5秒后页面跳转
IPC-200_10 PDF预览

IPC-200_10

更新时间: 2024-09-20 11:08:43
品牌 Logo 应用领域
明纬 - MEANWELL 电脑PC
页数 文件大小 规格书
3页 376K
描述
200W Industrial 1U ATX 12V/P4 PC Power Supply

IPC-200_10 数据手册

 浏览型号IPC-200_10的Datasheet PDF文件第2页浏览型号IPC-200_10的Datasheet PDF文件第3页 
200W Industrial 1U ATX 12V/P4 PC Power Supply  
IPC-200  
Features :  
Meet 1U rack mount system  
Universal AC input / Full range  
Active power factor 94%  
Protections:Short circuit/Overload/Over voltage  
Forced air cooling by built-in DC fan  
With power good and fail signal output  
Built-in remote ON-OFF control  
Remote DC sense +5V and +3.3V  
With +5VSB:0 ~ 2.0A max.  
100% full load burn-in test  
High efficiency  
2 years warranty  
SPECIFICATION  
MODEL  
IPC-200  
OUTPUT NUMBER  
CH1  
CH2  
5V  
CH3  
CH4  
CH5  
STANDBY  
5VSB  
DC VOLTAGE  
3.3V  
12V  
-5V  
-12V  
1A  
RATED CURRENT  
CURRENT RANGE  
15A  
25A  
13A  
0.5A  
2A  
0 ~ 15A  
1 ~ 25A  
1 ~ 13A  
0 ~ 0.5A  
0.1 ~ 1A  
0 ~ 2A  
200W continue. Combine power max.:+5V,+3.3V,+12V output shall not exceed 180W max. (The +5 & +3.3Volt combine total output shall not exceed 150W)  
(The -5 & -12Volt combine total output shall not exceed 12W)  
RATED POWER  
RIPPLE & NOISE (max.) Note.2 50mVp-p  
50mVp-p  
120mVp-p  
100mVp-p  
120mVp-p  
50mVp-p  
OUTPUT  
VOLTAGE ADJ. RANGE  
CH2 : 5.05 ~ 5.5V  
VOLTAGE TOLERANCE Note.3 CH1: 5.0%  
5.0%  
1.0%  
5.0%  
7.0%  
1.0%  
7.0%  
8.0%  
2.0%  
8.0%  
10%  
2.0%  
10%  
5.0%  
1.0%  
5.0%  
LINE REGULATION  
LOAD REGULATION  
SETUP, RISE TIME  
1.0%  
5.0%  
800ms, 20ms/230VAC  
2500ms, 20ms/115VAC at full load  
HOLD TIME (Typ.)  
16ms/230VAC  
90 ~ 264VAC  
47 ~ 63Hz  
75%  
16ms/115VAC at full load  
VOLTAGE RANGE  
FREQUENCY RANGE  
EFFICIENCY (Typ.)  
AC CURRENT (Typ.)  
INRUSH CURRENT (Typ.)  
LEAKAGE CURRENT(max.)  
INPUT  
3.5A/115VAC 1.7A/230VAC  
40A/115VAC  
3mA/240VAC  
80A/230VAC  
105 ~ 150% rated output power  
OVER LOAD  
Protection type : Shut down o/p voltage, re-power on to recover  
+3.3V, +5V: 110% ~ 140% of rated voltage ; +12V:13.2V ~ 16V  
Protection type : Shut down o/p voltage, re-power on to recover  
PROTECTION OVER VOLTAGE  
SHORT CIRCUIT  
All output equipped with short circuit  
Protection type : Shut down o/p voltage, re-power on to recover  
POWER GOOD SIGNAL  
The TTL compatible signal out with 100ms to 500ms delay after power set up  
The TTL compatible signal will go down at least 1ms before +5V below 4.75V  
Power off: PS-ON = "Hi" or ">2V" ; Power on: PS-ON = "Low" or "<0.5V"  
-10 ~ +60 (Refer to output load derating curve)  
FUNCTION  
POWER FAIL SIGNAL  
PS-ON INPUT SIGNAL  
WORKING TEMP.  
WORKING HUMIDITY  
20 ~ 90% RH non-condensing  
-40 ~ +85 10 ~ 95% RH  
ENVIRONMENT STORAGE TEMP., HUMIDITY  
TEMP. COEFFICIENT  
0.05% / (0 ~ 50  
)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes  
UL60950-1, TUV EN60950-1 approved  
VIBRATION  
SAFETY STANDARDS  
WITHSTAND VOLTAGE  
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC  
SAFETY & ISOLATION RESISTANCE  
I/P-O/P, I/P-FG, O/P-FG:50M Ohms / 500VDC / 25 / 70% RH  
Compliance to EN55022 (CISPR22) Class B, Design refer to FCC part 15 Class B  
Compliance to EN61000-3-2,-3  
EMC  
(Note 4)  
EMI CONDUCTION & RADIATION  
HARMONIC CURRENT  
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A  
94.1K hrs min. MIL-HDBK-217F (25  
EMS IMMUNITY  
MTBF  
)
ATX main power connector * 1ea; +12V power connector * 1ea  
Peripheral power connector * 3ea; Floppy drive power connector * 1ea  
Forced air ventilation by 4cm DC fan  
CONNECTOR  
OTHERS  
COOLING  
240*83*40mm (L*W*H)  
DIMENSION  
PACKING  
1.44Kg; 10pcs/15.4Kg/0.89CUFT  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.  
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
3. Load regulation is measured from 20% to 100% max. Load.  
NOTE  
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets  
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”  
(as available on http://www.meanwell.com)  
5. Derating may be needed under low input voltages. Please check the derating curve for more details.  
File Name: IPC-200-SPEC 2010-10-18  

与IPC-200_10相关器件

型号 品牌 获取价格 描述 数据表
IPC-200_1112 MEANWELL

获取价格

200W Industrial 1U ATX 12V/P4 PC Power Supply
IPC218N04N3 INFINEON

获取价格

新型 OptiMOS? 40V 和 60V 是英飞凌新一代的功率 MOSFET,它针对服务
IPC218N06N3 INFINEON

获取价格

新型 OptiMOS? 40V 和 60V 是英飞凌新一代的功率 MOSFET,它针对服务
IPC21I-SO-G-LF ETC

获取价格

Precision Feedback Controllers Fixed and PTAT references
IPC21I-SO-G-LF-TR ETC

获取价格

Precision Feedback Controllers Fixed and PTAT references
IPC-250 MEANWELL

获取价格

250W Industrial 1U ATX 12V/P4 PC Power Supply
IPC-250_10 MEANWELL

获取价格

250W Industrial 1U ATX 12V/P4 PC Power Supply
IPC-250_1108 MEANWELL

获取价格

250W Industrial 1U ATX 12V/P4 PC Power Supply
IPC26N12N INFINEON

获取价格

Metal Oxide Semiconductor Field Effect Transistor
IPC26N12N_15 INFINEON

获取价格

Metal Oxide Semiconductor Field Effect Transistor