | 输出极性: | TRUE |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | TSSOP |
封装等效代码: | TSSOP16,.25 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | 峰值回流温度(摄氏度): | 260 |
电源: | 2/6 V | 传播延迟(tpd): | 50 ns |
认证状态: | Not Qualified | 座面最大高度: | 1.1 mm |
子类别: | FF/Latches | 最大供电电压 (Vsup): | 6 V |
最小供电电压 (Vsup): | 2 V | 标称供电电压 (Vsup): | 5 V |
表面贴装: | YES | 技术: | CMOS |
温度等级: | AUTOMOTIVE | 端子面层: | NICKEL PALLADIUM GOLD |
端子形式: | GULL WING | 端子节距: | 0.65 mm |
端子位置: | DUAL | 处于峰值回流温度下的最长时间: | 30 |
触发器类型: | POSITIVE EDGE | 宽度: | 4.4 mm |
最小 fmax: | 20 MHz | Base Number Matches: | 1 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
74HC174PW-Q100 | NEXPERIA |
获取价格 |
Hex D-type flip-flop with reset; positive-edge trigger | |
74HC174-Q100 | NEXPERIA |
获取价格 |
Hex D-type flip-flop with reset; positive-edge trigger | |
74HC175 | NXP |
获取价格 |
Quad D-type flip-flop with reset; positive-edge trigger | |
74HC175D | NXP |
获取价格 |
Quad D-type flip-flop with reset; positive-edge trigger | |
74HC175D | NEXPERIA |
获取价格 |
Quad D-type flip-flop with reset; positive-edge triggerProduction | |
74HC175D | TOSHIBA |
获取价格 |
Quad D-Type Flip-Flop, SOIC16 | |
74HC175D,652 | NXP |
获取价格 |
74HC(T)175 - Quad D-type flip-flop with reset; positive-edge trigger SOP 16-Pin | |
74HC175D,653 | NXP |
获取价格 |
74HC(T)175 - Quad D-type flip-flop with reset; positive-edge trigger SOP 16-Pin | |
74HC175D/T3 | NXP |
获取价格 |
IC HC/UH SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO16, 3.90 M | |
74HC175DB | NXP |
获取价格 |
Quad D-type flip-flop with reset; positive-edge trigger |