UCC27288
UCC27288
www.ti.com
SLUSE21A – JUNE 2020 – REVISED OCTOBER 2020
SLUSE21A – JUNE 2020 – REVISED OCTOBER 2020
UCC27288 2.5-A/3.5-A 120-V Half-Bridge Driver
with 8-V UVLO and External Bootstrap Diode
1 Features
3 Description
•
Drives two N-channel MOSFETs in high-side low-
The UCC27288 is a robust N-channel MOSFET driver
side configuration
with a maximum switch node (HS) voltage rating of
100 V. It allows for two N-channel MOSFETs to be
controlled in half-bridge or synchronous buck
configuration based topologies. Its 3.5-A peak sink
current and 2.5-A peak source current along with low
pull-up and pull-down resistance allows the
UCC27288 to drive large power MOSFETs with
minimum switching losses during the transition of the
MOSFET Miller plateau. Since the inputs are
independent of the supply voltage, UCC27288 can be
used in conjunction with both analog and digital
controllers. Two inputs are completely independent of
each other and therefore provides added control
design flexibility.
•
•
•
•
•
•
16-ns typical propagation delay
12-ns rise, 10-ns typical fall time with 1800-pF load
1-ns typical delay matching
Configurable external bootstrap diode
8-V typical undervoltage lockout
Absolute maximum negative voltage handling on
inputs (–5 V)
•
Absolute maximum negative voltage handling on
HS (–14 V)
•
•
•
•
•
3.5-A sink, 2.5-A Source output currents
Absolute maximum boot voltage 120 V
Inputs are independent of each other and VDD
Under voltage lockout for both channels
Specified from –40°C to 140°C junction
temperature
The input pins as well as the HS pin are able to
tolerate significant negative voltage, which improves
system robustness. The inputs are completely
independent of each other. This allows for control
flexibility where two outputs can be overlapped by
overlapping inputs if needed. Small propagation delay
and delay matching specifications minimize the dead-
time requirement which improves system efficiency.
2 Applications
•
•
•
•
•
Solar power optimizer
Merchant network & server PSU
Merchant telecom rectifiers
DC input BLDC motor drive
Test & measurement equipment
Under voltage lockout (UVLO) is provided for both the
high-side and low-side driver stages forcing the
outputs low if the VDD voltage is below the specified
threshold. No integrated bootstrap diode allows user
to use application-appropriate external bootstrap
diode. UCC27288 is offered in an SOIC8 package to
improve system robustness in harsh environments.
10V
75V
DBoot
VDD
HO
Device Information
PART NUMBER
PACKAGE (SIZE)(1)
HI
HB
To Load
UCC27288
SOIC8 (6 mm x 5mm)
LI
HS
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VSS
LO
Simplified Application Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1
Product Folder Links: UCC27288