DS26504LN+

更新时间： 2024-11-26 13:07:27

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
128页	1175K
描述
Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

DS26504LN+ 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	QFP
包装说明：	10 X 10 MM, 1.40 MM HEIGHT, LQFP-64	针数：	64
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.74
运营商类型：	CEPT PCM-30/E-1	运营商类型（2）：	T-1(DS1)
JESD-30 代码：	S-PQFP-G64	JESD-609代码：	e3
长度：	10 mm	湿度敏感等级：	3
功能数量：	1	端子数量：	64
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	LFQFP
封装等效代码：	QFP64,.47SQ,20	封装形状：	SQUARE
封装形式：	FLATPACK, LOW PROFILE, FINE PITCH	峰值回流温度（摄氏度）：	260
电源：	3.3 V	认证状态：	Not Qualified
座面最大高度：	1.6 mm	子类别：	Other Telecom ICs
最大压摆率：	0.15 mA	标称供电电压：	3.3 V
表面贴装：	YES	电信集成电路类型：	FRAMER
温度等级：	INDUSTRIAL	端子面层：	Matte Tin (Sn)
端子形式：	GULL WING	端子节距：	0.5 mm
端子位置：	QUAD	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	10 mm	Base Number Matches：	1

DS26504LN+ 数据手册

DS26504

T1/E1/J1/64KCC BITS Element

www.maxim-ic.com

Cꢀ Transmit and Receive T1 BOC SSM Messages

with Receive Message Change of State and

Validation Indication

GENERAL DESCRIPTION

The DS26504 is a building-integrated timing-supply

(BITS) clock-recovery element. It also functions as a

basic T1/E1 transceiver. The receiver portion can

recover a clock from T1, E1, 64kHz composite clock

(64KCC), and 6312kHz synchronization timing

interfaces. In T1 and E1 modes, the Synchronization

Status Message (SSM) can also be recovered. The

transmit portion can directly interface to T1, E1, or

64KCC synchronization interfaces as well as source

the SSM in T1 and E1 modes. The DS26504 can

translate between any of the supported inbound

synchronization clock rates to any supported

outbound rate. The DS26504 can also accept an 8kHz

as well as a 19.44MHz reference clock. A separate

output is provided to source a 6312kHz clock. The

device is controlled through a parallel, serial, or

hardware controller port.

Cꢀ Transmit and Receive E1 Sa(n) Bit SSM

Messages with Receive Message Change of State

Indication

Cꢀ Crystal-Less Jitter Attenuator with Bypass Mode

for T1 and E1 Operation

Cꢀ Fully Independent Transmit and Receive

Functionality

Cꢀ Internal Software-Selectable Receive and

Transmit Side Termination for

75Ω/100Ω/110Ω/120Ω/133Ω

Cꢀ Monitor Mode for Bridging Applications

Cꢀ Accepts 16.384MHz, 12.8MHz, 8.192MHz,

4.096MHz, 2.048MHz, or 1.544MHz Master

Clock

Cꢀ 64kHz, 8kHz, and 400Hz Outputs in Composite

Clock Mode

Cꢀ 8-Bit Parallel Control Port, Multiplexed or

Nonmultiplexed, Intel or Motorola

Cꢀ Serial (SPI) Control Port and Hardware Control

Mode

APPLICATIONS

BITS Timing

Rate Conversion

Cꢀ Provides LOS, AIS, and LOF Indications through

Hardware Output Pins

FEATURES

Cꢀ Fast Transmitter Output Disable through Device

Pin for Protection Switching

Cꢀ Accepts 8kHz and 19.44MHz References in

Addition to T1, E1, and 64kHz Composite Clock

Cꢀ GR378 Composite Clock Compliant

Cꢀ G.703 2048kHz Synchronization Interface

Compliant

Cꢀ IEEE 1149.1 JTAG Boundary Scan

Cꢀ 3.3V Supply with 5V Tolerant Inputs and

Outputs

Cꢀ Pin and Software Compatible with the DS26502

and DS26503

Cꢀ G.703 64kHz Option A & B Centralized Clock

Synchronization Interface Compliant

Cꢀ G.703 64kHz Japanese Composite Clock

Synchronization Interface Compliant

Cꢀ G.703 6312kHz Japanese Synchronization

Interface Compliant

ORDERING INFORMATION

PART

TEMP RANGE PIN-PACKAGE

Cꢀ Interfaces to Standard T1/J1 (1.544MHz) and E1

(2.048MHz)

DS26504L

0°C to +70°C

64 LQFP

Cꢀ Interface to CMI-Coded T1/J1 and E1

Cꢀ T1/E1 Transmit Payload Clock Output

Cꢀ Short- and Long-Haul Line Interface

DS26504LN -40°C to +85°C 64 LQFP

Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device

may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.

1 of 128

REV: 070105

12 3 4 5 6 7...128

中文翻译

下载PDF

DS26504LN+ 替代型号

型号	品牌	替代类型	描述	数据表
DS26504L+	MAXIM	完全替代	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64
DS26503LN+	MAXIM	类似代替	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64
DS26502LN+	MAXIM	功能相似	Framer, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, LQFP-64

与DS26504LN+相关器件

型号	品牌	获取价格	描述	数据表
DS26504LN+T&R	MAXIM	获取价格	Framer,
DS26504LNB2+	MAXIM	获取价格	Framer,
DS2650D5S	MTU	获取价格	DIESEL GENERATOR SET
DS26514	MAXIM	获取价格	4-Port T1/E1/J1 Transceiver Fully Internal Impedance Match, No External Resistor
DS26514_11	MAXIM	获取价格	4-Port T1/E1/J1 Transceiver Fully Internal Impedance Match, No External Resistor
DS26514DK	MAXIM	获取价格	Framer,
DS26514G	MAXIM	获取价格	Framer, PBGA256, 17 X 17 MM, 1 MM PITCH, HSBGA-256
DS26514G+	MAXIM	获取价格	Framer, PBGA256, 17 X 17 MM, 1 MM PITCH, ROHS COMPLIANT, HSBGA-256
DS26514GN	MAXIM	获取价格	4-Port T1/E1/J1 Transceiver
DS26514GN+	MAXIM	获取价格	4-Port T1/E1/J1 Transceiver

与DS26504LN+相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

45
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

34
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

62
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

59

产品中心

服务支持

精选活动

关于我们

帮助中心

DS26504LN+

DS26504LN+ 技术参数

DS26504LN+ 数据手册

DS26504LN+ 替代型号

与DS26504LN+相关器件

与DS26504LN+相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS26504LN+

DS26504LN+ 技术参数

DS26504LN+ 数据手册

DS26504LN+ 替代型号

与DS26504LN+相关器件

与DS26504LN+相关文章

您还可以找

您在本页遇到什么问题？