APPLICABLE STANDARD
OPERATING
STORAGE
1
-40C to+85C
-40C to +85C
(90%RH MAX)
(90%RH MAX)
TEMPERATURE RANGE
TEMPERATURE RANGE
CHARACTERISTIC
IMPEDANCE
RATING VOLTAGE
CURRENT
AC 500
2
V
-
A
APPLICABLE
CABLE
PECULIARITY
NON MAGNETIC
-
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
-
×
-
MARKING
ELECTRIC CHARACTERISTICS
CENTER CONTACT
30
500
m MAX.
M MIN.
CONTACT RESISTANCE
INSULATION RESISTANCE
VOLTAGE PROOF
100 mA MAX (DC OR 1000 Hz).
-
-
-
×
×
×
500 V DC.
1500 V AC FOR 1 min.CURRENT LEAKAGE 2mA MAX.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
INSERTION FORCE
EXTRACTION FARCE
INSERTION FORCE
N MAX.
N MIN
-
-
-
-
-
-
EXTRACTION FORCES
MEASURED BY
WIDTH STEEL GAUGE
N MAX.
INSERTION AND
MEASURED BY APPLICABLE CONNECTOR.
WITHDRAWAL FORCES
EXTRACTION FARCE
N MIN.
-
-
MECHANICAL OPERATION 60,000 TIMES INSERTIONS AND EXTRACTIONS
1) CONTACT RESISTANCE:
60 mMAX.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
1
×
-
VIBRATION
SHOCK
FREQUENCY 10 to 500 Hz
1) NO ELECTRICAL DISCONTINUITY OF
1 s.
2) NO DAMAGE, CRACK AND LOOSENESS
SINGLE AMPLITUDE 0.75 mm, 98 m/s2
-
-
-
×
×
-
AT 10 CYCLES FOR
735 m/s2 DIRECTIONS OF PULSE
AT TIMES FOR DIRECTIONS.
APPLYING A PULL FORCE THE CABLE AXIALLY
AT N MAX.
3
DIRECTIONS.
OF PARTS.
6
ms
3
3
CABLE CLAMP
1) NO WITHDRAWAL AND BREAKAGE OF
CABLE.
ROBUSTNESS
(AGAINST CABLE PULL)
2) NO BREAKAGE OF CLAMP.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT +40 ℃ 、 95%
TOTAL ( 96 H)
1) INSULATION RESISTANCE: 10
(AT HIGH HUMIDITY)
M MIN.
2) INSULATION RESISTANCE: 500 M MIN.
(AT DRY)
×
-
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
TEMPERATURE -40→ 20 to 35→ +85→ 20 to 35 C
TIME
30
→
3
→ 30
→
3 min.
×
×
-
-
UNDER
5
CYCLES.
CORROSION SALT MIST
EXPOSED IN 5% SALT WATER SPRAY FOR 48 h.
NO HEAVY CORROSION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
1
△
1
DIS-D-00000161
HA.NISHIMURA
MH.TSUCHIDA
15.04.07
14.09.30
REMARK
RoHS COMPLIANT, NON MAGNETIC
APPROVED
CHECKED
DESIGNED
KH.IKEDA
MH.TSUCHIDA
HA.NISHIMURA
14.09.30
14.09.29
This specification shall be performed assembled into MRF14-CON(M)-14M
(CL313-0706-0)
Note
It contain temperature rise by current carrying
1
DRAWN
HA.NISHIMURA
14.09.29
Unless otherwise specified, refer to JIS C 5402.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC4-336891-00
MRF14-CON(M1)
CL313-0710-7-00
PART NO.
CODE NO.
SPECIFICATION SHEET
1
1/1
HIROSE ELECTRIC CO., LTD.
△
FORM HD0011-2-1