Datasheet > DS26502_06

DS26502_06

更新时间： 2024-01-04 13:10:14

品牌	Logo	应用领域
达拉斯 - DALLAS		/
页数	文件大小	规格书
125页	1095K
描述
T1/E1/J1/64KCC BITS Element

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DS26502_06 数据手册

DS26502

T1/E1/J1/64KCC BITS Element

www.maxim-ic.com

GENERAL DESCRIPTION

FEATURES

The DS26502 is a building-integrated timing- ꢀ G.703 2048kHz Synchronization Interface

supply (BITS) clock-recovery element. It also Compliant

functions as a basic T1/E1 transceiver. The ꢀ G.703 64kHz Centralized (Option A) and

receiver portion can recover a clock from T1, Codirectional Timing Interface Compliant

E1, 64kHz composite clock (64KCC), and ꢀ G.703 Appendix II 64kHz and 6312kHz

6312kHz synchronization timing interfaces. In

T1 and E1 modes, the Synchronization Status

Japanese Synchronization Interface

Compliant

Message (SSM) can also be recovered. The ꢀ Interfaces to Standard T1/J1 (1.544MHz) and

transmit portion can directly interface to T1, E1, E1 (2.048MHz)

or 64KCC synchronization interfaces as well as ꢀ Interface to CMI-Coded T1/J1 and E1

source the SSM in T1 and E1 modes. The ꢀ Short- and Long-Haul Line Interface

DS26502 can translate between any of the ꢀ Transmit and Receive T1 and E1 SSM

supported inbound synchronization clock rates to

Messages with Message Validation

any supported outbound rate. A separate output ꢀ T1/E1 Jitter Attenuator with Bypass Mode

is provided to source a 6312kHz clock. The ꢀ Fully Independent Transmit and Receive

device is controlled through a parallel, serial, or

hardware controller port.

Functionality

ꢀ

Internal Software-Selectable Receive- and

Transmit-Side Termination for

75Ω/100Ω/110Ω/120Ω T1, E1, and

Composite Clock Interfaces

Monitor Mode for Bridging Applications

Accepts 16.384MHz, 12.8MHz, 8.192MHz,

4.096MHz, 2.048MHz, or 1.544MHz Master

Clock

APPLICATIONS

BITS Timing

Rate Conversion

ꢀ

64kHz, 8kHz, and 400Hz Outputs in

Composite Clock Mode

8-Bit Parallel Control Port, Multiplexed or

Nonmultiplexed, Intel or Motorola

Serial (SPI) Control Port

ORDERING INFORMATION

PART

TEMP RANGE PIN-PACKAGE

0°C to +70°C 64 LQFP

DS26502L

ꢀ

DS26502LN -40°C to +85°C 64 LQFP

Hardware Control Mode

Provides LOS, AIS, and LOF Indications

Through Hardware Output Pins

Fast Transmitter-Output Disable Through

Device Pin for Protection Switching

IEEE 1149.1 JTAG Boundary Scan

3.3V Supply with 5V Tolerant Inputs and

Outputs

ꢀ

Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device

may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.

1 of 125

REV: 053107

12 3 4 5 6 7...125

中文翻译

下载PDF

与DS26502_06相关器件

型号	品牌	获取价格	描述	数据表
DS26502L	DALLAS	获取价格	T1/E1/J1/64KCC BITS Element
DS26502L	MAXIM	获取价格	T1/E1/J1/64KCC BITS Element
DS26502LN	MAXIM	获取价格	T1/E1/J1/64KCC BITS Element
DS26502LN	DALLAS	获取价格	T1/E1/J1/64KCC BITS Element
DS26502LN+	MAXIM	获取价格	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64
DS26502LN+T	MAXIM	获取价格	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64
DS26503	DALLAS	获取价格	T1/E1/J1 BITS Element
DS26503	MAXIM	获取价格	T1/E1/J1/64KCC BITS Element
DS26503	ADI	获取价格	T1/E1/J1 BITS单元
DS26503_07	MAXIM	获取价格	T1/E1/J1 BITS Element

与DS26502_06相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

11
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

14
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

8
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

12

产品中心

服务支持

精选活动

关于我们

帮助中心

DS26502_06

DS26502_06 数据手册

与DS26502_06相关器件

与DS26502_06相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS26502_06

DS26502_06 数据手册

与DS26502_06相关器件

与DS26502_06相关文章

您还可以找

您在本页遇到什么问题？