Datasheet > NX5P3001UKZ

NX5P3001UKZ

更新时间： 2024-09-15 20:00:15

品牌	Logo	应用领域
恩智浦 - NXP		/
页数	文件大小	规格书
20页	281K
描述
NX5P3001 - Bidirectional high-side power switch for charger and USB‑OTG combined applications

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

NX5P3001UKZ 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	compliant	风险等级：	1.68
Base Number Matches：	1

NX5P3001UKZ 数据手册

NX5P3001

Bidirectional high-side power switch for charger and

USB-OTG combined applications

Rev. 1 — 11 September 2013

Product data sheet

1. General description

The NX5P3001 is an advanced bidirectional power switch and ESD-protection device for

combined USB-OTG and charger port applications. It includes undervoltage lockout,

overvoltage lockout and overtemperature protection circuits designed to automatically

isolate the power switch terminals when a fault condition occurs.

The device features two power switch input/output terminals (VBUSI and VBUSO), an

open-drain acknowledge output (ACK), an enable input which includes logic level

translation (EN) and low capacitance Transient Voltage Suppression (TVS) type

ESD-clamps for USB data and ID pins.

When EN is set HIGH the device enters a low-power mode, disabling all protection

circuits. When used in combined charger and USB-OTG applications the 30 V tolerant

VBUSI switch terminal is used as the supply and switch input when charging, for

USB-OTG the VBUSO switch terminal is used as the supply and switch input.

Designed for operation from 3.2 V to 6.35 V, it is used in battery charging and power

domain isolation applications to reduce power dissipation and extend battery life.

2. Features and benefits

 30 V tolerant VBUSI supply pin

 Wide supply voltage range from 3.2 V to 6.35 V

 Automatic switch operation for charging within the supply range

 I_SWmaximum 3 A continuous current

 Low ON resistance: 62 m (typical) at a supply voltage of 5.0 V

 1.8 V control logic input to open the switch

 Soft start turn-on slew rate

 Protection circuitry

 Overtemperature protection

 Overvoltage lockout

 Undervoltage lockout

 ESD protection:

 HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV

 CDM AEC standard Q100-01 (JESD22-C101E)

 IEC61000-4-2 contact discharge exceeds 8 kV for pins VBUSI, D, D+ and ID

 Specified from 40 C to +85 C

12 3 4 5 6 7...20

中文翻译

下载PDF

与NX5P3001UKZ相关器件

型号	品牌	获取价格	描述	数据表
NX5P3090	NXP	获取价格	USB PD and type C current-limited power switch
NX5P3090UK	NXP	获取价格	USB PD and type C current-limited power switch
NX5P3290UK	NXP	获取价格	USB PD and Type-C Current-Limited Power Switch
NX5P3363UK	NXP	获取价格	Adjustable Current-Limited Power Switch for USB PD Application
NX6	ETC	获取价格	P CLIP BLACK PACK 100 Inhalt pro Packung: 100 Stk.
NX6008NBK	NEXPERIA	获取价格	60 V, N-channel Trench MOSFETProduction
NX6008NBKS	NEXPERIA	获取价格	60 V, dual N-channel Trench MOSFETProduction
NX6008NBKW	NEXPERIA	获取价格	60 V, N-channel Trench MOSFETProduction
NX6020CAKS	NEXPERIA	获取价格	60 V / 50 V, 170 mA / 160 mA N/P-channel Trench MOSFETProduction
NX6035SA	NDK	获取价格	Crystal Units For Mobile Communications