ESD7272
ESD Protection Diodes, Low
Capacitance, Dual Channel
The ESD7272 is designed to protect various IOs and data lines from
ESD. The low capacitance and low ESD clamping voltage combined
with a high standoff voltage makes this device an ideal solution for
protecting various types of ICs without causing signal degradation.
The small, cost efficient SOT−23 package allows for easy PCB layout
and BOM reduction on multiple pin modules.
www.onsemi.com
MARKING
DIAGRAM
Features
• Low Capacitance: < 3.0 pF
• Protection for the Following IEC & ISO Standards:
♦ IEC 61000−4−2 (Level 4)
♦ ISO 10605
SOT−23
CASE 318
27L MG
G
1
• Low ESD Clamping Voltage
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
27L
M
G
= Specific Device Code
= Date Code
= Pb−Free Package
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
PIN CONFIGURATIONS
AND SCHEMATICS
Pin 1
Pin 2
Typical Applications
• Sensor Lines
• PWM Inputs/Outputs
• General I/Os
• Automotive
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
A
Rating
Symbol
Value
Unit
Pin 3
IEC 61000−4−2 Contact
IEC 61000−4−2 Air
ISO 10605 330 pF / 330 W Contact
ISO 10605 330 pF / 2 kW Contact
ISO 10605 150 pF / 2 kW Contact
ESD
15
15
12
25
30
kV
=
Operating Junction Temperature Range
Storage Temperature Range
T
−55 to +175
−55 to +175
260
°C
°C
°C
J(max)
T
stg
Lead Solder Temperature − Maximum
(10 Second Duration)
T
L
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 5 of this data sheet.
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
April, 2019 − Rev. 0
ESD7272/D