MGFS80
GENERAL SPECIFICATIONS
INPUT-OUTPUT
ISOLATION INPUT-CASE
OUTPUT-CASE
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 5,000m (16,400feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 98.0m/s (10G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
490.3m/s (50G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL62368-1, C-UL(CSA62368-1), EN62368-1
25.4X9.9X50.8mm (WXHXD) / 50g max
Convection/Forced air
*1 MGFW80xx12/MGFW80xx15 is available as single output +24V/+30V
*2 Rated input voltage (DC24V, DC48V) Io=100%
*3 Riple and Ripple Noise is measured by using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope)
*4 Drift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C
*5 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C
*
Parallel operation with other model is not possible.
External view
Name Plate
¶Recommended Pad and Hole dia.
(TOP VIEW)
6-f1.5
Case
Bottom Cover
0.1
f1
¶Unit : 0.1inch
¶Dimension : mm
¶ Tolerance 0.5 [ 0.02]
¶ Dimensions in mm, [ ]=inches
¶ Pin terminal material : Copper
+Vout
+Vin
-Vin
¶ Plating treatment of terminal : Lead free plating
¶ Case material : Brass
-Vout
TRM
¶ Plating treatment of case : Nickel plating
¶ Bottom Cover : FR4 (t=0.6) [t=0.024]
¶ Please keep enough creepage distance with the
pattern on PCB and other components.
¶ Weight 50g max
RC
45.72
[1.8]
50.8
[2.0]
MG-41