PD -2.515 rev. A 02/99
HFA210NJ60D
Ultrafast,SoftRecoveryDiode
HEXFREDTM
Anode
1
Cathode
VR = 600V
Features
Reduced RFI and EMI
Reduced Snubbing
Extensive Characterization of
Recovery Parameters
2
VF(typ.) = 1.2V
IF(AV) = 210A
Qrr (typ.) = 450nC
IRRM(typ.)= 10A
trr(typ.)= 35ns
di(rec)M/dt (typ.) = 240A/µs
Base AC
Description
HEXFREDTM diodes are optimized to reduce losses and EMI/RFI in high frequency
power conditioning systems. An extensive characterization of the recovery
behavior for different values of current, temperature and di/dt simplifies the
calculations of losses in the operating conditions. The softness of the recovery
eliminates the need for a snubber in most applications. These devices are ideally
suited for power converters, motors drives and other applications where
switching losses are significant portion of the total losses.
TO-244AB
Absolute Maximum Ratings (per Leg)
Parameter
Max.
Units
VR
Cathode-to-Anode Voltage
Continuous Forward Current
Continuous Forward Current
Single Pulse Forward Current
Non-Repetitive Avalanche Energy
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
600
171
85
V
IF @ TC = 25°C
IF @ TC = 100°C
IFSM
A
600
220
463
185
EAS
µJ
W
PD @ TC = 25°C
PD @ TC = 100°C
TJ
-55 to +150
C
TSTG
Storage Temperature Range
Thermal - Mechanical Characteristics
Parameter
Min.
Typ.
0.10
Max.
0.34
Units
RthJC
Junction-to-Case, Single Leg Conducting
Junction-to-Case, Both Legs Conducting
Case-to-Sink, Flat, Greased Surface
Weight
°C/W
K/W
0.17
RthCS
Wt
40 (4.6)
18 (2.1)
40 (4.6)
80
79 (2.8)
g (oz)
Mounting Torque
30 (3.4)
12 (1.4)
30 (3.4)
lbfin
(Nm)
Mounting Torque Center Hole
TerminalTorque
Vertical Pull
lbfin
2 inch Lever Pull
35
Note: Limited by junction temperature
L = 100µH, duty cycle limited by max TJ
125°C
Mounting surface must be smooth, flat, free or burrs or other
protrusions. Apply a thin even film or thermal grease to mounting
surface. Gradually tighten each mounting bolt in 5-10 lbfin steps
until desired or maximum torque limits are reached. Module
1