5秒后页面跳转
SSM2301CPZ-REEL7 PDF预览

SSM2301CPZ-REEL7

更新时间: 2024-11-07 04:02:47
品牌 Logo 应用领域
亚德诺 - ADI 消费电路商用集成电路音频放大器视频放大器
页数 文件大小 规格书
16页 434K
描述
Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier

SSM2301CPZ-REEL7 数据手册

 浏览型号SSM2301CPZ-REEL7的Datasheet PDF文件第2页浏览型号SSM2301CPZ-REEL7的Datasheet PDF文件第3页浏览型号SSM2301CPZ-REEL7的Datasheet PDF文件第4页浏览型号SSM2301CPZ-REEL7的Datasheet PDF文件第5页浏览型号SSM2301CPZ-REEL7的Datasheet PDF文件第6页浏览型号SSM2301CPZ-REEL7的Datasheet PDF文件第7页 
Filterless High Efficiency  
Mono 1.4 W Class-D Audio Amplifier  
SSM2301  
The SSM2301 operates with 85% efficiency at 1.4 W into 8 Ω  
from a 5.0 V supply and has a signal-to-noise ratio (SNR) that  
is greater than 98 dB. Spread-spectrum modulation is used to  
provide lower EMI-radiated emissions compared with other  
Class-D architectures.  
FEATURES  
Filterless Class-D amplifier with Σ-Δ modulation  
No sync necessary when using multiple Class-D amplifiers  
from Analog Devices, Inc.  
1.4 W into 8 Ω at 5.0 V supply with less than 1% THD + N  
85% efficiency at 5.0 V, 1.4 W into 8 Ω speaker  
Greater than 98 dB SNR (signal-to-noise ratio)  
Single-supply operation from 2.5 V to 5.0 V  
20 nA ultralow shutdown current  
The SSM2301 has a micropower shutdown mode with a maximum  
shutdown current of 30 nA. Shutdown is enabled by applying  
SD  
a logic low to the  
pin.  
Short-circuit and thermal protection  
Available in 8-lead, 3 mm × 3 mm LFCSP and MSOP packages  
Pop-and-click suppression  
Built-in resistors reduce board component count  
Fixed and user-adjustable gain configurations  
The device also includes pop-and-click suppression circuitry.  
This minimizes voltage glitches at the output during turn-on  
and turn-off, thus reducing audible noise on activation and  
deactivation.  
The fully differential input of the SSM2301 provides excellent  
rejection of common-mode noise on the input. Input coupling  
capacitors can be omitted if the dc input common-mode voltage  
is approximately VDD/2.  
APPLICATIONS  
Mobile phones  
MP3 players  
Portable gaming  
Portable electronics  
Educational toys  
The SSM2301 also has excellent rejection of power supply noise,  
including noise caused by GSM transmission bursts and RF  
rectification. PSRR is typically 63 dB at 217 Hz.  
GENERAL DESCRIPTION  
The SSM2301 is a fully integrated, high efficiency, Class-D audio  
amplifier designed to maximize performance for mobile phone  
applications. The application circuit requires a minimum of  
external components and operates from a single 2.5 V to 5.0 V  
supply. It is capable of delivering 1.4 W of continuous output  
power with less than 1% THD + N driving an 8 Ω load from  
a 5.0 V supply.  
The gain can be set to 6 dB or 12 dB by utilizing the gain control  
select pin connected respectively to ground or to VDD. Gain  
can also be adjusted externally by inserting a resistor in series  
with each input pin.  
The SSM2301 is specified over the commercial temperature range  
(−40°C to +85°C). It has built-in thermal shutdown and output  
short-circuit protection. It is available in both an 8-lead, 3 mm ×  
3 mm lead-frame chip scale package (LFCSP) and an 8-lead  
MSOP package.  
The SSM2301 features a high efficiency, low noise modulation  
scheme that does not require external LC output filters. The modu-  
lation provides high efficiency even at low output power.  
FUNCTIONAL BLOCK DIAGRAM  
VBATT  
2.5V TO 5.0V  
10µF  
0.1µF  
VDD  
SSM2301  
IN+  
1
0.01µF  
OUT+  
OUT–  
AUDIO IN+  
GAIN  
FET  
MODULATOR  
CONTROL  
IN–  
DRIVER  
AUDIO IN–  
1
0.01µF  
GAIN  
SD  
POP/CLICK  
BIAS  
OSCILLATOR  
SHUTDOWN  
SUPPRESSION  
GND  
NOTES  
1
INPUT CAPS ARE OPTIONAL IF INPUT DC COMMON-MODE  
VOLTAGE IS APPROXIMATELY V /2.  
DD  
Figure 1.  
Rev. A  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2007 Analog Devices, Inc. All rights reserved.  
 

SSM2301CPZ-REEL7 替代型号

型号 品牌 替代类型 描述 数据表
SSM2301CPZ-REEL ADI

完全替代

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2301CPZ-R2 ADI

完全替代

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2305CPZ-R2 ADI

类似代替

Filterless High Efficiency Mono 2.8 W Class-D Audio Amplifier

与SSM2301CPZ-REEL7相关器件

型号 品牌 获取价格 描述 数据表
SSM2301-EVALZ ADI

获取价格

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2301N SSC

获取价格

P-CHANNEL ENHANCEMENT-MODE POWER MOSFET
SSM2301RMZ ADI

获取价格

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2301RMZ-R2 ADI

获取价格

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2301RMZ-REEL ADI

获取价格

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2301RMZ-REEL7 ADI

获取价格

Filterless High Efficiency Mono 1.4W Class-D Audio Amplifier
SSM2302 ADI

获取价格

Filterless High Efficiency Class-D Stereo Audio Amplifier
SSM2302CPZ-R2 ADI

获取价格

Filterless High Efficiency Class-D Stereo Audio Amplifier
SSM2302CPZ-REEL ADI

获取价格

Filterless High Efficiency Class-D Stereo Audio Amplifier
SSM2302CPZ-REEL7 ADI

获取价格

Filterless High Efficiency Class-D Stereo Audio Amplifier