CALIFORNIA MICRO DEVICES
CALIFORNIA MICRO DEVICES
PAC VGA-100/101
VGA PROTECTION AND TERMINATION NETWORK
Features
Application
ESD protection for VGA (video) port in
PCs and notebooks.
7 channel ESD protection
15KV ESD protection (HBM)
8KV contact, 15KV air discharge ESD protection per
IEC 1000-4-2 (Level 4)
Low loading capacitance, 4.5pF typical
Product Description
The PAC VGA-100/101 acts as a transmission line terminating and ESD protection device. It provides 75 Ohm parallel
terminations for the R, G, B lines and series terminations for the Horizontal and Vertical Sync lines and two monitor ID
lines which provide Plug and Play logic signals. In addition, all interface lines provide Level 4 ESD protection per the
IEC1000-4-2 contact discharge Specification. The PAC VGA-100 provides internal pull-up resistors for the two monitor ID
lines. The PAC VGA-101 omits these internal pull-ups so that different pull-up resistor values can be added externally.
SCHEMATIC CONFIGURATION
ABSOLUTE MAXIMUM RATINGS
Diode Forward DC Current (Note 1)
Storage Temperature
Operating Temperature Range
20mA
-65°C to 150°C
0°C to 70°C
DC Voltage at any Channel Input VN-0.5V to VP+0.5V
Note 1: Only one diode conducting at a time.
R1=75Ω, R2=33Ω, R3=2.2KΩ (VGA-100 only)
(*) R3 Removed (VGA-101 only)
Typical Connection Diagram
(**) For best ESD protection, minimize trace lengths between PAC VGA-100/101 and the video connector.
©1999 California Micro Devices Corp. All rights reserved.
©1999 California Micro Devices Corp. All rights reserved.
P/Active® is a registered trademark and PAC is a trademark of California Micro Devices.
C0170997D
1 / 99
1
215 Topaz Street, Milpitas, California 95035
215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Tel: (408) 263-3214
Fax: (408) 263-7846
Fax: (408) 263-7846
www.calmicro.com
1/ 99
www.calmicro.com
1