5秒后页面跳转
UPD72012CU-004 PDF预览

UPD72012CU-004

更新时间: 2024-09-13 15:56:11
品牌 Logo 应用领域
瑞萨 - RENESAS 光电二极管
页数 文件大小 规格书
40页 343K
描述
UNIVERSAL SERIAL BUS CONTROLLER, PDIP42, 0.600 INCH, SHRINK, PLASTIC, DIP-42

UPD72012CU-004 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Obsolete零件包装代码:DIP
包装说明:SDIP,针数:42
Reach Compliance Code:compliantECCN代码:3A001.A.3
HTS代码:8542.31.00.01风险等级:5.47
地址总线宽度:最大时钟频率:48 MHz
最大数据传输速率:1.5 MBps外部数据总线宽度:
JESD-30 代码:R-PDIP-T42JESD-609代码:e0
端子数量:42最高工作温度:70 °C
最低工作温度:封装主体材料:PLASTIC/EPOXY
封装代码:SDIP封装形状:RECTANGULAR
封装形式:IN-LINE, SHRINK PITCH峰值回流温度(摄氏度):NOT SPECIFIED
认证状态:Not Qualified座面最大高度:5.08 mm
最大供电电压:3.6 V最小供电电压:3 V
标称供电电压:3.3 V表面贴装:NO
技术:CMOS温度等级:COMMERCIAL
端子面层:TIN LEAD端子形式:THROUGH-HOLE
端子节距:1.778 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:15.24 mm
uPs/uCs/外围集成电路类型:BUS CONTROLLER, UNIVERSAL SERIAL BUSBase Number Matches:1

UPD72012CU-004 数据手册

 浏览型号UPD72012CU-004的Datasheet PDF文件第2页浏览型号UPD72012CU-004的Datasheet PDF文件第3页浏览型号UPD72012CU-004的Datasheet PDF文件第4页浏览型号UPD72012CU-004的Datasheet PDF文件第5页浏览型号UPD72012CU-004的Datasheet PDF文件第6页浏览型号UPD72012CU-004的Datasheet PDF文件第7页 
PRELIMINARY DATA SHEET  
MOS INTEGRATED CIRCUIT  
µ
PD72012  
HUB CONTROLLER FOR UNIVERSAL SERIAL BUS  
The µPD72012 is a dedicated LSI for a HUB connected to a universal serial bus (USB) system.  
It is an upgrade of NEC’s µPD72011. It conforms to Ver. 1.1 of the latest USB specifications.  
By putting descriptors in ROMization, information such as a user’s vendor ID can be implemented in the chip.  
FEATURES  
{ Conforms to Chapter 11 (HUB Specifications) of USB Specification 1.1 which is latest specifications.  
{ Descriptors in ROMization  
The user can customize the vendor ID and product ID.  
{ Supports 5 kinds of string descriptors (for User ROM code product only)  
{ On-chip sequencer  
There is an on-chip descriptor and request response sequencer. External initial setup and control is not needed  
and HUB functions can be realized using only the µPD72012.  
{ Downstream ports  
Four or five ports can be selected using a pin function.  
{ Power modes  
Bus power or self-power can be selected using a pin function (an external power control circuit is required).  
{ Corresponds to standard descriptor products  
Two kinds of standard ROM code products are provided. Standard and HUB class descriptors are on-chip in  
the µPD72012.  
ROM code: 003 (individual overcurrent monitoring type Generic HUB)  
ROM code: 004 (collective overcurrent monitoring type Generic HUB)  
{ Supports two kinds of clock input  
48-MHz oscillator input or a 4-MHz crystal resonator can be supported  
{ Power control  
Port power control and overcurrent detection functions are on-chip. Individual port control or collective control  
can be selected for these.  
ORDERING INFORMATION  
Part No.  
Package  
µPD72012CU-XXX  
42-pin plastic shrink DIP (600 mil)  
µPD72012GB-XXX-3B4  
44-pin plastic QFP (10 × 10 mm)  
The information in this document is subject to change without notice. Before using this document, please  
confirm that this is the latest version.  
Not all devices/types available in every country. Please check with local NEC representative for  
availability and additional information.  
Document No. S13918EJ2V0DSJ1 (2nd edition)  
Date Published September 2000 N CP(K)  
1999  
©

与UPD72012CU-004相关器件

型号 品牌 获取价格 描述 数据表
UPD72012CU-XXX NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-003 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-003-3B4 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-004 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-004-3B4 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-004-3B4 RENESAS

获取价格

UNIVERSAL SERIAL BUS CONTROLLER, PQFP44, 10 X 10 MM, PLASTIC, QFP-44
UPD72012GB-XXX NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-XXX-3B4 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD720130 NEC

获取价格

USB2.0 to IDE Bridge