Datasheet > DS26503_07

DS26503_07

更新时间： 2024-11-23 04:15:11

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
122页	3865K
描述
T1/E1/J1 BITS Element

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DS26503_07 数据手册

DESIGN KIT AVAILABLE

DS26503

T1/E1/J1 BITS Element

www.maxim-ic.com

GENERAL DESCRIPTION

FEATURES

The DS26503 is a building-integrated timing- ꢀ G.703 2048kHz Synchronization Interface

supply (BITS) clock-recovery element. It also Compliant

functions as a basic T1/E1 transceiver. The ꢀ G.703 6312kHz Japanese Synchronization

receiver portion can recover a clock from T1, Interface Compliant

E1, and 6312kHz synchronization timing ꢀ Interfaces to Standard T1/J1 (1.544MHz) and

interfaces. In T1 and E1 modes, the E1 (2.048MHz)

Synchronization Status Message (SSM) can also ꢀ Interface to CMI-Coded T1/J1 and E1

be recovered. The transmit portion can directly ꢀ Short- and Long-Haul Line Interface

interface to T1 or E1 interfaces as well as source ꢀ Transmit and Receive T1 and E1 SSM

the SSM in T1 and E1 modes. The DS26503 can

Messages with Message Validation

translate between any of the supported inbound ꢀ T1/E1 Jitter Attenuator with Bypass Mode

synchronization clock rates to any supported ꢀ Fully Independent Transmit and Receive

outbound rate. A separate output is provided to

source a 6312kHz clock. The device is ꢀ Internal Software-Selectable Receive- and

Functionality

controlled through a parallel, serial, or hardware

controller port.

Transmit-Side Termination for

75Ω/100Ω/110Ω/120Ω

ꢀ

Monitor Mode for Bridging Applications

Accepts 16.384MHz, 12.8MHz, 8.192MHz,

4.096MHz, 2.048MHz, or 1.544MHz Master

Clock

APPLICATIONS

BITS Timing

Rate Conversion

Basic Transceiver

ꢀ

8-Bit Parallel Control Port, Multiplexed or

Nonmultiplexed, Intel or Motorola

Serial (SPI) Control Port

ꢀ

Hardware Control Mode

Provides LOS, AIS, and LOF Indications

Through Hardware Output Pins

Fast Transmitter-Output Disable Through

Device Pin for Protection Switching

IEEE 1149.1 JTAG Boundary Scan

3.3V Supply with 5V-Tolerant Inputs and

Outputs

ORDERING INFORMATION

PART

TEMP RANGE PIN-PACKAGE

0°C to +70°C 64 LQFP

ꢀ

DS26503L

ꢀ

DS26503LN -40°C to +85°C 64 LQFP

Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device

may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.

1 of 122

REV: 100507

12 3 4 5 6 7...122

中文翻译

下载PDF

与DS26503_07相关器件

型号	品牌	获取价格	描述	数据表
DS26503L	DALLAS	获取价格	T1/E1/J1 BITS Element
DS26503L	MAXIM	获取价格	T1/E1/J1 BITS Element
DS26503L+	MAXIM	获取价格	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64
DS26503LN	DALLAS	获取价格	T1/E1/J1 BITS Element
DS26503LN	MAXIM	获取价格	T1/E1/J1 BITS Element
DS26503LN+	MAXIM	获取价格	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64
DS26504	MAXIM	获取价格	T1/E1/J1/64KCC BITS Element
DS26504_06	MAXIM	获取价格	T1/E1/J1/64KCC BITS Element
DS26504L	MAXIM	获取价格	T1/E1/J1/64KCC BITS Element
DS26504L+	MAXIM	获取价格	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64