ESD9101
ESD Protection Diode
Low Capacitance ESD Protection Diodes
for High Speed Data Lines
The ESD9101 is designed to protect a single high speed data line
from ESD. Ultra−low capacitance and low ESD clamping voltage via
SCR technology make this device an ideal solution for protecting
voltage sensitive high speed data lines. The SOD−923 mico−package
allows for easy PCB layout and the ability to be placed in space
constrained applications where board area comes at a premium.
www.onsemi.com
MARKING
DIAGRAM
SOD−923
CASE 514AB
Features
X M
• Low Capacitance (0.5 pF Max, I/O to GND)
• Protection for the Following Standards:
IEC 61000−4−2 (Level 4) & ISO 10605
• Low ESD Clamping Voltage
XX = Specific Device Code
M
G
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
PIN CONFIGURATIONS
AND SCHEMATICS
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Cathode
Typical Applications
• USB 3.0/3.1
• HDMI 1.3/1.4/2.0
• DisplayPort
• GPS Antenna
Anode
Pin 1
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
J
Rating
Symbol
Value
−55 to +150
−55 to +150
260
Unit
°C
Operating Junction Temperature Range
Storage Temperature Range
T
J
T
stg
°C
Lead Solder Temperature −
Maximum (10 Seconds)
T
L
°C
Pins 2
IEC 61000−4−2 Contact
IEC 61000−4−2 Air
ISO 10605 150 pF/2 kW
ISO 10605 330 pF/2 kW
ISO 10605 330 pF/330 W
ESD
25
25
30
30
20
kV
=
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
See Application Note AND8308/D for further description of
survivability specs.
ORDERING INFORMATION
See detailed ordering and shipping information on page 6 of
this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
May, 2017 − Rev. 0
ESD9101/D