UCC27289
UCC27289
www.ti.com
SLUSDU4 – DECEMBER 2020
SLUSDU4 – DECEMBER 2020
UCC27289 2.5-A/3.5-A 120-V Half-Bridge Driver
with 8-V UVLO and Negative Voltage Handling
1 Features
3 Description
•
Drives two N-channel MOSFETs in high-side low-
side configuration
The UCC27289 is a robust N-channel MOSFET driver
with a maximum switch node (HS) voltage rating of
100 V. It allows for two N-channel MOSFETs to be
controlled in half-bridge or synchronous buck
configuration based topologies. Its 3.5-A peak sink
current and 2.5-A peak source current along with low
pull-up and pull-down resistance allows the
UCC27289 to drive large power MOSFETs with
minimum switching losses during the transition of the
MOSFET Miller plateau. Since the inputs are
independent of the supply voltage, UCC27289 can be
used in conjunction with both analog and digital
controllers. Two inputs are completely independent of
each other and thus two outputs can be overlapped
by overlapping inputs, if needed. The enable and
disable functionality provides additional system
flexibility by reducing power consumption by the driver
and responds to fault events within the system.
•
•
•
•
Enable/disable functionality in DRC package
Low current (7-μA) consumption when disabled
16-ns typical propagation delay
12-ns rise, 10-ns fall time with 1800-pF load
(typical)
•
•
•
•
1-ns typical delay matching
Integrated 100V bootstrap diode
8-V typical undervoltage lockout
Absolute maximum negative voltage handling on
inputs (–5 V)
Absolute maximum negative voltage handling on
HS (–14 V)
3.5-A sink, 2.5-A Source output currents
Absolute maximum boot voltage 120 V
Inputs are independent of each other and VDD
Under voltage lockout for both channels
Specified from –40°C to 140°C junction
temperature
•
•
•
•
•
•
The input pins as well as the HS pin are able to
tolerate significant negative voltage, which improves
system robustness. Small propagation delay and
delay matching specifications minimize the dead-time
requirement which improves system efficiency.
2 Applications
•
•
•
•
•
Merchant network & server PSU
Merchant telecom rectifiers
DC input BLDC motor drive
Solar micro inverters
Under voltage lockout (UVLO) is provided for both the
high-side and low-side driver stages forcing the
outputs low if the VDD voltage is below the specified
threshold. An integrated bootstrap diode eliminates
the need for an external discrete diode in many
applications, which saves board space and reduces
system cost. UCC27289 is offered in multiple
packages to accommodate system requirements such
as robustness in harsh environments and density in
compact applications.
Test & measurement equipment
Simplified Application Diagram
10V
75V
Device Information
PART NUMBER
VDD
PACKAGE (SIZE)(1)
HO
EN
UCC27289D
SOIC8 (6mm x 5mm)
HB
HS
HI
LI
To Load
UCC27289DRC
UCC27289DRM
UCC27289DPR
SON10 (3mm x 3mm)
SON8 (4mm x 4mm)
SON10 (4mm x 4mm)
LO
VSS
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1