PRoC™ BLE II: CYBLxxxxx
Family Datasheet
ADVANCE
Programmable Radio-on-Chip With
Bluetooth Low Energy (PRoC™ BLE)
General Description
PRoC™ BLE II is Cypress's second-generation 32-bit, 48-MHz ARM® Cortex™-M0 BLE solution with CapSense®, 12-bit ADC, four
timer, counter, pulse-width modulators (TCPWM), thirty-four GPIOs, two serial communication blocks (SCBs), LCD, and I2S.
PRoC™ BLE II includes a royalty-free BLE stack compatible with Bluetooth® 4.2 and provides a complete, programmable, and flexible
solution for HID, remote controls, toys, beacons, and wireless chargers. In addition to these applications, PRoC™ BLE II provides a
simple, low-cost way to add BLE connectivity to any system.
Features
®
■ Programmable LVD from 1.8 V to 4.5 V
■ I2S Master interface
Bluetooth Smart Connectivity
■ Bluetooth 4.2 single-mode device
■ 2.4-GHz BLE radio and baseband with integrated balun
■ TX output power: –20 dBm to +4 dBm
Clock, Reset, and Supply
■ Wide supply-voltage range: 1.71 V to 5.5 V
■ Integrated DC-DC buck regulator
■ Received signal strength indicator (RSSI) with 1-dB resolution,
± 4-dB accuracy
■ 3-MHz to 48-MHz internal main oscillator (IMO) with 2%
accuracy
■ RX sensitivity: –95 dBm at 1 Mbps
■ TX current: 3.6 mA at 0 dBm
■ RX current: 3.6 mA at 1 Mbps
■ 16-MHz / 32-MHz external clock oscillator (ECO) without load
capacitance
■ 32.768-kHz WCO
ARM Cortex-M0 CPU Core
■ 32-kHz internal low-speed oscillator (ILO)
■ 32.768-kHz internal 250-ppm RC oscillator (RCOSC)
■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
multiply, operating at up to 48 MHz
■ 256-KB flash memory
Programmable GPIOs
■ 34 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z, or strong output
■ 32-KB SRAM memory
■ Emulated EEPROM using flash memory
■ Watchdog timer with dedicated internal low-speed oscillator
(ILO)
■ Any GPIO pin can be CapSense, LCD, or analog, with flexible
pin routing
■ Eight-channel direct memory access (DMA) controller
Programming and Debug
■ Two-pin SWD
Ultra-Low-Power
■ 1.6-µA Deep-Sleep mode with watch crystal oscillator (WCO)
on
■ In-system flash programming support
Temperature and Packaging
■ Operating temperature range: –40 °C to +85 °C and –40 °C to
+105 °C
■ 150-nA Hibernate mode current with SRAM retention
■ 60-nA Stop mode current with GPIO wakeup
®
CapSense Touch Sensing with Two-Finger Gestures
■ Available in 56-pin QFN (7 mm × 7 mm) package
■ Up to 34 capacitive sensors for buttons, sliders, and touchpads
®
PSoC Creator™ Design Environment
■ Two-finger gestures: scroll, inertial scroll, pinch, stretch, and
edge-swipe
■ Easy-to-use IDE to configure, develop, program, and test a
BLE application
■ Cypress Capacitive Sigma-Delta (CSD) provides best-in-class
SNR (> 5:1) and liquid tolerance
■ Option to export the design to Keil, IAR, or Eclipse
■ Automatic hardware-tuning algorithm (SmartSense™)
Bluetooth Low Energy Protocol Stack
■ Supports all Bluetooth 4.0, 4.1, and 4.2 features
Peripherals
■ 12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer
■ Ultra-low-power LCD segment drive for 128 segments with
■ Bluetooth Low Energy protocol stack supporting generic
access profile (GAP) Central, Peripheral, Observer, or
Broadcaster roles
operation in Deep-Sleep mode
■ Two serial communication blocks (SCBs) supporting I2C
❐ Switches between Central and Peripheral roles on-the-go
■ Standard Bluetooth Low Energy profiles and services for
(Master/Slave), SPI (Master/Slave), or UART
interoperability
■ Four dedicated 16-bit TCPWMs
❐ Custom profile and service for specific use cases
❐ Additional four 8-bit or two 16-bit PWMs
Cypress Semiconductor Corporation
Document Number: 002-10375 Rev. *A
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised April 18, 2016