5秒后页面跳转
MC100ES6014EJ PDF预览

MC100ES6014EJ

更新时间: 2024-11-06 11:10:55
品牌 Logo 应用领域
飞思卡尔 - FREESCALE 时钟驱动器
页数 文件大小 规格书
8页 258K
描述
2.5 V/3.3 V 1:5 Differential ECL/PECL/HSTL/LVDS Clock Driver

MC100ES6014EJ 数据手册

 浏览型号MC100ES6014EJ的Datasheet PDF文件第2页浏览型号MC100ES6014EJ的Datasheet PDF文件第3页浏览型号MC100ES6014EJ的Datasheet PDF文件第4页浏览型号MC100ES6014EJ的Datasheet PDF文件第5页浏览型号MC100ES6014EJ的Datasheet PDF文件第6页浏览型号MC100ES6014EJ的Datasheet PDF文件第7页 
MC100ES6014  
Rev 3, 06/2005  
Freescale Semiconductor  
Technical Data  
2.5 V/3.3 V 1:5 Differential  
ECL/PECL/HSTL/LVDS Clock Driver  
MC100ES6014  
The MC100ES6014 is a low skew 1-to-5 differential driver, designed with clock  
distribution in mind, accepting two clock sources into an input multiplexer. The  
ECL/PECL input signals can be either differential or single-ended (if the VBB  
output is used). HSTL and LVDS inputs can be used when the ES6014 is  
operating under PECL conditions.  
DT SUFFIX  
20-LEAD TSSOP PACKAGE  
CASE 948E-03  
The ES6014 specifically guarantees low output-to-output skew. Optimal  
design, layout, and processing minimize skew within a device and from device to  
device.  
To ensure that the tight skew specification is realized, both sides of any  
differential output need to be terminated identically into 50 even if only one  
output is being used. If an output pair is unused, both outputs may be left open  
(unterminated) without affecting skew.  
The common enable (EN) is synchronous, outputs are enabled/disabled in the  
LOW state. This avoids a runt clock pulse when the device is enabled/disabled  
as can happen with an asynchronous control. The internal flip flop is clocked on  
the falling edge of the input clock; therefore, all associated specification limits are  
referenced to the negative edge of the clock input.  
EJ SUFFIX  
20-LEAD TSSOP PACKAGE  
Pb-FREE PACKAGE  
CASE 948E-03  
The MC100ES6014, as with most other ECL devices, can be operated from a  
positive VCC supply in PECL mode. This allows the ES6014 to be used for high  
performance clock distribution in +3.3 V or +2.5 V systems. Single ended CLK  
input pin operation is limited to a VCC 3.0 V in PECL mode, or VEE –3.0 V in  
ECL mode. Designers can take advantage of the ES6014's performance to  
distribute low skew clocks across the backplane or the board.  
ORDERING INFORMATION  
Device  
Package  
TSSOP-20  
MC100ES6014DT  
MC100ES6014DTR2  
MC100ES6014EJ  
MC100ES6014EJR2  
TSSOP-20  
TSSOP-20 (Pb-Free)  
TSSOP-20 (Pb-Free)  
Features  
25 ps Within Device Skew  
400 ps Typical Propagation Delay  
Maximum Frequency > 2 GHz Typical  
The 100 Series Contains Temperature Compensation  
PECL and HSTL Mode: VCC = 2.375 V to 3.8 V with VEE = 0 V  
ECL Mode: VCC = 0 V with VEE = –2.375 V to –3.8 V  
LVDS and HSTL Input Compatible  
Open Input Default State  
20-Lead Pb-Free Package Available  
© Freescale Semiconductor, Inc., 2005. All rights reserved.  

与MC100ES6014EJ相关器件

型号 品牌 获取价格 描述 数据表
MC100ES6014EJR2 FREESCALE

获取价格

2.5 V/3.3 V 1:5 Differential ECL/PECL/HSTL/LVDS Clock Driver
MC100ES6017 FREESCALE

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017 ONSEMI

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017DW ONSEMI

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017DW FREESCALE

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017DWR2 FREESCALE

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017DWR2 ONSEMI

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017EG ONSEMI

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017EG FREESCALE

获取价格

3.3V ECL/PECL Quad Differential Receiver
MC100ES6017EGR2 FREESCALE

获取价格

3.3V ECL/PECL Quad Differential Receiver