Datasheet > CYBLE-012011-00

CYBLE-012011-00

更新时间： 2024-11-24 18:35:15

品牌	Logo	应用领域
赛普拉斯 - CYPRESS		电信电信集成电路
页数	文件大小	规格书
39页	1019K
描述
Telecom Circuit, 1-Func, SMT-31

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

CYBLE-012011-00 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	,	Reach Compliance Code：	compliant
ECCN代码：	5A992.B	HTS代码：	8473.30.11.80
风险等级：	1.62	JESD-30 代码：	R-XXMA-N31
长度：	19.2 mm	功能数量：	1
端子数量：	31	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	UNSPECIFIED
封装形状：	RECTANGULAR	封装形式：	MICROELECTRONIC ASSEMBLY
峰值回流温度（摄氏度）：	NOT SPECIFIED	座面最大高度：	2 mm
标称供电电压：	3.3 V	表面贴装：	YES
电信集成电路类型：	TELECOM CIRCUIT	温度等级：	INDUSTRIAL
端子形式：	NO LEAD	端子节距：	1.27 mm
端子位置：	UNSPECIFIED	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	14.52 mm	Base Number Matches：	1

CYBLE-012011-00 数据手册

CYBLE-012011-00

CYBLE-012012-10

EZ-BLE™ PRoC™ Module

■ Low power mode support

❐ Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on

❐ Hibernate: 150 nA with SRAM retention

General Description

The CYBLE-01201X-X0 is a Bluetooth^Low Energy (BLE)

wireless module solution. The CYBLE-01201X-X0 is a turnkey

solution and includes onboard crystal oscillators, trace antenna,

passive components, and the Cypress PRoC™ BLE. Refer to

the CYBL10X6X datasheet for additional details on the capabil-

ities of the PRoC BLE device used on this module.

❐ Stop: 60 nA with GPIO (P2.2) or XRES wakeup

Functional Capabilities

■ Up to 22 capacitive sensors for buttons or sliders with

best-in-class signal-to-noise ratio (SNR) and liquid tolerance

The CYBLE-01201X-X0 supports a number of peripheral

functions (ADC, timers, counters, PWM) and serial

communication protocols (I²C, UART, SPI) through its

programmable architecture. The CYBLE-01201X-X0 includes a

royalty-free BLE stack compatible with Bluetooth 4.1 and

provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package.

■ 12-bit, 1-Msps SAR ADC with internal reference,

sample-and-hold (S/H), and channel sequencer

■ Two serial communication blocks (SCBs) supporting I²C

(master/slave), SPI (master/slave), or UART

■ Four dedicated 16-bit timer, counter, or PWM blocks

(TCPWMs)

The CYBLE-01201X-X0 is available in a fully certified and

qualified version (CYBLE-012011-00), and an uncertified version

(CYBLE-012012-10). The CYBLE-012012-10 does not include

an RF shield and is not certified by Bluetooth SIG or refulatory

agencies.

■ LCD drive supported on all GPIOs (common or segment)

■ Programmable low voltage detect (LVD) from 1.8 V to 4.5 V

■ I²S master interface

The CYBLE-01201X-X0 is a complete solution targeted at appli-

cations requiring cost optimized BLE wireless connectivity.

■ Bluetooth Low Energy protocol stack supporting generic

access profile (GAP) Central, Peripheral, Observer, or

Broadcaster roles

Module Description

■ Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield)

■ Castelated solder pad connections for ease-of-use

■ 128-KB flash memory, 16-KB SRAM memory

■ Switches between Central and Peripheral roles on-the-go

■ Standard Bluetooth Low Energy profiles and services for

interoperability

■ Up to 23 GPIOs configurable as open drain high/low,

pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output

■ Custom profile and service for specific use cases

Benefits

■ Bluetooth 4.1 qualified single-mode module

❐ QDID: 79919 (CYBLE-012011-00 only)

The CYBLE-01201X-X0 module is provided as a turnkey

solution, including all necessary hardware required to use BLE

communication standards.

❐ Declaration ID: D029885 (CYBLE-012011-00 only)

■ Certified to FCC, IC, MIC, KC, and CE regulations

■ Industrial temperature range: –40 °C to +85 °C

■ Proven hardware design ready to use

■ Cost optimized for applications without space constraint,

Footprint

❐ 14.52 × 19.20 mm × 2.00 mm - CYBLE-012011-00

❐ 14.52 × 19.20 mm × 1.55 mm - CYBLE-012012-10

■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit

multiply, operating at up to 48 MHz

■ Watchdog timer with dedicated internal low-speed oscillator

(ILO)

■ Reprogrammable architecture

■ Two-pin SWD for programming

■ Fully certified module (CYBLE-012011-00) eliminates the time

Power Consumption

needed for design, development and certification processes

■ TX output power: –18 dbm to +3 dbm

■ Bluetooth SIG qualified with QDID and Declaration ID

(CYBLE-012011-00 Only)

■ Received signal strength indicator (RSSI) with 1-dB resolution

■ TX current consumption of 15.6 mA (radio only, 0 dbm)

■ RX current consumption of 16.4 mA (radio only)

■ Flexible communication protocol support

■ PSoC Creator^™provides an easy-to-use integrated design

environment (IDE) to configure, develop, program, and test a

BLE application

Cypress Semiconductor Corporation

Document Number: 002-02521 Rev. *F

•

198 Champion Court

•

San Jose, CA 95134-1709

•

408-943-2600

Revised April 25, 2017

12 3 4 5 6 7...39

中文翻译

下载PDF

与CYBLE-012011-00相关器件

型号	品牌	获取价格	描述	数据表
CYBLE-012012-10	CYPRESS	获取价格	EZ-BLETM PRoCTM Module
CYBLE-01201X-X0	CYPRESS	获取价格	EZ-BLETM PRoCTM Module
CYBLE-014008-00	CYPRESS	获取价格	Microprocessor Circuit, CMOS, PACKAGE
CYBLE-014008-00	INFINEON	获取价格	Infineon’s AIROC? CYBLE-014008-00 is a fully
CYBLE-022001-00	CYPRESS	获取价格	Multifunction Peripheral, CMOS, PACKAGE-21
CYBLE-022001-00	INFINEON	获取价格	Infineon’s AIROC™ CYBLE-022001-00 is a fully
CYBLE-202007-01	CYPRESS	获取价格	Telecom Circuit,
CYBLE-202007-01	INFINEON	获取价格	Infineon’s AIROC? CYBLE-202007-01 is a fully
CYBLE-202013-11	CYPRESS	获取价格	Telecom Circuit,
CYBLE-202013-11	INFINEON	获取价格	Infineon’s AIROC? CYBLE-202013-11 is a fully

与CYBLE-012011-00相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

39
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

31
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

59
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

55

产品中心

服务支持

精选活动

关于我们

帮助中心

CYBLE-012011-00

CYBLE-012011-00 技术参数

CYBLE-012011-00 数据手册

与CYBLE-012011-00相关器件

与CYBLE-012011-00相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

CYBLE-012011-00

CYBLE-012011-00 技术参数

CYBLE-012011-00 数据手册

与CYBLE-012011-00相关器件

与CYBLE-012011-00相关文章

您还可以找

您在本页遇到什么问题？