5秒后页面跳转
捷配首页

Datasheet > 存储 > SRAM> CY7C1363C-100BGI
CY7C1363C-100BGI PDF预览

CY7C1363C-100BGI

更新时间： 2024-11-16 03:57:35
品牌 Logo 应用领域
赛普拉斯 - CYPRESS 存储内存集成电路静态存储器时钟
页数 文件大小 规格书
31页 562K
描述
9-Mbit (256K x 36/512K x 18) Flow-Through SRAM

阅读下载

中文翻译

获取价格

CY7C1363C-100BGI 技术参数

是否Rohs认证： 不符合生命周期：Obsolete
零件包装代码：BGA包装说明：22 X 14 MM, 2.40 MM HEIGHT, BGA-119
针数：119Reach Compliance Code：not_compliant
ECCN代码：3A991.B.2.AHTS代码：8542.32.00.41
风险等级：5.8Is Samacsys：N
最长访问时间：8.5 ns其他特性：FLOW THROUGH ARCHITECTURE
最大时钟频率 (fCLK)：100 MHzI/O 类型：COMMON
JESD-30 代码：R-PBGA-B119长度：22 mm
内存密度：9437184 bit内存集成电路类型：CACHE SRAM
内存宽度：18湿度敏感等级：3
功能数量：1端子数量：119
字数：524288 words字数代码：512000
工作模式：SYNCHRONOUS最高工作温度：85 °C
最低工作温度：-40 °C组织：512KX18
输出特性：3-STATE封装主体材料：PLASTIC/EPOXY
封装代码：BGA封装等效代码：BGA119,7X17,50
封装形状：RECTANGULAR封装形式：GRID ARRAY
并行/串行：PARALLEL峰值回流温度（摄氏度）：220
电源：2.5/3.3,3.3 V认证状态：Not Qualified
座面最大高度：2.4 mm最大待机电流：0.04 A
最小待机电流：3.14 V子类别：SRAMs
最大压摆率：0.18 mA最大供电电压 (Vsup)：3.6 V
最小供电电压 (Vsup)：3.135 V标称供电电压 (Vsup)：3.3 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子形式：BALL
端子节距：1.27 mm端子位置：BOTTOM
处于峰值回流温度下的最长时间：NOT SPECIFIED宽度：14 mm
Base Number Matches：1

CY7C1363C-100BGI 数据手册

 浏览型号CY7C1363C-100BGI的Datasheet PDF文件第2页浏览型号CY7C1363C-100BGI的Datasheet PDF文件第3页浏览型号CY7C1363C-100BGI的Datasheet PDF文件第4页浏览型号CY7C1363C-100BGI的Datasheet PDF文件第5页浏览型号CY7C1363C-100BGI的Datasheet PDF文件第6页浏览型号CY7C1363C-100BGI的Datasheet PDF文件第7页 
CY7C1361C  
CY7C1363C  
9-Mbit (256K x 36/512K x 18) Flow-Through SRAM  
Features  
Functional Description[1]  
• Supports 100, 133-MHz bus operations  
• Supports 100-MHz bus operations (Automotive)  
• 256K × 36/512K × 18 common I/O  
The CY7C1361C/CY7C1363C is a 3.3V, 256K x 36/512K x 18  
Synchronous Flow-through SRAMs, respectively designed to  
interface with high-speed microprocessors with minimum glue  
logic. Maximum access delay from clock rise is 6.5 ns  
(133-MHz version). A 2-bit on-chip counter captures the first  
address in a burst and increments the address automatically  
for the rest of the burst access. All synchronous inputs are  
gated by registers controlled by a positive-edge-triggered  
Clock Input (CLK). The synchronous inputs include all  
addresses, all data inputs, address-pipelining Chip Enable  
(CE1), depth-expansion Chip Enables (CE2 and CE3[2]), Burst  
Control inputs (ADSC, ADSP, and ADV), Write Enables (BWx,  
and BWE), and Global Write (GW). Asynchronous inputs  
include the Output Enable (OE) and the ZZ pin.  
• 3.3V –5% and +10% core power supply (VDD  
)
• 2.5V or 3.3V I/O power supply (VDDQ  
)
• Fast clock-to-output times  
— 6.5 ns (133-MHz version)  
• Provide high-performance 2-1-1-1 access rate  
• User-selectable burst counter supporting Intel®  
Pentium® interleaved or linear burst sequences  
• Separate processor and controller address strobes  
• Synchronous self-timed write  
The CY7C1361C/CY7C1363C allows either interleaved or  
linear burst sequences, selected by the MODE input pin. A  
HIGH selects an interleaved burst sequence, while a LOW  
selects a linear burst sequence. Burst accesses can be  
initiated with the Processor Address Strobe (ADSP) or the  
cache Controller Address Strobe (ADSC) inputs. Address  
advancement is controlled by the Address Advancement  
(ADV) input.  
• Asynchronous output enable  
• Available in lead-free 100-Pin TQFP package, lead-free  
and non lead-free 119-Ball BGA package and 165-Ball  
FBGA package  
• TQFP Available with 3-Chip Enable and 2-Chip Enable  
• IEEE 1149.1 JTAG-Compatible Boundary Scan  
•“ZZ” Sleep Mode option  
Addresses and chip enables are registered at rising edge of  
clock when either Address Strobe Processor (ADSP) or  
Address Strobe Controller (ADSC) are active. Subsequent  
burst addresses can be internally generated as controlled by  
the Advance pin (ADV).  
The CY7C1361C/CY7C1363C operates from a +3.3V core  
power supply while all outputs may operate with either a +2.5  
or +3.3V supply. All inputs and outputs are JEDEC-standard  
JESD8-5-compatible.  
Selection Guide  
133 MHz  
6.5  
100 MHz  
8.5  
Unit  
ns  
Maximum Access Time  
Maximum Operating Current  
250  
180  
mA  
mA  
mA  
Maximum CMOS Standby Current  
Comm/Ind’l  
Automotive  
40  
40  
60  
Notes:  
1. For best-practices recommendations, please refer to the Cypress application note System Design Guidelines on www.cypress.com.  
2. CE is for A version of TQFP (3 Chip Enable Option) and 165 FBGA package only. 119 BGA is offered only in 2 Chip Enable.  
3
Cypress Semiconductor Corporation  
Document #: 38-05541 Rev. *F  
•
198 Champion Court  
•
San Jose, CA 95134-1709  
•
408-943-2600  
Revised September 14, 2006  
[+] Feedback  
1234567...31

中文翻译

下载PDF

与CY7C1363C-100BGI相关器件

型号 品牌 获取价格 描述 数据表
CY7C1363C-100BGXC CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-100BGXI CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-100BZC CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-100BZI CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-100BZXC CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-100BZXI CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-117AJXC CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-117AJXI CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-117AXC CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM
CY7C1363C-117AXI CYPRESS

获取价格

 		9-Mbit (256K x 36/512K x 18) Flow-Through SRAM

与CY7C1363C-100BGI相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证