NCP5106A, NCP5106B
High Voltage, High and Low
Side Driver
The NCP5106 is a high voltage gate driver IC providing two
outputs for direct drive of 2 N−channel power MOSFETs or IGBTs
arranged in a half−bridge configuration version B or any other
high−side + low−side configuration version A.
It uses the bootstrap technique to ensure a proper drive of the
high−side power switch. The driver works with 2 independent inputs.
http://onsemi.com
MARKING
DIAGRAMS
Features
1
8
• High Voltage Range: Up to 600 V
• dV/dt Immunity 50 V/nsec
• Negative Current Injection Characterized Over the Temperature Range
• Gate Drive Supply Range from 10 V to 20 V
• High and Low Drive Outputs
SOIC−8
D SUFFIX
CASE 751
5106x
ALYW
G
1
• Output Source / Sink Current Capability 250 mA / 500 mA
• 3.3 V and 5 V Input Logic Compatible
NCP5106x
AWLG
1
PDIP−8
P SUFFIX
CASE 626
YYWW
• Up to V Swing on Input Pins
CC
• Extended Allowable Negative Bridge Pin Voltage Swing to −10 V
for Signal Propagation
• Matched Propagation Delays Between Both Channels
• Outputs in Phase with the Inputs
• Independent Logic Inputs to Accommodate All Topologies (Version A)
• Cross Conduction Protection with 100 ns Internal Fixed Dead Time
(Version B)
NCP5106 = Specific Device Code
x
A
= A or B version
= Assembly Location
= Wafer Lot
L or WL
Y or YY
W or WW = Work Week
G or G
= Year
= Pb−Free Package
• Under V LockOut (UVLO) for Both Channels
CC
• Pin−to−Pin Compatible with Industry Standards
• These are Pb−Free Devices
PINOUT INFORMATION
VBOOT
VCC
IN_HI
IN_LO
GND
1
2
3
4
8
7
6
5
DRV_HI
BRIDGE
DRV_LO
Typical Applications
• Half−Bridge Power Converters
• Any Complementary Drive Converters (Asymmetrical Half−Bridge,
Active Clamp) (A Version Only).
8 Pin Package
• Full−Bridge Converters
ORDERING INFORMATION
†
Device
Package
Shipping
NCP5106APG
PDIP−8
50 Units / Rail
(Pb−Free)
NCP5106ADR2G
NCP5106BPG
SOIC−8 2500 / Tape & Reel
(Pb−Free)
PDIP−8
50 Units / Rail
(Pb−Free)
NCP5106BDR2G
SOIC−8 2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
©
Semiconductor Components Industries, LLC, 2010
1
Publication Order Number:
March, 2010 − Rev. 5
NCP5106/D