5秒后页面跳转
捷配首页

Datasheet > SN74AVC16374DGGE4
SN74AVC16374DGGE4 PDF预览

SN74AVC16374DGGE4

更新时间： 2024-11-16 21:17:19
品牌 Logo 应用领域
德州仪器 - TI 驱动光电二极管输出元件逻辑集成电路
页数 文件大小 规格书
45页 2774K
描述
IC AVC SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48, PLASTIC, TSSOP-48, Bus Driver/Transceiver

阅读下载

中文翻译

获取价格

SN74AVC16374DGGE4 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：TSSOP
包装说明：TSSOP,针数：48
Reach Compliance Code：compliantHTS代码：8542.39.00.01
风险等级：5.22系列：AVC
JESD-30 代码：R-PDSO-G48JESD-609代码：e4
长度：12.5 mm逻辑集成电路类型：BUS DRIVER
湿度敏感等级：1位数：8
功能数量：2端口数量：2
端子数量：48最高工作温度：85 °C
最低工作温度：-40 °C输出特性：3-STATE
输出极性：TRUE封装主体材料：PLASTIC/EPOXY
封装代码：TSSOP封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度（摄氏度）：260
传播延迟（tpd）：8.4 ns认证状态：Not Qualified
座面最大高度：1.2 mm最大供电电压 (Vsup)：3.6 V
最小供电电压 (Vsup)：1.4 V标称供电电压 (Vsup)：1.5 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：GULL WING端子节距：0.5 mm
端子位置：DUAL处于峰值回流温度下的最长时间：NOT SPECIFIED
宽度：6.1 mmBase Number Matches：1

SN74AVC16374DGGE4 数据手册

 浏览型号SN74AVC16374DGGE4的Datasheet PDF文件第2页浏览型号SN74AVC16374DGGE4的Datasheet PDF文件第3页浏览型号SN74AVC16374DGGE4的Datasheet PDF文件第4页浏览型号SN74AVC16374DGGE4的Datasheet PDF文件第5页浏览型号SN74AVC16374DGGE4的Datasheet PDF文件第6页浏览型号SN74AVC16374DGGE4的Datasheet PDF文件第7页 
SN74AVCA406  
MMC, SD CARD, Memory Stick, SmartMedia, AND xD-Picture Card  
±15-kV ESD-PROTECTED VOLTAGE-TRANSLATION TRANSCEIVER  
www.ti.com  
SCES615H–OCTOBER 2004–REVISED JANUARY 2007  
FEATURES  
•
Transceiver for Memory Card Interface  
[MultiMediaCard (MMC), Secure Digital (SD),  
Memory Stick™ Compliant Products,  
SmartMedia Card, and xD-Picture Card™]  
•
•
ESD Protection for Card-Side Pins (B Port)  
–
±15 kV (±12 kV on Pin 14B) – IEC 61000-4-2  
ESD, Air-Gap Discharge  
–
±8 kV – IEC 61000-4-2 ESD, Contact  
•
•
•
Configurable I/O Switching Levels With  
Dual-Supply Pins Operating Over Full 1.4-V to  
3.6-V Power-Supply Range  
Discharge  
ESD Protection for A-Port Pins (Tested Per  
JESD 22) Exceeds  
For Low-Power Operation, A Ports Are Placed  
in High-Impedance State When Card-Side  
Supply Voltage Is Switched Off  
–
2000-V Human-Body Model (A114-B  
1000-V Charged-Device Model (C101)  
–
xxxxxxx  
Latch-Up Performance Exceeds 100 mA Per  
JESD 78, Class II  
DESCRIPTION/ORDERING INFORMATION  
The SN74AVCA406 is a transceiver for interfacing microprocessors with MultiMediaCards (MMCs), secure  
digital (SD) cards, Memory Stick™ compliant products, SmartMedia cards, or xD-Picture Cards™. It integrates  
high ESD protection, which eliminates the need for external ESD diodes. Two supply-voltage pins allow the  
A-port and B-port input switching thresholds to be configured separately. The A port is designed to track VCCA  
,
while the B port is designed to track VCCB0 and VCCB1. VCCA ,VCCB0 and VCCB1 can accept any supply voltage  
from 1.4 V to 3.6 V.  
Memory card standards recommend high ESD protection for devices that connect directly to the external  
memory card. To meet this need, the SN74AVCA406 incorporates ±15-kV air-gap discharge and ±8-kV contact  
discharge protection on the card side. If VCCB0 and VCCB1 are switched off (no card inserted), the A-port outputs  
are placed in the high-impedance state to conserve power.  
The SN74AVCA406 enables system designers to easily interface low-voltage microprocessors to different  
memory cards operating at higher voltages. The mode (MODE0 and MODE1) pins are used to configure the  
device to interface with different types of cards.  
The SN74AVCA406 is offered in the 48-ball MicroStar Jr.™ ball grid array (BGA) package. This package has  
dimensions of 4 × 4 mm, with a 0.5-mm ball pitch for effective board-space savings. Memory cards are widely  
used in mobile phones, PDAs, digital cameras, personal media players, camcorders, set-top boxes, etc. Low  
static power consumption and small package size make the SN74AVCA406 an ideal choice for these  
applications.  
ORDERING INFORMATION  
TA  
PACKAGE(1)  
ORDERABLE PART NUMBER  
SN74AVCA406DGGR  
TOP-SIDE MARKING  
TSSOP – DGGR  
VFBGA – GQC  
Tape and reel  
Tape and reel  
Tape and reel  
AVCA406  
–40°C to 85°C  
SN74AVCA406GQCR  
WM406  
VFBGA – ZQC (Pb-free)  
SN74AVCA406ZQCR  
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at  
www.ti.com/sc/package.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2004–2007, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
1234567...45

中文翻译

下载PDF

与SN74AVC16374DGGE4相关器件

型号 品牌 获取价格 描述 数据表
SN74AVC16374DGGR TI

获取价格

 		16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
SN74AVC16374DGV TI

获取价格

 		16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
SN74AVC16374DGVR TI

获取价格

 		16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
SN74AVC16374GQLR TI

获取价格

 		16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
SN74AVC16374ZQLR TI

获取价格

 		16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
SN74AVC16501DGG TI

获取价格

 		AVC SERIES, 18-BIT REGISTERED TRANSCEIVER, TRUE OUTPUT, PDSO56, PLASTIC, TSSOP-56
SN74AVC16601DGG TI

获取价格

 		AVC SERIES, 18-BIT REGISTERED TRANSCEIVER, TRUE OUTPUT, PDSO56
SN74AVC16601DGGR TI

获取价格

 		AVC SERIES, 18-BIT REGISTERED TRANSCEIVER, TRUE OUTPUT, PDSO56, PLASTIC, TSSOP-56
SN74AVC16646 TI

获取价格

 		16-BIT BUS TRANSCEIVER AND REGISTER WITH 3-STATE OUTPUTS
SN74AVC16646DGG TI

获取价格

 		AVC SERIES, DUAL 8-BIT REGISTERED TRANSCEIVER, TRUE OUTPUT, PDSO56

与SN74AVC16374DGGE4相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证