5秒后页面跳转
DM74LS670MX PDF预览

DM74LS670MX

更新时间: 2024-11-27 23:47:39
品牌 Logo 应用领域
飞兆/仙童 - FAIRCHILD /
页数 文件大小 规格书
6页 69K
描述
Register File

DM74LS670MX 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:SOIC包装说明:SOP, SOP16,.25
针数:16Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8542.32.00.41
风险等级:5.52最长访问时间:55 ns
JESD-30 代码:R-PDSO-G16JESD-609代码:e0
长度:9.9 mm内存密度:16 bit
内存集成电路类型:STANDARD SRAM内存宽度:4
功能数量:1端子数量:16
字数:4 words字数代码:4
工作模式:ASYNCHRONOUS最高工作温度:70 °C
最低工作温度:组织:4X4
封装主体材料:PLASTIC/EPOXY封装代码:SOP
封装等效代码:SOP16,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE并行/串行:PARALLEL
峰值回流温度(摄氏度):NOT SPECIFIED电源:5 V
认证状态:Not Qualified座面最大高度:1.75 mm
子类别:Other Memory ICs最大供电电压 (Vsup):5.25 V
最小供电电压 (Vsup):4.75 V标称供电电压 (Vsup):5 V
表面贴装:YES技术:CMOS
温度等级:COMMERCIAL端子面层:Tin/Lead (Sn/Pb)
端子形式:GULL WING端子节距:1.27 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:3.9 mmBase Number Matches:1

DM74LS670MX 数据手册

 浏览型号DM74LS670MX的Datasheet PDF文件第2页浏览型号DM74LS670MX的Datasheet PDF文件第3页浏览型号DM74LS670MX的Datasheet PDF文件第4页浏览型号DM74LS670MX的Datasheet PDF文件第5页浏览型号DM74LS670MX的Datasheet PDF文件第6页 
August 1986  
Revised March 2000  
DM74LS670  
3-STATE 4-by-4 Register File  
nates recovery times, permits simultaneous reading and  
writing, and is limited in speed only by the write time (27 ns  
typical) and the read time (24 ns typical). The register file  
has a non-volatile readout in that data is not lost when  
addressed.  
General Description  
These register files are organized as 4 words of 4 bits  
each, and separate on-chip decoding is provided for  
addressing the four word locations to either write-in or  
retrieve data. This permits writing into one location, and  
reading from another word location, simultaneously.  
All inputs (except read enable and write enable) are buff-  
ered to lower the drive requirements to one normal Series  
DM74LS load, and input clamping diodes minimize switch-  
ing transients to simplify system design. High speed, dou-  
ble ended AND-OR-INVERT gates are employed for the  
read-address function and have high sink current, 3-STATE  
outputs. Up to 128 of these outputs may be wire-AND con-  
nected for increasing the capacity up to 512 words. Any  
number of these registers may be paralleled to provide n-  
bit word length.  
Four data inputs are available to supply the word to be  
stored. Location of the word is determined by the write  
select inputs A and B, in conjunction with a write-enable  
signal. Data applied at the inputs should be in its true form.  
That is, if a high level signal is desired from the output, a  
high level is applied at the data input for that particular bit  
location. The latch inputs are arranged so that new data  
will be accepted only if both internal address gate inputs  
are HIGH. When this condition exists, data at the D input is  
transferred to the latch output. When the write-enable  
input, GW, is HIGH, the data inputs are inhibited and their  
Features  
For use as:  
levels can cause no change in the information stored in the  
internal latches. When the read-enable input, GR, is HIGH,  
Scratch pad memory  
the data outputs are inhibited and go into the high imped-  
ance state.  
Buffer storage between processors  
Bit storage in fast multiplication designs  
The individual address lines permit direct acquisition of  
data stored in any four of the latches. Four individual  
decoding gates are used to complete the address for read-  
ing a word. When the read address is made in conjunction  
with the read-enable signal, the word appears at the four  
outputs.  
Separate read/write addressing permits simultaneous  
reading and writing  
Organized as 4 words of 4 bits  
Expandable to 512 words of n-bits  
3-STATE versions of DM74LS170  
Fast access times 20 ns typ  
This arrangement—data entry addressing separate from  
data read addressing and individual sense line — elimi-  
Ordering Code:  
Order Number Package Number  
Package Description  
DM74LS670M  
DM74LS670N  
M16A  
N16E  
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow  
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide  
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.  
© 2000 Fairchild Semiconductor Corporation  
DS006436  
www.fairchildsemi.com  

与DM74LS670MX相关器件

型号 品牌 获取价格 描述 数据表
DM74LS670N FAIRCHILD

获取价格

3-STATE 4-by-4 Register File
DM74LS670N/A+ ETC

获取价格

Register File
DM74LS670N/B+ ETC

获取价格

Register File
DM74LS73A FAIRCHILD

获取价格

Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flops with Clear and Complementary Outp
DM74LS73A NSC

获取价格

DUAL NEGATIVE-EDGE-TRIGGERED MASTER-SLAVE J-K FLIP-FLOPS WITH CLEAR AND COMPLEMENTARY OUTP
DM74LS73AM FAIRCHILD

获取价格

Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flops with Clear and Complementary Outp
DM74LS73AM NSC

获取价格

DUAL NEGATIVE-EDGE-TRIGGERED MASTER-SLAVE J-K FLIP-FLOPS WITH CLEAR AND COMPLEMENTARY OUTP
DM74LS73AMX FAIRCHILD

获取价格

J-K-Type Flip-Flop
DM74LS73AN NSC

获取价格

DUAL NEGATIVE-EDGE-TRIGGERED MASTER-SLAVE J-K FLIP-FLOPS WITH CLEAR AND COMPLEMENTARY OUTP
DM74LS73AN FAIRCHILD

获取价格

Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flops with Clear and Complementary Outp