SY10E241
SY100E241
Micrel, Inc.
8-BIT SCANNABLE
REGISTER
SY10E241
SY100E241
FEATURES
DESCRIPTION
■ 1000ps max. CLK to output
The SY10/100E241 are 8-bit shiftable registers designed
for use in new, high-performance ECL systems. Unlike the
E141, the E241 features internal data feedback organized
such that the SHIFT control overrides the HOLD, /LOAD
control. Thus, the normal operations of HOLD and LOAD
can be toggled with a single control line without the need for
external gating. This configuration also enables switching
to scan mode with the single SHIFT control line.
■ Extended 100E VEE range of –4.2V to –5.5V
■ SHIFT overrides HOLD, /LOAD control
■ Asynchronous Master Reset
■ Pin-compatible with E141
■ Fully compatible with industry standard 10KH,
100K ECL levels
The eight inputs D0–D7 accept parallel input data, while
S-IN accepts serial input data when in shift mode. Data is
accepted a set-up time before the rising edge of CLK.
Shifting is also accomplished on the rising clock edge. A
HIGH on the Master Reset pin (MR) asychronously resets
all the registers to zero.
■ Internal 75KΩ input pulldown resistors
■ Fully compatible with Motorola MC10E/100E241
■ Available in 28-pin PLCC package
PIN NAMES
BLOCK DIAGRAM
Pin
D0–D7
S-IN
Function
Parallel Data Inputs
Serial Data Input
SHIFT Control
HOLD, /LOAD Control
Clock
S-IN
D
D
Q
R
Q
0
D0
SEL0
SEL1
CLK
Q
R
Q
1
– Q6
MR
Master Reset
Q0–Q7
VCCO
Data Outputs
D1 – D6
VCC to Output
BITS 1-6
Q
R
Q7
D
D7
SEL1 (HOLD/LOAD)
SEL
0
(SHIFT)
CLK
MR
Rev.: F
Amendment: /0
M9999-032206
hbwhelp@micrel.com or (408) 955-1690
1
Issue Date: December 2005