5秒后页面跳转
UPD72012CU-XXX PDF预览

UPD72012CU-XXX

更新时间: 2024-11-19 22:11:35
品牌 Logo 应用领域
日电电子 - NEC 总线控制器微控制器和处理器外围集成电路光电二极管数据传输时钟
页数 文件大小 规格书
36页 411K
描述
HUB CONTROLLER FOR UNIVERSAL SERIAL BUS

UPD72012CU-XXX 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:DIP包装说明:0.600 INCH, PLASTIC, SDIP-42
针数:42Reach Compliance Code:compliant
ECCN代码:3A001.A.3HTS代码:8542.31.00.01
风险等级:5.76地址总线宽度:
最大时钟频率:48 MHz最大数据传输速率:1.5 MBps
外部数据总线宽度:JESD-30 代码:R-PDIP-T42
JESD-609代码:e0端子数量:42
最高工作温度:70 °C最低工作温度:
封装主体材料:PLASTIC/EPOXY封装代码:SDIP
封装形状:RECTANGULAR封装形式:IN-LINE, SHRINK PITCH
峰值回流温度(摄氏度):NOT SPECIFIED认证状态:Not Qualified
座面最大高度:5.08 mm最大供电电压:3.6 V
最小供电电压:3 V标称供电电压:3.3 V
表面贴装:NO技术:MOS
温度等级:COMMERCIAL端子面层:TIN LEAD
端子形式:THROUGH-HOLE端子节距:1.778 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:15.24 mmuPs/uCs/外围集成电路类型:BUS CONTROLLER, UNIVERSAL SERIAL BUS
Base Number Matches:1

UPD72012CU-XXX 数据手册

 浏览型号UPD72012CU-XXX的Datasheet PDF文件第2页浏览型号UPD72012CU-XXX的Datasheet PDF文件第3页浏览型号UPD72012CU-XXX的Datasheet PDF文件第4页浏览型号UPD72012CU-XXX的Datasheet PDF文件第5页浏览型号UPD72012CU-XXX的Datasheet PDF文件第6页浏览型号UPD72012CU-XXX的Datasheet PDF文件第7页 
DATA SHEET  
MOS INTEGRATED CIRCUIT  
µPD72012  
HUB CONTROLLER FOR UNIVERSAL SERIAL BUS  
The µPD72012 is a dedicated LSI for a HUB connected to a universal serial bus (USB) system.  
It is an upgrade of NEC’s µPD72011. It complies with USB specification revision 1.1.  
By putting descriptors into ROM, information such as a user’s vendor ID can be implemented in the chip.  
FEATURES  
{ Compliant with Chapter 11 (HUB Specifications) of USB Specification 1.1.  
{ Descriptors into ROM  
The user can customize the vendor ID and product ID by using Mask ROM option.  
{ Supports 5 kinds of string descriptors (for Mask ROM code product only)  
{ On-chip sequencer  
There is an on-chip descriptor and request response sequencer. External initial setup and control is not needed  
and HUB functions can be realized using only the µPD72012.  
{ Downstream ports  
Four or five ports can be selected using a pin function.  
{ Power modes  
Bus power or self-power can be selected using a pin function (an external power control circuit is required).  
{ Corresponds to standard descriptor products  
Two kinds of standard ROM code products are provided. Standard and HUB class descriptors are on-chip in  
the µPD72012.  
ROM code: 003 (individual overcurrent monitoring type Generic HUB)  
ROM code: 004 (collective overcurrent monitoring type Generic HUB)  
{ Supports two kinds of clock input  
48 MHz oscillator input or a 4 MHz crystal resonator can be supported  
{ Power control  
Port power control and overcurrent detection functions are on-chip. Individual port control or collective control  
can be selected for these.  
ORDERING INFORMATION  
Part No.  
Package  
µPD72012CU-XXX  
µPD72012GB-XXX-3B4  
42-pin plastic SDIP (15.24 mm (600))  
44-pin plastic QFP (10 × 10)  
The information in this document is subject to change without notice. Before using this document, please  
confirm that this is the latest version.  
Not all devices/types available in every country. Please check with local NEC representative for  
availability and additional information.  
Document No. S13918EJ3V0DS00 (3rd edition)  
Date Published April 2001 NS CP(K)  
Printed in Japan  
The mark shows major revised points.  
1999  

与UPD72012CU-XXX相关器件

型号 品牌 获取价格 描述 数据表
UPD72012GB NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-003 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-003-3B4 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-004 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-004-3B4 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-004-3B4 RENESAS

获取价格

UNIVERSAL SERIAL BUS CONTROLLER, PQFP44, 10 X 10 MM, PLASTIC, QFP-44
UPD72012GB-XXX NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD72012GB-XXX-3B4 NEC

获取价格

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS
UPD720130 NEC

获取价格

USB2.0 to IDE Bridge
UPD720130GC-9EU RENESAS

获取价格

UNIVERSAL SERIAL BUS CONTROLLER, PQFP100, 14 X 14 MM, PLASTIC, TQFP-100