Datasheet > XC18V01SO20C0901

XC18V01SO20C0901

更新时间： 2024-11-11 20:05:35

品牌	Logo	应用领域
赛灵思 - XILINX		光电二极管内存集成电路
页数	文件大小	规格书
30页	607K
描述
Configuration Memory, 128KX8, 15ns, Parallel/serial, CMOS, PDSO20, SOIC-20

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

XC18V01SO20C0901 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	SOIC	包装说明：	SOP,
针数：	20	Reach Compliance Code：	compliant
ECCN代码：	3A001.B.1.A	HTS代码：	8542.39.00.01
风险等级：	5.58	最长访问时间：	15 ns
JESD-30 代码：	R-PDSO-G20	JESD-609代码：	e0
长度：	12.8 mm	内存密度：	1048576 bit
内存集成电路类型：	CONFIGURATION MEMORY	内存宽度：	8
湿度敏感等级：	3	功能数量：	1
端子数量：	20	字数：	131072 words
字数代码：	128000	工作模式：	SYNCHRONOUS
最高工作温度：	85 °C	最低工作温度：	-40 °C
组织：	128KX8	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	并行/串行：	PARALLEL/SERIAL
峰值回流温度（摄氏度）：	225	认证状态：	Not Qualified
座面最大高度：	2.65 mm	最大供电电压 (Vsup)：	3.6 V
最小供电电压 (Vsup)：	3 V	标称供电电压 (Vsup)：	3.3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	TIN LEAD
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	30
宽度：	7.5 mm	Base Number Matches：	1

XC18V01SO20C0901 数据手册

XC18V00 Series In-System

Programmable Configuration

PROMs

DS026 (v3.10) April 17, 2003

Product Specification

•

Dual configuration modes

Features

Serial Slow/Fast configuration (up to 33 MHz)

Parallel (up to 264 Mb/s at 33 MHz)

•

In-system programmable 3.3V PROMs for

configuration of Xilinx FPGAs

Endurance of 20,000 program/erase cycles

•

5V tolerant I/O pins accept 5V, 3.3V and 2.5V signals

3.3V or 2.5V output capability

Program/erase over full commercial/industrial

voltage and temperature range

Available in PC20, SO20, PC44 and VQ44 packages

•

IEEE Std 1149.1 boundary-scan (JTAG) support

Simple interface to the FPGA

Design support using the Xilinx Alliance and

Foundation series software packages.

Cascadable for storing longer or multiple bitstreams

Low-power advanced CMOS FLASH process

•

JTAG command initiation of standard FPGA

configuration

Description

Xilinx introduces the XC18V00 series of in-system program-

mable configuration PROMs (Figure 1). Devices in this 3.3V

family include a 4-megabit, a 2-megabit, a 1-megabit, a

When the FPGA is in Master-SelectMAP mode, the FPGA

generates a configuration clock that drives the PROM.

When the FPGA is in Slave-Parallel or Slave-SelectMAP

Mode, an external oscillator generates the configuration

clock that drives the PROM and the FPGA. After CE and OE

are enabled, data is available on the PROMs DATA (D0-D7)

pins. New data is available a short access time after each

rising clock edge. The data is clocked into the FPGA on the

following rising edge of the CCLK. Neither Slave-Parallel

nor SelectMAP utilize a Length Count, so a free-running

oscillator can be used in the Slave-Parallel or Slave-

SelecMAP modes.

512-Kbit, and

256-Kbit PROM that provide an

easy-to-use, cost-effective method for re-programming and

storing large Xilinx FPGA or CPLD configuration bitstreams.

When the FPGA is in Master Serial mode, it generates a

configuration clock that drives the PROM. A short access

time after CE and OE are enabled, data is available on the

PROM DATA (D0) pin that is connected to the FPGA D

pin. New data is available a short access time after each ris-

ing clock edge. The FPGA generates the appropriate num-

ber of clock pulses to complete the configuration. When the

FPGA is in Slave Serial mode, the PROM and the FPGA are

clocked by an external clock.

Multiple devices can be concatenated by using the CEO

output to drive the CE input of the following device. The

clock inputs and the DATA outputs of all PROMs in this

chain are interconnected. All devices are compatible and

can be cascaded with other members of the family or with

the XC17V00 one-time programmable Serial PROM family.

other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.

NOTICE OF DISCLAIMER: Xilinx is providing this design, code, or information "as is." By providing the design, code, or information as one possible implementation of this feature,

application, or standard, Xilinx makes no representation that this implementation is free from any claims of infringement. You are responsible for obtaining any rights you may

require for your implementation. Xilinx expressly disclaims any warranty whatsoever with respect to the adequacy of the implementation, including but not limited to any warranties

or representations that this implementation is free from claims of infringement and any implied warranties of merchantability or fitness for a particular purpose.

DS026 (v3.10) April 17, 2003

www.xilinx.com

Product Specification

1-800-255-7778

12 3 4 5 6 7...30

中文翻译

下载PDF

与XC18V01SO20C0901相关器件

型号	品牌	获取价格	描述	数据表
XC18V01SO20I	ETC	获取价格	Sequential Access Serial EEPROM
XC18V01SOG20C	XILINX	获取价格	In-System-Programmable Configuration PROMs
XC18V01SOG20C0901	XILINX	获取价格	Configuration Memory, 128KX8, 15ns, Parallel/serial, CMOS, PDSO20, SOIC-20
XC18V01SOG20C0936	XILINX	获取价格	Configuration Memory, 128KX8, 15ns, Parallel/serial, CMOS, PDSO20, SOIC-20
XC18V01VQ44	XILINX	获取价格	In-System Programmable Configuration PROMs
XC18V01VQ44C	XILINX	获取价格	In-System Programmable Configuration PROMs
XC18V01VQ44C0799	XILINX	获取价格	Configuration Memory, 128KX8, 15ns, Parallel/serial, CMOS, PQFP44, PLASTIC, VQFP-44
XC18V01VQ44C0901	XILINX	获取价格	Configuration Memory, 128KX8, 15ns, Parallel/serial, CMOS, PQFP44, PLASTIC, VQFP-44
XC18V01VQ44C0936	XILINX	获取价格	Configuration Memory, 128KX8, 15ns, Parallel/serial, CMOS, PQFP44, PLASTIC, VQFP-44
XC18V01VQ44I	ETC	获取价格	Sequential Access Serial EEPROM

与XC18V01SO20C0901相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

23
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

7
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

8
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

31

产品中心

服务支持

精选活动

关于我们

帮助中心

XC18V01SO20C0901

XC18V01SO20C0901 技术参数

XC18V01SO20C0901 数据手册

与XC18V01SO20C0901相关器件

与XC18V01SO20C0901相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

XC18V01SO20C0901

XC18V01SO20C0901 技术参数

XC18V01SO20C0901 数据手册

与XC18V01SO20C0901相关器件

与XC18V01SO20C0901相关文章

您还可以找

您在本页遇到什么问题？