5秒后页面跳转
XC18V02SO20 PDF预览

XC18V02SO20

更新时间: 2024-11-10 22:12:39
品牌 Logo 应用领域
赛灵思 - XILINX 可编程只读存储器
页数 文件大小 规格书
21页 227K
描述
In-System Programmable Configuration PROMs

XC18V02SO20 数据手册

 浏览型号XC18V02SO20的Datasheet PDF文件第2页浏览型号XC18V02SO20的Datasheet PDF文件第3页浏览型号XC18V02SO20的Datasheet PDF文件第4页浏览型号XC18V02SO20的Datasheet PDF文件第5页浏览型号XC18V02SO20的Datasheet PDF文件第6页浏览型号XC18V02SO20的Datasheet PDF文件第7页 
0
XC18V00 Series In-System  
Programmable Configuration  
PROMs  
R
0
0
DS026 (v4.0) June 11, 2003  
Product Specification  
Dual configuration modes  
Features  
-
-
Serial Slow/Fast configuration (up to 33 MHz)  
Parallel (up to 264 Mb/s at 33 MHz)  
In-system programmable 3.3V PROMs for  
configuration of Xilinx FPGAs  
-
-
Endurance of 20,000 program/erase cycles  
5V tolerant I/O pins accept 5V, 3.3V and 2.5V signals  
3.3V or 2.5V output capability  
Program/erase over full commercial/industrial  
voltage and temperature range (–40°C to +85°C)  
Available in PC20, SO20, PC44, and VQ44 packages  
IEEE Std 1149.1 boundary-scan (JTAG) support  
Simple interface to the FPGA  
Design support using the Xilinx Alliance and  
Foundation series software packages.  
Cascadable for storing longer or multiple bitstreams  
Low-power advanced CMOS FLASH process  
JTAG command initiation of standard FPGA  
configuration  
When the FPGA is in Master-SelectMAP mode, the FPGA  
generates a configuration clock that drives the PROM.  
When the FPGA is in Slave-Parallel or Slave-SelectMAP  
Mode, an external oscillator generates the configuration  
clock that drives the PROM and the FPGA. After CE and  
OE are enabled, data is available on the PROMs DATA  
(D0-D7) pins. New data is available a short access time  
after each rising clock edge. The data is clocked into the  
FPGA on the following rising edge of the CCLK. A free-run-  
ning oscillator can be used in the Slave-Parallel or  
Slave-SelecMAP modes.  
Description  
Xilinx introduces the XC18V00 series of in-system program-  
mable configuration PROMs (Figure 1). Devices in this 3.3V  
family include a 4-megabit, a 2-megabit, a 1-megabit, and a  
512-kilobit PROM that provide an easy-to-use, cost-effec-  
tive method for re-programming and storing Xilinx FPGA  
configuration bitstreams.  
When the FPGA is in Master Serial mode, it generates a  
configuration clock that drives the PROM. A short access  
time after CE and OE are enabled, data is available on the  
Multiple devices can be concatenated by using the CEO  
output to drive the CE input of the following device. The  
clock inputs and the DATA outputs of all PROMs in this  
chain are interconnected. All devices are compatible and  
can be cascaded with other members of the family or with  
the XC17V00 one-time programmable Serial PROM family.  
PROM DATA (D0) pin that is connected to the FPGA D  
IN  
pin. New data is available a short access time after each ris-  
ing clock edge. The FPGA generates the appropriate num-  
ber of clock pulses to complete the configuration. When the  
FPGA is in Slave Serial mode, the PROM and the FPGA  
are clocked by an external clock.  
CLK CE  
OE/Reset  
TCK  
Data  
Control  
CEO  
Serial  
or  
Parallel  
Interface  
TMS  
TDI  
and  
JTAG  
Interface  
Memory  
D0 DATA  
Serial or Parallel Mode  
Data  
Address  
TDO  
7
D[1:7]  
Parallel Interface  
CF  
DS026_01_090502  
Figure 1: XC18V00 Series Block Diagram  
©2003 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and further disclaimers are as listed at http://www.xilinx.com/legal.htm. All other  
trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.  
NOTICE OF DISCLAIMER: Xilinx is providing this design, code, or information "as is." By providing the design, code, or information as one possible implementation of this fea-  
ture, application, or standard, Xilinx makes no representation that this implementation is free from any claims of infringement. You are responsible for obtaining any rights you  
may require for your implementation. Xilinx expressly disclaims any warranty whatsoever with respect to the adequacy of the implementation, including but not limited to any war-  
ranties or representations that this implementation is free from claims of infringement and any implied warranties of merchantability or fitness for a particular purpose.  
DS026 (v4.0) June 11, 2003  
www.xilinx.com  
1
Product Specification  
1-800-255-7778  

与XC18V02SO20相关器件

型号 品牌 获取价格 描述 数据表
XC18V02SO20C XILINX

获取价格

In-System Programmable Configuration PROMs
XC18V02VQ44 XILINX

获取价格

In-System Programmable Configuration PROMs
XC18V02VQ44C XILINX

获取价格

In-System Programmable Configuration PROMs
XC18V02VQ44C0901 XILINX

获取价格

Configuration Memory, 256KX8, 20ns, Parallel/serial, CMOS, PQFP44, PLASTIC, VQFP-44
XC18V02VQ44I ETC

获取价格

Configuration EEPROM
XC18V02VQG44C XILINX

获取价格

In-System-Programmable Configuration PROMs
XC18V02VQG44C0901 XILINX

获取价格

Configuration Memory, 256KX8, 20ns, Parallel/serial, CMOS, PQFP44, PLASTIC, VQFP-44
XC18V02VQG44C0936 XILINX

获取价格

Configuration Memory, 256KX8, 20ns, Parallel/serial, CMOS, PQFP44, PLASTIC, VQFP-44
XC18V04PC20 XILINX

获取价格

In-System Programmable Configuration PROMs
XC18V04PC20C XILINX

获取价格

In-System Programmable Configuration PROMs