P R O D U C T B R I E F
Infineon’s IWORX controller is a multi-service
engine for wireless access network and media
gateway linecards. Designed to transport ATM traffic
over PDH and SDH based networks, IWORX enables
the adaptation of voice, video and data traffic via
AAL2 at speeds up to 155 Mbit/s.
Shared location of 2G and 3G mobile networks for
easy network migration path is facilitated via AAL1
and Circuit Emulation Service (CES). The IWORX
controller also provides flexible PDH port bandwidth
adjustment through four IMA groups, and imple-
ments all ATM service categories (CBR, VBR, UBR)
for full Quality of Service (QoS) support.
Infineon’s IWORX system on a chip with integrated
memory and high-level API command interface is
also easy to use, making it the most optimized
solution in terms of performance, small BOM and
power economy.
IWORX
Applications
G.804, OAM, IMA and traffic
I Mux/demux of up to 255 AAL2
channels per AAL2 ATM VCC
I AAL5 support according to ITU-T
I.363-5
I 3G base transceiver stations
(Node B) and radio network
controller (RNC)
management
I Highly integrated IC reduces
power requirements, BOM and
overall costs
I System recovery support by
configuration and connection
data read-back
I Multiservice Linecards
I Multimedia Gateways
ATM Layer Functions
I Address Reduction and Header
Translation
Features
I Traffic Management
I Operating and Maintenance
according to ITU-T I.610 (99)
I Boundary scan support according
to IEEE 1149.1
I Throughput up to 155 Mbit/s
I On-chip CPU for simple protocol
handling and control
ATM Adaptation Layer Functions
I Supports up to 256 AAL1 ATM
VCCs
I Supports structured and unstruc-
tured CES modes for eight
E1/T1/J1 links
I Easy to configure with
maintenance and in-band
communication via message
based interface
TC Sub-layer Functions
I ATM TC sub-layer (ITU-T G.804)
I Support for G.804 on fractional
E1/T1/J1 (ATMF-FN64)
I Embedded Memory
I Supports up to 8 HDLC channels
for CCS
I IMA8 (ATMF AF-PHY 0086.001)
I Port specific mode selection
I Time slot specific protocol
selection such as AAL1 and
G.804
I Supports Channel Associated
Signaling (CAS)
I Built in SRTS (selectable) and
ACM clock recovery methods
I Supports AAL2 mode features
according to ITU-T I.363.2
I Supports up to 16 AAL2 ATM
VCCs
Physical Characteristics
I Power consumption <2 W
I Power supply 3.3 V I/O,
1.8 V core
I Temperature range
-40°C to +85°C
I Dedicated hardware modules for
fast and reliable performance
intensive communication
functions such as AAL1, AAL2,
I W O R X
AT M I n t e r w o r k i n g C o n t r o l l e r
P X F 4 2 2 5 E
N e v e r s t o p t h i n k i n g.